Regardless of whether the doors are already locked, press the lock button on your key fob.
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
In This Article...
Utilizing an Android phone to start the Hyundai Elantra
With Hyundai’s Digital Key technology, you may remotely start the engine and unlock the doors using your smartphone. It makes use of the Hyundai Digital Key smartphone app. However, only certain Android devices can access this. With NFC, this feature is possible. The steps to making your own special Digital Key are listed below.
- From the Apple Store or Google Play Store, download the Hyundai Digital Key app.
- Launch the Hyundai Digital Key app, adhere to the on-screen prompts, and register for an account.
- Open your MyHyundai Account and log in.
- Make sure your smart key fob is nearby once you are inside the car.
- Start the car’s engine.
- Choose your Hyundai Elantra on the Digital Key app.
- Turn on the saving mode after choosing your vehicle.
- Place your smartphone on the wireless charging pad with the screen facing up.
- Press the menu button on the steering wheel to access the menu in vehicles without a navigation system.
MiguelF
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
connecting and registering your phone with the Digital Key system in your vehicle
Your automobile needs to be programmed to recognize your smartphone as the main key. As long as you keep your phone, you should only need to do this once.
- Open the Digital Key app on your smartphone while inside your car.
- Start your car.
- In order to activate pairing mode on the primary phone, press the + button on the app.
- Your phone should be placed on the wireless switcher.
- There will be automated pairing.
You can now register your phone as the primary digital key for the vehicle after the automobile recognizes the pairing.
On vehicles with a navigation system, proceed as follows:
How do you use the Hyundai Elantra key to start a car?
Press the lock button on your key fob while holding down the remote start button to activate the remote start function for your Hyundai Elantra. Alternatively, utilize the Blue Link Remote Package and your smartphone. When your parking lights flash, you’re all good to go! A
Sometimes getting into your car is about the last thing you want to do, whether it is 115 degrees and sunny or 15 degrees and snowy. Thankfully, technology has saved the day! You may start your Hyundai remotely in advance and start your commute without risking burning your hands or freezing your buns thanks to this feature. A
How can you use a key to start a Hyundai without a key?
Hyundai Digital Key, which enables the Sonata to be unlocked, locked, started, and driven with a smartphone, is a new feature that will debut on the 2020 Sonata. The technology also enables the main user to grant three additional users access to the Digital Key. A “shared key” can truly be sent to a recipient from a great distance away.
Holding your smartphone up to the driver or passenger door handle unlocks the car using Hyundai Digital Key. Simply put the phone in the wireless charger once inside, hit the starter, and drive away. Hyundai Digital Key uses Near Field Communication (NFC) technology for security, which, unlike Bluetooth, necessitates that the smartphone and scanner be a few centimeters apart in order to operate the vehicle. When you are nearby your automobile, nobody else can simply open the doors and start the engine because of the close proximity.
There is no Hyundai Digital Key for iPhones, however it is compatible with the majority of Android phones. The Hyundai Digital Key system may be configured using the free Digital Key App, which can be downloaded from the Google Play Store. Although you can lock and start your car without the app open, it also has Bluetooth-enabled features that let you do other things like engage other features when the app is open.
Hyundai Digital Key eliminates the need for the Sonata’s two smart keys, which still come with the vehicle and allow for passive entry and keyless start. Additionally, you’ll get an NFC Key Card that you can keep in your wallet and use as a backup phone for iPhone users, for valet services, while you leave the Sonata for maintenance, or if your Android phone runs out of battery.
Hyundai Digital Key, the most recent development in car and smartphone connection, makes its debut on the 2020 Sonata and will likely be a feature on upcoming models that Hyundai introduces or redesigns.
How can you use a dead key fob to start a 2018 Elantra?
It’s time to start the engine and leave now that you’re in the driver’s seat, right? You still need to take a few further steps before you can start the engine. Using a dead smart key fob, follow these instructions to start your car:
- Continually press the brake pedal.
- Start by gradually applying the brakes.
