Always put on the proper footwear when operating a car. inappropriate shoes
(ski boots, high heels, etc.) could make it difficult for you to utilize the brake or accelerator.
1. Keep the smart key with you or leave it in the car.
2. Ensure that the parking brake is set securely.
3. Automatic Transmission – Set the gear selector lever to P. (Park). Activate the
4. Depress the button to start/stop the engine.
5. After the vehicle hasn’t been washed or in exceptionally cold weather (below -18degC / 0degF).
operated for many days without touching the accelerator, allowing the engine to warm up.
- Though the vehicle is far from you, even if the smart key is inside of it,
- If any, with the engine start/stop button in the ACC position or above
with an LCD screen. Additionally, the chime will sound for five seconds if all doors are shut.
the park position (P) on the shift lever. If the traffic and weather cooperate,
While the car is still moving, you can place the shift lever in the N (Neutral) position.
Attempt to restart the engine while in motion by pressing the engine start/stop button.
- If the smart key is malfunctioning or the battery is poor,
- You cannot start the engine normally if the stop lamp fuse is blown.
Switch out the fuse with a fresh one. You can start the engine if it isn’t possible.
In This Article...
The Santa Fe Remote Start: How to Operate It
- Once on the lock button
- Headlights will flash, and a confirmation beep will sound.
- To hold, press the “hold” button on the key fob’s bottom.
- You can proceed now that the automobile is turned on.
After locking the door, you should hold the remote start button for 4 seconds. It only works if the button is held down for at least 2 seconds.
Once your Hyundai is started, the previously selected settings for the heating and cooling systems will operate. If no additional action is taken after 10 minutes, the car will turn off once more. The automobile will turn off if you hit the remote start button once more.
If your Hyundai has Bluelink technology, which enables your car to communicate with a smartphone, you can start your Hyundai right away from your phone. In fact, you may set the temperature to your preference and turn on features like the defroster. Three years of free maintenance are included with Bluelink-equipped Hyundai automobiles. You can manage features like locking and unlocking your doors, on-demand notifications, diagnostics, and even a remote auto locator tool for those busy days of shopping or following a performance.
For a variety of factors, remote starting is all about convenience. Everything from changing the cabin’s temperature to jump-starting your engine to just alerting the other passengers that it’s time to leave may be done using remote start. The ability to start a car without leaving the house or skip the grocery store checkout line are typically the first things that come to mind, although different people value different kinds of convenience. There are various advantages of Santa Fe remote starts to take into account:
The CoPilot app isn’t just for purchasing a car; it can also be used to keep track of recalls and receive recommendations on which regular maintenance activities are most crucial.
using the key fob to start the car
Keep holding down the Hold button. Hold it for at least three seconds, everyone.
Since you must lock your car before using remote start, don’t forget to unlock it.
Your Santa Fe will run for up to 10 minutes unless you have set a different time restriction. If you haven’t engaged a driving gear by then, the engine will shut down on its own. The last settings for the climate control are automatically remembered and set, so those arctic commutes are a thing of the past.
bman84
By pressing the engine start/stop button with the smart key, you can start the engine even if the battery is low or the smart key isn’t functioning properly. The engine start/stop button should be directly in contact with the side that has the lock button. The smart key should make a correct angle contact with the button when you directly push the engine start/stop button with it.
You cannot start the engine normally if the stop lamp fuse is blown. Switch out the fuse with a fresh one. If that’s not possible, you can start the engine by holding down the engine start/stop button while it’s in the ACC position for 10 seconds. It is possible to start the engine without applying the brakes. But always depress the brake before starting the engine to ensure your safety.
How do I use my key to remotely start my Hyundai?
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
How does a Hyundai Santa Fe 2020 start?
You must push and hold the “Hold” button at the key fob’s bottom after pressing the lock button. It will take a few seconds of holding down the “Hold” button before the car starts. Whoa, what the
How do I start a dead key fob 2019 Hyundai Tucson?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
How is a Hyundai Santa Fe turned off?
Press “OFF” to stop the engine (START/RUN position) or the power of the vehicle (ON position).
the gear lever in the P (Park) position and press the engine start/stop button. When
without the shifter in the P (Park) position, you hit the engine start/stop button,
By depressing the engine start/stop button, you can turn the engine off and into the ACC position.
without pushing the brake pedal, you can restart the engine while the vehicle
putting the gear lever in the N (Neutral) position and pressing the engine start/stop button.
When the switch is in the OFF position, press the engine start/stop button without pressing anything.
the brake lever. All of the electrical accessories work. When the engine starts or stops
button is automatically turned off if it has been in the ACC position for longer than an hour.
While it is in the ACC position, press the engine start/stop button without depressing any other buttons.
long periods of time with the engine start/stop button in the ON position. Battery could
When the shift lever is in the P (Park) or N (Neutral) position, press the button. In your
The engine won’t start and the vehicle’s automated transaxle’s engine start/stop
Changing the button as follows:
- When the car is moving, never use the engine start/stop button.
- Make sure the shifter is in the “up” position before getting out of the driver’s seat.
Put the car in park, fully apply the parking brake, and turn off the engine. Unexpected
- Never touch the start/stop button for the engine or any other controls through
- Avoid placing any moving objects near the driver’s seat since they could
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.