Clearing the codes with an OBDII scanner is the right technique to restart the ABS light on a Santa Fe. You will need to manually turn off the warning light by connecting a diagnostic device and then erasing all the error codes associated with the ABS system if it doesn’t do so after you fix the problem.
In This Article...
What the ABS light on a Hyundai Santa Fe means
We will now move on to the subject that you are undoubtedly more interested in: what does an ABS warning light on a Hyundai Santa Fe mean? First of all, because it is orange, turning it on indicates a problem with your ABS system. You should adjust your driving and avoid taking any risks because the ABS will go into safety mode whenever the ABS warning light is on. The following issues can be indicated by the Hyundai Santa Fe’s ABS warning light:
- Simple short circuits, faulty wiring, relay, or fuses are all potential causes. Check it using a pressure gauge.
- An erroneous ABS sensor Your Hyundai Santa Fe’s ABS light will turn on if one of them fails.
- Your Hyundai Santa Fe’s ABS hydraulic block: If it is damaged, it’s conceivable that the indicator light will turn on and your ABS won’t function.
- The ABS computer: Being the hub of all decisions made to operate your ABS, if the computer has a problem, the light will unavoidably turn on.
Your ABS Dashboard Warning Light Reset
First, disconnect your automobile battery’s positive cable. Then, maintain your foot firmly on the brake pedal to shut off the car’s electrical system. The core computer of the car will be reset as a result. Reconnect the cord to re-establish electricity. This should reset the light if the system doesn’t still have a problem.
Step two: You might need to replace the ABS sensor if the light returns after being reset. To do this, unhook the sensor’s wire and detach the housing from the sensor, which should be affixed to the wheel hub. Next, mount and attach a fresh sensor. It’s possible that using the aforementioned technique, you’ll still need to restart the computer.
Step Three: If the light continues to illuminate, you should utilize an ODB code reader to identify the issue because the car still thinks there is a problem that justifies the light. Take your car to a shop to have the issue identified and fixed if you don’t have an ODB code reader.
What to do if it starts
You don’t need to do anything if your ABS light illuminates when you turn on your car and then goes out; this is just a simple bulb check.
If the light comes on while you’re driving, your system has encountered a malfunction. While you don’t necessarily need to stop right away, you should get the system serviced as soon as you can. Your traction control, stability control, and other connected systems depend on your abs system operating correctly. Additionally, keep in mind that your car might not be able to stop in time if you do find yourself in an emergency circumstance where you must brake suddenly.
A skilled mechanic is required to diagnose the majority of abs system repairs. However, you can at least check the fluid level before going to the shop if you don’t mind opening your hood. The majority of ABS systems employ an independent reservoir from the braking system itself. You might be able to resolve the issue yourself if you can find the reservoir and fill it up to the necessary line. Make that the brake fluid is fresh and that the correct type is being used. Usually, the reservoir or reservoir cap will indicate what kind of fluid is required.
What should I do if the brake and ABS lights are on?
- The ABS brake light does not indicate that you cannot brake at all. Instead, it indicates that both you and your brakes are now independent. If the weather is poor, your brakes will operate like they did before ABS. When you need your brakes the most, they could stick if there is no regulation. You must immediately have our service crew look it over if the light stays on. The ABS is a crucial safety element to maintain because it aids in vehicle control and shortens stopping distances.
- Your car is no longer safe to drive if both the ABS and the brake system light come on simultaneously. This indicates a significant issue with the vehicle’s braking system, and driving nevertheless puts you and other people in danger.
The sensor is sometimes referred to as the transmission speed sensor because of its location on the transmission of the car. To instruct the transmission when to shift, it transmits data to the engine’s computer and the speedometer. Make careful to have an Earnhardt Lexus specialist look at your car if your Lexus’s speedometer is broken or if shifting issues are accompanied by a check engine light.
Although Lexus cars receive high safety ratings, driving might be hazardous if they aren’t working properly. It’s crucial for the safety of your car that you don’t disregard check engine lights. By the time these lights come on, the issue has likely gotten worse and might even be endangering other parts of your car.
Can AutoZone examine the cause of my ABS light’s on?
Unfortunately, reading your car’s codes is the only way to determine whether the ABS is the cause of the issue. As part of our Fix Finder service, AutoZone can scan your codes, or if you already have a scan tool, you can do it yourself. Reading the codes makes it easier to identify the true issue
How can the ESC light on a Hyundai Santa Fe be reset?
