By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
In This Article...
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
using the key fob to start the car
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
A Hyundai Sonata Remote Starter Instructions
You are in for a treat if your Hyundai Sonata has a remote start. However, you must understand how to use it in order to make use of this functionality. The procedures are outlined below!
Follow these instructions to remotely start your Hyundai Sonata:
- Begin by using the Bluelink app or fob to lock the doors [even if the doors are already secured].
- Hold down the remote start button after that.
- Before the car starts, the headlights and turn signals will flash.
- After operating for 10 minutes, the Hyundai Sonata will shut off.
- Press the remote start button once more to stop the car.
No matter the weather, having a remote start is a useful feature. We’ll look more closely at how and when to use the remote start option in your Hyundai Sonata in this post. Continue reading for answers to more frequently asked questions about the Sonata’s remote start.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Setting up MyKey Premium
MyKey Premium is 100% plug-and-play in Hyundai and Kia cars with the push button start capability, in contrast to the typical aftermarket remote start system. Simply unhook a few factory wiring harnesses and put in the MyKey Premium harness, with one end connected to the control box. The system is made up of a control box and a number of wiring harnesses.
The MyKey Premium installation was completed until that point. The system (or key fob) does not require reprogramming. Your Hyundai or Kia vehicle will start and keep running for 15 minutes with the doors locked if you simply press the lock button twice on the fob. Just unlock the doors as usual once you get at your car. From there, all you have to do is depress the brake pedal, engage the gears, and take off in a car that will keep you warm in the winter and cool in the summer. The engine will shut off automatically after 15 minutes if you don’t get in your car.
Although the control box and wiring harness installation is straightforward, MyKey Premium offers worldwide shipping, a PDF installation guide, and informative videos of the product being fitted in a variety of Hyundai and Kia cars.
How is the remote car starter reset?
- Take hold of all of your car’s remote starters.
- Place your ignition key in and select Accessory (or press the start button once without pushing the brake pedal).
- Your remote car starter’s Lock button should be pressed.
- After turning it on for five seconds, turn the key back to the “off” position (or press the start button again).
- The on-off cycle should be repeated a total of four times.
- You’ll hear a sound (a “ding,” “ping,” or “buzz”) on cycle number four when you choose the Accessory position. Right now, programming mode is active.
- Lock the remote by holding down the button (s).
- Turn off the car in ten seconds.
- Shut the door, exit the vehicle, and then try the remote.
- If so, that’s excellent!
- It’s time to call the dealership if it doesn’t.
Can a Hyundai be remotely started?
A subscription to Bluelink Remote Package is necessary. Only automobiles with an automatic transmission or a dual clutch transmission that are equipped with push button start are eligible for remote vehicle starting. Not offered on all trims and models. Use Remote Start only if it is secure to do so.
With only a few taps on the app or a simple command to Alexa, you can remotely start your Hyundai’s engine, adjust the temperature inside, and turn on the defroster.
How can I tell whether the remote start on my Hyundai is working?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Accord, Civic, and Insight from Honda
- GM automobiles (2003 – later)
- Honda Accord
- ZDX and TLX Acura (2010 – later)
- Tribeca, Legacy, and Outback Subaru models (2007 – later)
- Navara Altima
- Fusion and the Ford Mustang
- Corvette Camaro
How can I start my Hyundai Elantra remotely using the key fob?
Press the lock button on your key fob while holding down the remote start button to activate the remote start function for your Hyundai Elantra. Alternatively, utilize the Blue Link Remote Package and your smartphone. When your parking lights flash, you’re all good to go! A
Sometimes getting into your car is about the last thing you want to do, whether it is 115 degrees and sunny or 15 degrees and snowy. Thankfully, technology has saved the day! You may start your Hyundai remotely in advance and start your commute without risking burning your hands or freezing your buns thanks to this feature. A
How do I use my Hyundai Santa Fe key fob for remote starting?
- Once on the lock button
- Headlights will flash, and a confirmation beep will sound.
- To hold, press the “hold” button on the key fob’s bottom.
- You can proceed now that the automobile is turned on.
After locking the door, you should hold the remote start button for 4 seconds. It only works if the button is held down for at least 2 seconds.
Once your Hyundai is started, the previously selected settings for the heating and cooling systems will operate. If no additional action is taken after 10 minutes, the car will turn off once more. The automobile will turn off if you hit the remote start button once more.
If your Hyundai has Bluelink technology, which enables your car to communicate with a smartphone, you can start your Hyundai right away from your phone. In fact, you may set the temperature to your preference and turn on features like the defroster. Three years of free maintenance are included with Bluelink-equipped Hyundai automobiles. You can manage features like locking and unlocking your doors, on-demand notifications, diagnostics, and even a remote auto locator tool for those busy days of shopping or following a performance.
For a variety of factors, remote starting is all about convenience. Everything from changing the cabin’s temperature to jump-starting your engine to just alerting the other passengers that it’s time to leave may be done using remote start. The ability to start a car without leaving the house or skip the grocery store checkout line are typically the first things that come to mind, although different people value different kinds of convenience. There are various advantages of Santa Fe remote starts to take into account:
The CoPilot app isn’t just for purchasing a car; it can also be used to keep track of recalls and receive recommendations on which regular maintenance activities are most crucial.
Has my Hyundai Elantra remote start been installed?
It does, indeed. Simply make sure your car is correctly connected to the BlueLink Connected Vehicle System and that the software has been downloaded and set up on your phone. With the help of this app, you can remotely turn on the heater and start your Elantra so that everything is ready to go when you step outside.
How can I turn on remote starting?
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds. When the external lights flash twice, the car will start.
Hyundai is capable of remote starting without Bluelink.
No, only Hyundai vehicles with push-button start key fobs and either an automatic transmission or a dual clutch transmission are eligible for the remote start option (DCT). Even said, not all models provide Remote Start. In addition, using Remote Start requires a Blue Link Remote Package membership.
How long does the Hyundai remote start function?
You can start the car remotely from a fair distance away by using this option. For ten minutes, this feature will be activated on all Hyundai cars.
What is a remote start’s mechanism?
A vehicle’s specific radiofrequency is used to start it. Typically, it is encrypted to prevent hacking by would-be thieves. Once the engine begins, a vehicle’s remote start system locks the doors to prevent unauthorized entry. The device will turn off the engine if someone does get into the car and depresses the brake pedal to shift into gear.
Only when the owner enters with the key in hand can the car start. When that happens, they can shift into drive and leave.
When a remote start device is used, the engine typically shuts off after 10 to 15 minutes if the driver does not show up and start the vehicle. Additionally, most key fobs and smartphone apps contain a “kill switch” to turn the car off in case the driver changes their mind.
Can you damage your automobile with a remote starter?
This is a typical misunderstanding of remote starters. It’s not accurate, and it’s unknown why individuals are led to believe this. The general opinion among mechanics is that remote starts are beneficial for your engine, particularly for those who have turbocharged or diesel motors.
Because they warm up the engine before usage, remote starters are beneficial for your vehicle’s engine. The oil in your car thickens in cold weather. The viscosity of the oils is increased during engine warming to ensure proper circulation. Thus, preheating your engine makes your drivetrain last longer.
How can I tell whether my car has remote starting?
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.