- Deactivate the AWD LOCK mode when traveling on paved surfaces by pushing
- When the AWD LOCK mode is turned off, the drivetrain may experience a shock.
In This Article...
muncedog
When required, the awd turns on. When the rear wheel is required, the ratio remains at 50/50 rather than 80/20 (I believe), so you won’t experience the hop of conventional 4wd. I have worn mine a couple times and have not noticed any differences.
So with the lock engaged, it isn’t always 50/50 but only when the front wheels slip? It is strange that it is labeled a “lock,” and it is debatable whether it is as effective as a real lock, for example, when you know you are in dangerous territory and don’t want it bouncing on and off!
CDN~Santa-Fe
Hello everyone I actually just signed up yesterday, so I guess you could say I’m kind of new to the site. I was just curious about my car.
I have a 2003 Hyundai Santa Fe 2.7L V6 GL/GLS with ABS, however I’m not sure how well it works with 4WD. It’s a front-wheel drive SUV, but the other day I wanted to test it out in the snow so I purposely got stuck to see if my back muscles would tire out. They didn’t, and normally with 4WD around coners if you apply the gas you will fishtail a little; mine doesn’t at all. Is there a way to turn it on? or must I switch it to sport mode, or is it broken? Someone, please, assist! Thank you so much, grin.
bak1057
The manual for my AWD 2022 Calligraphy refers to a 4WD Lock Button, but I can’t find it among the other switches! Does this model have one or is everything automatic?
To the right of the gear selector buttons, near the center of the sizable spherical knob. When you interact, it will change colors as you press in.
How does a 2004 Hyundai Santa Fe activate 4WD?
The 4WD traction is there anytime the driver wants it thanks to the automatic system; there are no buttons to press or levers to turn. Additionally, the Santa Fe 3.5-liter has specifically tuned shock absorbers and spring rates.
The Hyundai Santa Fe has 4WD, right?
Would you like to see how far Korean automakers have advanced in terms of quality and appeal? There is no need to look past the Hyundai Santa Fe. Although the second-generation model went upscale with a smoother design and plenty of equipment, it is the current car that has elevated Hyundai to a premium level. Its attractive lines are a long cry from those of the boxy original from 2001.
With its prominent chrome grille, sharp headlights, and limited window area, the design is appealing. Black plastic trim provides an air of off-road sophistication. Additionally, the premium inside has a sleek design and is fully equipped. Choose a Premium variant to enjoy extras like leather seat coverings, climate control, auto lights and wipers, a reversing camera, and satellite navigation. There is a seven-seat model as well, but we would only advise this if the additional space was really necessary because the claustrophobic last row is really only appropriate for little children. Additionally, the five-seater has a boot that is 585 liters larger than the seven-seat version, or 69 liters more.
The Santa Fe is a useful family vehicle that feels secure in slick driving situations thanks to its sophisticated 4WD technology. Hill descent control aids in maintaining order, and a 4WD lock improves its off-road capability. Additionally, the Hyundai is just as simple to drive when towing a maximum 500kg load thanks to the Trailer Stability Assist feature of the included ESP.
On a Hyundai Santa Fe, how do you deactivate AWD?
Selecting the ALL Wheel Drive (AWD) transfer mode when operating your car with all four wheels. By pressing the AWD LOCK button while on a regular road, the AWD LOCK mode can be turned off (the indicator light goes off)
The Hyundai Santa Fe has 4WD or AWD, right?
Models from Hyundai with All-Wheel Drive AWD-equipped trims are available for the 2017 Hyundai Tucson, 2017 Hyundai Santa Fe, and 2017 Hyundai Santa Fe Sport. We occasionally even have 4WD vehicles from other brands and models interspersed throughout our selection of pre-owned Hyundai vehicles.
Hyundai is it a 4WD?
All-wheel drive options on our collection of Hyundai crossovers and SUVs deliver constant power to all four wheels. You can drive any all-wheel drive Hyundai with confidence knowing that it will provide you the traction, grip, and control you require.
How does all-wheel drive on the Hyundai Santa Fe function?
All-wheel drive that is automatic. TorqTransfer System ITM-I by BorgWarner (interactive torque management I). The system detects front-wheel slippage in a vehicle and switches power automatically to the rear wheels using electronic sensors and microcomputer controllers. The system then decreases or shuts off power to the back wheels once the front wheels are no longer slipping.
The decreased slippage raises efficiency levels that improve traction, handling, and fuel efficiency of the vehicle. To further improve traction and stability, the ITM-I can integrate with additional systems including antilock brake systems and electronic stability programs.
Do you believe that the details provided about the Hyundai Santa Fe I 3.5V6 2002-2009 are accurate? Send us your information at or post a comment below.
Do Hyundai vehicles have four wheel drive?
Hyundai AWD vehicles are designed to get you there, regardless of the state of the road. Most SUV models come with our most sophisticated system, HTRAC AWD (Hyundai TRACtion All Wheel Drive). For each wheel, HTRAC measures 50 inputs from the vehicle over 100 times per second to determine how much torque is required. This clever mechanism helps you retain traction by rerouting power between the front and back axles and applying light braking pressure to the left and right wheels if it notices slippage.