The ESC operates To turn off ESC, press the ESC OFF button for at least a half-second after turning the ignition ON. (The ESC OFF indicator will turn on.) Press the ESC OFF button to activate the ESC (ESC OFF indicator light will go off)
Why does the ABS light continue to illuminate?
The presence of an ABS indication light on your dashboard indicates that there may be a problem with your system and that you should have it checked properly. This indicator normally illuminates for one of four reasons: either the ABS module is broken, the fluid reservoir is low on fluid, the wheel speed sensors are damaged, or the system is off.
Ineffective ABS Module In fact, the traction control system in your car and the ABS have certain crucial parts in common. A device called traction control keeps all four wheels on the ground moving easily. It will cut off power from your engine until it regains steady traction if it notices that one wheel is beginning to spin erratically. This is intended to stop you from unintentionally exerting too much power, which could cause you to slip out of control. However, because your traction control and ABS share a control module and self-diagnostic system, they occasionally clash. The ABS light may illuminate in addition to the traction control light occasionally, however there are other situations when the ABS system is at fault. To pinpoint the precise problem, your car needs to be professionally diagnosed.
The fluid reservoir has low levels. Your brakes are hydraulic, which means they work by closing your brake pads and stopping your car by applying pressure from a cylinder against a fluid. This implies that the fluid level in your brake system must be steady and continuous. The volume of fluid will decrease and your brakes won’t function properly if there is a slow leak or if the fluid is allowed to evaporate out. Usually, sensors on your computer can find this, and if it does, it will turn on the ABS light.
Wheel speed sensors that are broken Wheel speed sensors are a piece of hardware that provide information to your computer about the individual speeds of the wheels. If the computer notices a deviation from these speeds, your traction control system will alter or switch power to another wheel to make up for it. However, a speed sensor can’t convey this information accurately if it becomes dusty or stops operating. It typically disables your ABS and/or traction control systems until you restart your car or the issue is fixed rather than making a ton of adjustments.
Your System Has Been Shut Down You might be surprised to learn that you can switch your traction control or ABS on and off. The indication light on your dash will often illuminate when the system is turned off to let you know that this crucial safety feature is malfunctioning. There is a good probability your system may have unintentionally turned off if only your traction control or ABS indicator is illuminated. Whether you’re unsure of where the switch is, check to see if you might have accidently bumped it. If so, refer to your owner’s manual.
Can the ABS light be reset at Autozone?
general intent Because there is a distinct processor for the ABS system, OBD II scanners like Autozone may not be able to read ABS system problems; for this reason, it displays a different light from the CEL or MIL check engine light. Thus, it is unable to read and reset the codes and lights for the ABS (or SRS) systems.
How can I check the status of my ABS light?
It is advised that you take your car to a qualified Meineke technician who can accurately diagnose and fix the issue if you feel your ABS system isn’t functioning correctly or if the ABS light on your dashboard is lighted.
If you drive with your ABS light on, what happens?
If the ABS light came on while you were driving, your anti-lock system isn’t functioning properly. Your brakes will still function, but if you slam on them unexpectedly, the ABS may not activate, which could result in you losing control of the car.
Can low tire pressure turn on the ABS light?
Yes, low tire pressure can cause your ABS light to turn on, to give you the quick answer. When braking, the ABS (anti-lock-braking) system is in charge of keeping the wheels on the ground.
This indicates that one of your tires could not be properly inflated. This may also cause the ABS light to illuminate for a number of reasons. Wheel speed sensors are installed in your automobile at each of the four wheels. These sensors track wheel speed and continuously provide this data to the ABS and traction control systems, which are managed by the vehicle’s ECU.
When the ECU detects an anomalous speed under certain circumstances, it activates the traction control or ABS as necessary to adequately and safely control the vehicle. These sensors may occasionally malfunction or stop operating altogether, delivering the ECU erroneous indications. You might encounter the symptoms you’ve mentioned when this happens.
These erroneous or imprecise signals may unintentionally activate the traction control or ABS systems. The change in tire pressure may have also resulted in the ABS light turning on, depending on the signal sent from the wheel speed sensors to the ABS system.
Can a low brake fluid condition turn on the ABS light?
The ABS system in your car may be alerting you to abnormally low brake fluid levels as one of the causes of the ABS light being on. If your brake fluid level is low, you’ll be able to tell by the way your car brakes. It could feel soft or spongy when braking. However, you’ll likely see more than just the ABS light if the brake fluid is low.
Will turning off the battery turn off the ABS light?
Will the ABS light be reset if the battery is disconnected? Yes, the ABS light will reset if the car battery is disconnected for a long enough period of time.