There is a rubber grommet on the brake pedal where it connects the brake light switch, which is a straightforward remedy for the brake lights that were staying on. The grommet has become worn,
In This Article...
Recalled Hyundai Sonatas have brake lights that stay on.
Due to a problem with the brake pedal assembly that, in certain cases, prevents the brake lights from turning off, Hyundai is recalling 304,900 Sonata cars from the 2011 and 2012 model years.
The brake pedal stopper pad, which can eventually wear down and allow the brake light switch to stay on after the driver lifts their foot from the brake pedal, is at problem. In these circumstances, the Sonata is capable of continuing to drive while the brake lights are illuminated in the “braking” position, which can give other motorists the wrong impression. Additionally, this issue can make it possible to shift out of park without depressing the brake pedal. Even while Hyundai reports that the second issue hasn’t resulted in any accidents, it is this second issue that is more concerning.
The Hyundai Sonata automobiles produced from December 11, 2009, to June 30, 2011, are subject to the recall campaign.
On January 11, Hyundai will begin the recall procedure, and dealers will apply the repair. Owners may bring their cars in to have this problem addressed at no charge; the fix simply entails installing a new stopper pad.
Owners should reach Hyundai customer service directly at 1-855-671-3059 and reference recall number 136 prior to the start of the recall. They can also visit the National Highway Traffic Safety Administration (NHTSA) website at www.safercar.gov or dial the vehicle safety hotline at 1-888-327-4236.
Ramey, Jay
For his own personal use, Jay Ramey has been drawn to the more adventurous end of the reliability spectrum because he spent his childhood around really unusual European cars.
how brake lights operate
The brake pedal, striker, brake light switch, lights, fuses, and wiring are just a few of the components that make up your brake system as it relates to your lights. The attached brake light switch makes touch with the pedal when you depress it, allowing the brake lights to turn on.
Through the electrical components, this switch informs your brake lights that the pedal has been depressed. When you take your foot off the brake pedal, the striker releases the brake light switch, turning off the brake lights. Despite the fact that this is a condensed explanation of how brake lights function, damage to the striker or brake light switch may result in brake light problems.
a word of advice: Leaving your brake lights on while your car is stationary will drain the battery. To prevent your battery from being drained, it’s critical to quickly fix brake light problems.
How is the emergency brake on a 2020 Hyundai Sonata turned off?
I unintentionally activated my parking brake, and I’m unable to turn it off at the moment. How does a 2020 Hyundai Sonata’s emergency brake work?
In less than two minutes, find out if your auto insurance is being overcharged.
The electronic parking brake (EPB) is located in the buttons right below the vent to the left of the steering wheel on the 2020 Hyundai Sonata.
As soon as the engine is turned on, press and hold the brake pedal while holding down the EPB switch to release the parking brake. Your dashboard’s parking brake warning light ought to turn off.
If the EPB light continues to illuminate after it ought to have been turned off, there might be a brake system fault, which could be a significant safety risk. In this situation, you should refrain from driving and seek immediate assistance from a professional.
Is it time to put the breaks on your current auto insurance policy or does it provide you with the protection your 2020 Hyundai Sonata deserves? Jerry has got you covered if you’re seeking for a more effective approach to shop for auto insurance.
Shopping for auto insurance is more efficient and simple than ever with Jerry. Simply respond to a few brief questions, and Jerry will present you with a collection of customised quotations from the best auto insurance companies. You can then choose the appropriate level of coverage at the appropriate cost.
Starting up with Jerry takes less than a minute, and the typical user saves $887 annually on auto insurance!
How can I switch off my brake lights?
One of the most crucial parts of a car is its brake lights (or taillights). They make use of a switch that activates the bulbs when the brake pedal is depressed. Brake lights flash when you are ready to slow down or stop, alerting any vehicles behind you. However, when they become stuck, these lights lose their function as a safety feature and may endanger both you and other people.
Circuit failures, issues with the brake assembly, and low brake fluid levels are some of the most typical causes of brake lights that remain on. While some problems are easy to diagnose and resolve, other problems are brought on by untidy auto parts.