How do I switch my 2020 Santa Fe’s drive mode?
Drivers of the new Santa Fe can select from four drive and three terrain settings using a rotary knob in the center console. The driver only needs to press the button in the center of the knob to switch between the drive and terrain modes. On both the AVN screen and the digital cluster, the driver can see whatever drive or terrain mode they are using.
How does the Santa Fe perform in the snow?
This is one of those crucial elements that determines whether or not you will have traction on snow. At 8 inches and higher, ground clearance reaches its ideal value. However, if you reside in a region that receives less than 3–4 inches of snow annually, then these 5 inches are actually not that bad.
With the Santa Fe, the ground clearance is a remarkable 8.2 inches. On a powder day, only when the snow is at least 10 inches deep, will you run into problems. But you can get through the snow if you have good winter tires.
Make sure to avoid the piles that the plows have left on the sides because vehicles can become stuck there. You can safely drive over the tire prints left after the plow by other vehicles.
What does “AWD” mean on my Santa Fe?
While your car is off, check underneath for the axle shaft. The shaft simply has the appearance of a broad bar running from the front to the back axle. You have an all-wheel drive car if you observe an axle shaft connecting the front and rear axles.
What drives Hyundai AWD?
Hyundai HTRAC(r) AWD is an innovative multi-mode technology that offers all the advantages of all-wheel drive traction when more traction is required while maintaining front-wheel drive’s effective fuel-economy ratings under regular driving situations. An electronic variable-torque-split clutch with active torque management technology is used in this cutting-edge system to transfer power to the front and rear axles as needed while continuously monitoring traction.
To maximize fuel efficiency, the Hyundai HTRAC(r) AWD system will run in front-wheel drive under normal driving circumstances. Torque is sent to the rear axle to increase traction and performance when a loss of traction is detected by the sensors or when you opt to use the driver-selectable modes. Hyundai HTRAC(r) AWD’s driver-selectable modes provide you more control over performance and torque distribution than many rivals. There are three drive modes available to drivers in a few Hyundai vehicles with Hyundai HTRAC(r) AWD: Normal, Sport, and Smart.
Hyundai’s AWD is it always on?
The Hyundai AWD system offers the driver three alternative driving modes while remaining “always on,” which boosts efficiency. Comfort. Smart. Sport
What does the Hyundai AWD lock button do?
When the AWD lock button is activated, a 50/50 power bias is possible up to 20 mph/30 km/h. If you’re driving on a bad winter day with a lot of snow, for instance, you can leave it on. Running in sport mode while using an AWD also partially engages the AWD. This is not supported by any paperwork from Hyundai; rather, it is supported by documentation from another manufacturer. According to Toyota, the AWD system in my wife’s AWD Rav4 engages with 5% of its power in the back and 95% in the front when the vehicle is in sport mode. It gives the car a little “push” if you engage it at, say, 60 mph on the Rav4, and the Kona experiences the same thing. In sport mode, you are receiving some sort of full-time AWD involvement. I observe this when towing with the Kona as well. When you engage AWD, let’s say at 60 mph, you hear the load drop because both diffs are now bearing the towing weight.
Can AWD be activated while driving?
This article is for you if you want to know when it is safe to engage 4-wheel drive and when it is not. We’ll go over the precautions to take and the right way to convert your 4WD from 4H to 4Lo. This article goes into detail on what happens to the drivetrain and other parts of the car when you put it in 4H while you’re driving.
You can go from 2H to 4WD safely when traveling at speeds lower than 60 mph. You must slow the car down to 5 mph without depressing the gas pedal and put the transmission in (N) Neutral before changing from 4H to 4-Lo. Older 4WDs without automatic locking hubs necessitate a complete stop, egress, and manual engagement of the front hubs. When finished, can you activate 4H from the cabin?
For a safer, more controllable driving experience, let’s look at when it is definitely safe to use your 4WD and which surface conditions require it. We’ll go into further detail on dangerous driving conditions like snowy roads, ice surfaces, damp surfaces, and soft loose sand, among others.
Are all Santa Fe models AWD?
Hyundai is regarded as one of the best automakers in the world. One of Hyundai’s hallmarks is the union of technological innovation and dependability. These characteristics are seen in their Santa Fe series of small SUVs. If you’re looking for one, we consulted authorities and reliable reviewers to assist you in determining whether the Sante Fe is the right vehicle for you.
The fourth-generation (2018-present) Hyundai Santa Fe is available with an All-wheel Drive (AWD) configuration. Customers may also choose the typical Front-wheel Drive (FWD) setup. The Santa Fe vehicles that come with All-wheel Drive are listed below:
- All trim levels for 2018
- All trim levels for 2019
- All trim levels for 2020
- All trim levels in 2021
- All trim levels in 2022
Knowing that Hyundai’s Santa Fe is capable of all-wheel drive (AWD), you may be curious about all the trim options or the technological advancements it may bring to the road. Go read the remainder of the article for additional information on this.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!