How To Turn Off Traction Control Hyundai Sonata?

What Does the Traction Control Light Mean When It Is On? Typically, the ABS light and the traction control light both illuminate at the same time. If the light continues to illuminate, there can be an issue with the traction control mechanism. Make an appointment and bring it in as soon as you can for service.

People also inquire as to how to completely deactivate traction control. If available, a switch or button should display a picture of a car with wavy lines underneath. To disable traction control, press this button. Once the TC is now turned off, this should show up as a continuous yellow light on the dash.

Also, why am I unable to turn off my traction control? There are several probable explanations for why your traction control light won’t turn off. The most frequent cause is that you’re trying to drive on slick ground.

Know how to reset your traction light as well. Find a safe place to pull over as soon as your traction control warning light illuminates while you are driving. Start your car again after turning it off. If the traction control warning light continues to remain out, there was only a brief malfunction and you are OK to go.

a signal light

The indicator light turns on when the ignition switch is switched to ON, then it disappears.

if the ESC system is working properly, off. When the ESC is engaged, the indicator light blinks.

When the ESC is disabled using the button, the ESC OFF indication light turns on.

Driving with different tire or wheel sizes could result in the ESC system failing.

for safe driving on curvy, snowy, or icy roads by slowing down. drive carefully and

when the ESC indicator light is flickering or when the ESC light is on, don’t try to accelerate.

  • When practical, ESC should be enabled for daily driving.
  • Press the ESC OFF button while in motion to turn off the ESC.

Never turn the ESC off while it is running (ESC indicator light blinks).

The car can lose control if the ESC is disabled while it is in use.

  • Make sure the ESC is engaged when driving the car on a dynamometer.
  • The ABS and brake systems continue to function normally after turning the ESC off.


There is a noticeable difference between having TC on and off, regardless of what you guys do. Leave the TC on from a complete stop and floor it on a snow-covered road. The revs will increase and then stop at about 3K, at which point you’ll start to pick up speed when traction becomes available (don’t be a ***** about it).

then carry out the same action without the TC. All you get is wheel spin, and while you will eventually start moving, you will also cause tire burns and snow to fly around.

Give it a try. My sonata has been able to pass in areas that are inaccessible to vehicles without TC.

How does automatic traction control get turned off?

Depending on your vehicle’s manufacturer, this might change. If available, a switch or button should display a picture of a car with wavy lines underneath.

Once the TC is now turned off, this should show up as a continuous yellow light on the dash.

Depending on the year/model, on a Ford you can either push and hold the traction control button or use the steering wheel controls on the instrument cluster to navigate the menu. To access “settings,” use the down arrow while looking left and pressing the back arrow on the left side of the steering wheel. After selecting “ok,” choose “Driver Assist” by hitting “ok” once more. The word “Traction Control” will then show; press “OK” once again on the steering wheel.

Volkswagen owners should switch the vehicle to auxiliary mode (ignition on but not engine). Press the triangle button to activate the hazard warning lights, then depress the gas pedal five times. The TC will switch back on automatically when the car moves 5 feet. On some VWs, this might not be possible.

Keep in mind that occasionally this may also turn off other safety functions, including trailer sway control (if equipped).

Can the traction control be disabled?

Since 2012, traction control has been a required safety feature on all American-sold vehicles. There aren’t many situations where the driver needs to turn it off, even though it can be turned on and off whenever they want. When feasible, leave it on as it is considerably safer.

Why is my Hyundai Sonata’s traction control light on?

Normally, the ABS light and the traction control light both illuminate simultaneously. Together, these two systems function. If the light flashes, it’s an indication that the road is hazardous for driving. If the indicator continues to illuminate, there may be an issue with the traction control system.

Is traction control on or off for me?

When switched off, you could see that your car handles when navigating slick terrain differently than you’re used to. You should therefore always keep your traction control engaged.

How can I reactivate my stability traction control?

On the dashboard, there is a yellow warning light called the Service StabiliTrak Light. When the StabiliTrak Control Module malfunctions, it comes on. You must reset your StabiliTrak Control Module if the Service StabiliTrak Light illuminates. You can accomplish this by unplugging the battery or by forcing a reset. Here is a brief guide.

  • Leave the car running for roughly 15 minutes after turning it off.
  • Don’t start the car; just turn the key to the on position.
  • Five times in the space of five seconds, depress the gas pedal. Use the clutch if your car has a manual transmission.
  • At this point, the light ought to turn off. If it doesn’t, turn off the engine and give it another go after 10 seconds.
  • Until the light is turned off, repeat this step.

A qualified mechanic should be consulted if you require assistance when executing a force reset on your vehicle. Amateurs shouldn’t attempt this since they risk escalating any harm already present in the problem.