Here are some typical solutions for brake lights that won’t go off:
- Check for damage on the brake light switch.
- Putting out blown fuses
- replacement of the brake light switch
- Keep the brake pedal bumper in working order.
- Change any burned-out bulbs.
- Remove the vehicle battery.
- Keep the brake pedal clean.
- Make sure the brake pedal effectively activates the switch.
- Ensure that your brake sockets are spotless.
- Don’t reduce your BCM.
- have enough brake fluid
- Turn off the parking brake.
The most popular solutions to brake light sticking are listed in this article. If necessary, it also explains how to replace your bumper and brake light switch. Stay tuned to discover more about how to maintain the appropriate operation of your car’s safety features, which is what this article seeks to provide for vehicle owners.
Why is my Hyundai Sonata’s brake light on?
The brake warning light is a major matter. When you see it turn on, ensure sure your emergency brake is not engaged, then halt your vehicle as soon as you can. Your brakes could not operate at all if you have insufficient brake fluid.
What causes a Hyundai Elantra’s brake lights to remain on?
Bad Switch: A faulty or failed switch is a typical cause of the Parking Brake light remaining on. You may quickly verify this by jiggling the handle once it has been lowered. The switch is most likely to be the problem and needs to be replaced if the light goes out (or goes out and comes back on).
If the brake handle is not fully down, there is another factor that could cause the light to remain on. Verify again that the parking brake is released and that the handle is fully lowered. The light will remain on if the parking brake cable is under any stress.
Parking Brake Not Disengaging: Occasionally, the parking brake itself is the source of the issue rather than the switch or the wires. The dash warning light will remain on if the brake does not release when the handle is dropped.
Low Brake Fluid: Your Parking Brake light is a multipurpose device that is intended to turn on when the reservoir’s fluid level falls below a specific level. As the fluid level fluctuates, you might see the light turning on or off when making turns.
The brake fluid level sensor in your master cylinder is malfunctioning. It is sometimes integrated into the reservoir cap, and other times it is positioned on the side of the sensor. The Parking Brake light will come on if the sensor malfunctions or becomes faulty.
Uneven Fluid Pressure: If your automobile has uneven brake fluid pressure in one or more lines, it may influence how well it can stop and may even cause it to pull to one side or the other. The parking brake light in your dash can also be activated by it.
My brake lights won’t turn off, why?
A broken brake light switch is a common reason why a car’s brake lights won’t turn on. This part is attached close to the brake pedal under your dash. Your light switch may be stuck closed or the component may have failed if your lights are out.
Other signs of a broken brake light switch include malfunctioning brake lights, impaired cruise control, a car that won’t shift out of park, and brake lights that come on while you’re driving.
Why do my brake lights remain illuminated while the car is off?
Your battery will become discharged if your brake lights are left on. While the automobile is off or until this problem is fixed, you must unplug your battery.
The brake light switch sticking closed is the most likely reason why the brake lights are still on. If the lights don’t turn off, you might try unplugging the brake light switch at the pedal. If they do, a new brake light switch is required. If not, you will require more electrical diagnosis.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Are the brake lights on the Hyundai Sonata being recalled?
VIN Verification Verify A VIN is what? Hyundai has made the decision to replace the stop lamp switches on various vehicles with model years 2007–2011 as part of a voluntary safety recall in the United States. Affected models include certain Accent, Elantra, Genesis Coupe, Santa Fe, Sonata, Tucson, and Veracruz vehicles.
Why do my brake lights continue to be on?
When the brake pedal is depressed, the brake lights, which are a component of the tail light, turn on. The most frequent reason for brake lights remaining on when the car is off is a faulty brake light switch or brake light switch stopper.
In park, do the brake lights activate?
Many automobiles have a single globe that houses both the braking and tail lights. In other words, both lights have the same external covering. Your car’s may be a little different, with individual globes. In contrast to brake lights, which turn on instantly when you hit the brakes, tail lights are activated by turning on your headlights or applying the parking brake. The brake lights are a brighter red than the tail lights, which are typically red on cars. White back-up lights are also included in your rear lights.