- Press the “Start Engine” button with the smart key fob itself.
- Your engine ought to be firing right now.
This technique works because the smart key fob has an internal chip that runs without batteries. It’s a cool function because it allows you to start the Hyundai Elantra’s engine even if your smart key fob is dead.
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
How can you use a dead key fob to unlock a Hyundai?
To remove the mechanical key, pull the key ring while pressing and holding the release button on the remote control’s rear, close to the top. To unlock the driver’s door, use the key.
Hyundai vehicles can be operated without a key fob.
Once the engine is going, the automobile will still work without the key fob. Additionally, switching from park to drive is trouble-free even when the key is not available.
How is a car key turned in?
Once you hear the starter motor spinning, turn the key clockwise. When this occurs, it will be obvious because the engine will begin to make noise and the vehicle will begin to tremble. The sound the engine is generating will often sharpen and smooth out after a short period of time. Release your grip on the key at this point to stop the starter motor. Repeat the procedure in case the engine stalls. If not, your efforts were successful.
NOTE: In some more recent vehicles, all you need to do is click a button after inserting the key into the ignition. If so, proceed as directed.
Additionally, the vehicle may have a dead battery or be out of gas if it won’t start or the starter motor doesn’t move at all. If none of these situations apply, a mechanic could be needed for your vehicle.
Can Elantras be started remotely?
The Elantra from 2021 does it have remote start? No and yes. In contrast to its larger sibling, the Sonata, the 2021 Hyundai Elantra lacks remote start on any of the three trim levels of the key fob. Instead, using their Blue Link app, Hyundai provides remote start, climate control, and much more.
How is a push-button automobile reset?
- Take hold of all of your car’s remote starters.
- Place your ignition key in and select Accessory (or press the start button once without pushing the brake pedal).
- Your remote car starter’s Lock button should be pressed.
- After turning it on for five seconds, turn the key back to the “off” position (or press the start button again).
- The on-off cycle should be repeated a total of four times.
- You’ll hear a sound (a “ding,” “ping,” or “buzz”) on cycle number four when you choose the Accessory position. Right now, programming mode is active.
- Lock the remote by holding down the button (s).
- Turn off the car in ten seconds.
- Shut the door, exit the vehicle, and then try the remote.
- If so, that’s excellent!
- It’s time to call the dealership if it doesn’t.
What occurs if you leave the key in the ignition of a push-start vehicle?
Will a keyless ignition-equipped vehicle eventually shut off on its own if I walk away with the key?
1. Mr A:
No, it won’t. The only problem is that the car won’t start when you turn it back on.
I once tried that with a Lexus GX470 and a SClass.
2. Mr. B: the doors won’t even lock, the alarm won’t go off. Very well happened to me
3. Mr C:
Depending on the vehicle. If I am outside of my car’s range for about 10 minutes, it will switch off (albeit not completely; more like it will go into hibernation mode), and it will turn back on when I approach.
4. Mr D:
5. Mr E:
6. Mr F:
once tried (on my 013 highlander)… Except for the constant flashing of that tiny light, nothing ever happened. As long as I kept the engine running, I probably could have continued to drive until I ran out of fuel (or whatever).
7. Mr G:
8. Mr H:
I’ve traveled more than 50 miles in a push-button-start vehicle without the use of a key. When I went to turn the car back on after turning it off, I realized the key was nowhere to be found. Before I could go home, I had to wait for my driver to bring the key to me from the house. This could, in my opinion, vary by car type.
9. Mr. I: If you enjoy waka, go to Kaduna. Only the smart key out of range alarm will be displayed.
10. Mr J:
My alarm would ring as soon as you got out of the car, and once the key was out of reach, it would show “no key” on the screen. If you tried to relocate it, it wouldn’t budge an inch and wouldn’t sound either. The No key signal will keep flashing.
11. Mr K:
It won’t; the only time it would say “key not detected” is when you switch off the engine. Everything will be alright as long as the engine is running, so feel free to throw the key away. Just make sure to keep the engine running.