Regardless of whether the doors are already locked, press the lock button on your key fob.
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
In This Article...
Stepping inside the car
Getting the door open is the primary issue we first run into. Fortunately, you can use a mechanical key to unlock the door. Here are the procedures for using a mechanical key from your smart key fob to open the doors of your Hyundai Elantra:
- You must first press the button on the smart key fob’s backside.
- Pull the mechanical key carefully out of the smart key fob while depressing the eject button.
- The mechanical key should be inserted into the hole at the bottom end of the driver-side door handle after the door has been opened.
- Carefully remove the door handle’s plate covering.
- The keyhole is now visible directly through the door handle after the plate has been removed.
- To unlock your door, insert the mechanical key into the keyhole and turn it clockwise.
MiguelF
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
AdvisorGuy
If your car is equipped with the Hyundai remote starter system (which has two tiny black fobs with a single silver button) and your factory fobs have been configured to function with it, you only need to press the lock button once and the panic/alarm button once to start the vehicle. It works well for me.
Hyundai Forum is a place where all Hyundai Owners can gather to discuss and learn everything there is to know about Hyundai vehicles, including the Sonata, Elantra, and even the brand-new Kona!
How do I start my Hyundai key fob remotely?
By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
How can I start my Hyundai Sonata remotely with the key fob?
You are in for a treat if your Hyundai Sonata has a remote start. However, you must understand how to use it in order to make use of this functionality. The procedures are outlined below!
Follow these instructions to remotely start your Hyundai Sonata:
- Begin by using the Bluelink app or fob to lock the doors [even if the doors are already secured].
- Hold down the remote start button after that.
- Before the car starts, the headlights and turn signals will flash.
- After operating for 10 minutes, the Hyundai Sonata will shut off.
- Press the remote start button once more to stop the car.
No matter the weather, having a remote start is a useful feature. We’ll look more closely at how and when to use the remote start option in your Hyundai Sonata in this post. Continue reading for answers to more frequently asked questions about the Sonata’s remote start.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How do I use a key fob to start my car?
You can start your car remotely from up to 300 feet away using the available feature. Your key fob transmitter, which has a wide operational range, contains a Remote Start button (2X).
In order to remotely start your car:
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds.
- The vehicle will start after two flashes from the external lights.
- Some automobiles have a light on the remote that will indicate whether or not the car has started.
- If the system cannot start, the horn will sound until silent start is turned on. In order to minimize noise, quiet start operates the blower fan at a lesser speed. It has an on/off switch in the information display.
- During the remote start, the power windows won’t operate, and the radio won’t immediately start.
- Depending on the setting, the vehicle will operate for 5, 10, or 15 minutes while the parking lamps stay on.
Notes:
- When your car is outside and well-ventilated, only utilize remote starting.
- Through the information display, you can switch the Remote Start system on or off.
- For information on any limitations on Remote Start systems, check your local and state legislation.
How can you use a key to start a Hyundai without a key?
Hyundai Digital Key, which enables the Sonata to be unlocked, locked, started, and driven with a smartphone, is a new feature that will debut on the 2020 Sonata. The technology also enables the main user to grant three additional users access to the Digital Key. A “shared key” can truly be sent to a recipient from a great distance away.
Holding your smartphone up to the driver or passenger door handle unlocks the car using Hyundai Digital Key. Simply put the phone in the wireless charger once inside, hit the starter, and drive away. Hyundai Digital Key uses Near Field Communication (NFC) technology for security, which, unlike Bluetooth, necessitates that the smartphone and scanner be a few centimeters apart in order to operate the vehicle. When you are nearby your automobile, nobody else can simply open the doors and start the engine because of the close proximity.
There is no Hyundai Digital Key for iPhones, however it is compatible with the majority of Android phones. The Hyundai Digital Key system may be configured using the free Digital Key App, which can be downloaded from the Google Play Store. Although you can lock and start your car without the app open, it also has Bluetooth-enabled features that let you do other things like engage other features when the app is open.
Hyundai Digital Key eliminates the need for the Sonata’s two smart keys, which still come with the vehicle and allow for passive entry and keyless start. Additionally, you’ll get an NFC Key Card that you can keep in your wallet and use as a backup phone for iPhone users, for valet services, while you leave the Sonata for maintenance, or if your Android phone runs out of battery.
Hyundai Digital Key, the most recent development in car and smartphone connection, makes its debut on the 2020 Sonata and will likely be a feature on upcoming models that Hyundai introduces or redesigns.
Can you use the key to start a Hyundai?
Using your Android smartphone and the Hyundai Digital Key system, you may unlock and start your car. This article will walk you through the setup and usage of the Digital Key system if your Hyundai has it.
The following are the requirements for setting up a Hyundai Digital Key:
- a smartphone running Android. The Digital Key system is currently only compatible with Android phones. The phone needs to fulfill the following criteria:
- Android 7.0 or later operating system
- 4.0 or later for Bluetooth
- Near-Field Interaction (NFC)
NOTE: The utilization of Digital Key capabilities will be restricted if the device only supports NFC or BLE.
You have signed up for the Hyundai Digital Key service and have a MyHyundai account. The link between your phone and the Vehicle Identification Number of your automobile is formed through MyHyundai (VIN). Make sure your new Hyundai is listed in the car list if you are presently a MyHyundai member and it is equipped with a Digital Key.
Install the Hyundai Digital Key app on your phone after downloading it from Google Play.
with the aforementioned factors covered. The first step is to launch the Digital Key app and follow the on-screen instructions to enter the necessary data. The 4-digit PIN for your MyHyundai account will also be used by the Digital Key app.
Hyundai vehicles can be operated without a key fob.
Once the engine is going, the automobile will still work without the key fob. Additionally, switching from park to drive is trouble-free even when the key is not available.
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
Why doesn’t my automobile recognize my key fob?
Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.