My traction control light won’t turn off; why?

The traction control system regulates the steering and stability of the car and turns on if it notices any traction loss. The Powertrain Control Module (PCM), which monitors the vehicle’s performance and strength in poor weather conditions, communicates with electronic adjust sensors at the ends of each of the four wheels to control traction.

It works by figuring out which wheel has to have brake pressure applied, preventing the car from sliding, and lowering engine speed. To keep the vehicle stable, the traction control system collaborates with the anti-lock brake system.

In order to correctly operate the car at any time, the vehicle’s computer uses data from electronic sensors regarding the speed of the four-wheel revolution as well as the horizontal and vertical movement of the vehicle.

Any number of issues, such as faulty steering angle sensors, broken wheel speed sensors, rotational speed sensors, or a problem with the steering rack, may be indicated by an illuminated traction control indication light. You might occasionally need to reprogram the control system.

Why is the traction control light on in my vehicle?

The wheel-speed sensors, wiring, connectors, control module, and other components might occasionally malfunction or experience intermittent issues, just like with antilock brake systems. At each wheel are sensors, cables, and connectors that are exposed to a hostile environment that includes potholes, water, snow, dirt, tar, stones, other debris, and more. As a result, they take a hammering and are susceptible to failure.

A dashboard warning light that indicates the system is malfunctioning will typically come on, disabling the traction control and, in certain situations, the ABS. (When ABS is disabled, regular braking should still be possible; antilock action won’t be present.) This is distinct from the warning light’s brief illumination when the vehicle is started or when the system senses that a wheel is spinning freely and improves traction, which happens when the system detects this.

When one drive wheel spins more quickly than the others, wheel-speed sensors are designed to notice, signaling that the car is slipping or losing traction. The device will then turn down the engine or put the brakes on that particular wheel. The other drive wheel or wheels with stronger traction might get power by braking the spinning wheel. (This idea is what made it possible for some vehicles’ ABS-based traction control to replace their limited-slip differentials, which accomplish the same thing.) You will need to raise your foot off the accelerator to control tire slippage if traction control is disengaged.

When road grime or debris covers the wheel-speed sensors, the warning light may occasionally illuminate. This issue has affected a number of recent GM models, and in order to fix it, GM sent dealers a technical service bulletin.

When the traction control warning light remains illuminated, the system has to be checked because you aren’t receiving any assistance from it to control traction. Traction control doesn’t function until you’re driving on slick surfaces, so getting it fixed isn’t as critical as it would be for disabled ABS or stability, which are arguably more necessary as safety features. By easing off on the gas pedal during acceleration, a driver may often avoid wheel slippage. Typically, a scan tool is needed to read the trouble code that caused the warning light in order to diagnose problems. Scanners can help identify the problems (such as a faulty speed sensor or connector) and the wheel(s) involved (s).

Even while traction control has advantages, there are situations when it can get in the way of moving forward, like when pulling into or out of a parking space with rutted snow. Some systems are so sensitive that they quickly limit power or apply the brakes so hard that you stop moving at the slightest sign of wheel slide. Fortunately, most cars have traction control systems that can be disabled, allowing you to use the tried-and-true method of rocking your car back and forth to get out of the snow.

Why is the traction control light on in my vehicle?

The traction control light may indicate an issue that isn’t yet “hard coded,” or a condition that won’t go away permanently, if it illuminates sporadically. Use particular caution on slippery roads if a light is flickering since it could also indicate that the system is not entirely functional.

When traction is lost, such as during snowy or rainy conditions, many traction control systems may turn on the warning light. Usually, the light appears when the system steps in to keep traction. To become familiar with how your traction or stability system functions, it’s a good idea to study the relevant part in your vehicle’s owner manual.

The traction control system has been turned off and there is no traction control accessible if the traction control light turns on and stays on without blinking. The driver information center may even send out a message informing the motorist that the traction control system has been disabled and urging them to drive carefully, especially in wet conditions and when dealing with ice and snow.

Having the car correctly diagnosed at a reputable repair facility is the only method to effectively treat either of the aforementioned concerns. Always request a complete computer system scan from the repair shop. The light may not always be caused by a problem with the traction control system. The traction control system may occasionally first exhibit symptoms of an engine management system issue, such as an intermittently bad throttle position sensor in the electronic throttle control.

The powertrain system’s fundamental mechanical parts also need to be thoroughly evaluated. Wheel slide can be caused by anything that would result in a jerky or rough application of power, which makes worn drivelines, axles, and constant velocity joints questionable. Wheel spin can be caused by even a forceful transmission shift or a seriously misfiring engine, which will turn on the traction control light.