Always put on the proper footwear when operating a car. inappropriate shoes
(ski boots, high heels, etc.) could make it difficult for you to utilize the brake or accelerator.
1. Keep the smart key with you or leave it in the car.
2. Ensure that the parking brake is set securely.
3. Automatic Transmission – Set the gear selector lever to P. (Park). Activate the
4. Depress the button to start/stop the engine.
5. After the vehicle hasn’t been washed or in exceptionally cold weather (below -18degC / 0degF).
operated for many days without touching the accelerator, allowing the engine to warm up.
- Though the vehicle is far from you, even if the smart key is inside of it,
- If any, with the engine start/stop button in the ACC position or above
with an LCD screen. Additionally, the chime will sound for five seconds if all doors are shut.
the park position (P) on the shift lever. If the traffic and weather cooperate,
While the car is still moving, you can place the shift lever in the N (Neutral) position.
Attempt to restart the engine while in motion by pressing the engine start/stop button.
- If the smart key is malfunctioning or the battery is poor,
- You cannot start the engine normally if the stop lamp fuse is blown.
Switch out the fuse with a fresh one. You can start the engine if it isn’t possible.
In This Article...
The Santa Fe Remote Start: How to Operate It
- Once on the lock button
- Headlights will flash, and a confirmation beep will sound.
- To hold, press the “hold” button on the key fob’s bottom.
- You can proceed now that the automobile is turned on.
After locking the door, you should hold the remote start button for 4 seconds. It only works if the button is held down for at least 2 seconds.
Once your Hyundai is started, the previously selected settings for the heating and cooling systems will operate. If no additional action is taken after 10 minutes, the car will turn off once more. The automobile will turn off if you hit the remote start button once more.
If your Hyundai has Bluelink technology, which enables your car to communicate with a smartphone, you can start your Hyundai right away from your phone. In fact, you may set the temperature to your preference and turn on features like the defroster. Three years of free maintenance are included with Bluelink-equipped Hyundai automobiles. You can manage features like locking and unlocking your doors, on-demand notifications, diagnostics, and even a remote auto locator tool for those busy days of shopping or following a performance.
For a variety of factors, remote starting is all about convenience. Everything from changing the cabin’s temperature to jump-starting your engine to just alerting the other passengers that it’s time to leave may be done using remote start. The ability to start a car without leaving the house or skip the grocery store checkout line are typically the first things that come to mind, although different people value different kinds of convenience. There are various advantages of Santa Fe remote starts to take into account:
The CoPilot app isn’t just for purchasing a car; it can also be used to keep track of recalls and receive recommendations on which regular maintenance activities are most crucial.
using the key fob to start the car
Keep holding down the Hold button. Hold it for at least three seconds, everyone.
Since you must lock your car before using remote start, don’t forget to unlock it.
Your Santa Fe will run for up to 10 minutes unless you have set a different time restriction. If you haven’t engaged a driving gear by then, the engine will shut down on its own. The last settings for the climate control are automatically remembered and set, so those arctic commutes are a thing of the past.
Common causes of this include:
Bad starter: Starter motors can deteriorate and begin to malfunction over time. If this is the issue, a new starter needs to be installed. The starter is not the issue if the car starts. The starter may be at fault if the ignition is turned on but nothing happens, or if the engine turns over very slowly and the dash lights dim while the engine is cranking.
Poor Relay Wire: The starter motor may not operate if the starter motor’s starter motor wiring is loose or damaged. It will be necessary to replace or fix the wiring.
Dead or low battery: The starter motor requires electricity from the battery to function. The starter motor may not run if the battery is weak or failing to supply adequate electricity. This issue should be fixed by charging the battery or replacing it.
The battery terminals may also be loose or have developed corrosion. It is advised to clean and tighten the cables and terminals.
Failure of the Solenoid: The starter system frequently experiences problems with the solenoid, which makes it challenging to start the car. To identify whether the beginning motor or solenoid is the issue, the starter must be examined. The malfunctioning solenoid must be replaced.
Ignition Switch Failure: One of the most typical signs of an ignition switch failure is that the car is difficult to start. If the ignition switch is warm to the touch, there may be a problem with the wiring for the ignition switch. A malfunctioning ignition switch will eventually cease to function entirely and will require replacement.
Fuel pump defect: If the engine is not receiving enough fuel, starting will be challenging, if not impossible. When the fuel pump does not provide enough fuel, the automobile will start slowly and eventually not at all. The fuel pump is in charge of transferring fuel from the tank to the injectors.
Spark plugs, which produce the spark that enables a vehicle to burn fuel, are fouled. One of the most frequent causes of a hard starting engine is fouled plugs. The voltage needed to leap the gap and ignite the fuel rises as the electrodes deteriorate. This may result in the engine taking longer to start.
Clogged Fuel Filter: A clogged fuel filter might make it exceedingly challenging to start a vehicle. The fuel filter, which removes impurities, might clog up over time. This will make it difficult to start the car since the injectors won’t receive enough fuel.
Fuel that has been contaminated by too much alcohol or water will make it difficult or impossible to start an automobile. Even if it does start, tainted fuel can cause the engine significant harm. Immediately get the vehicle inspected if fuel contamination is suspected.
You may remotely start your car from almost anywhere with remote start.
How does a 2020 Hyundai Santa Fe start?
Press the lock button once, then hold the aHolda button for three seconds to activate the remote start on your 2020 Hyundai Santa Fe. Before starting your car, check sure it is properly vented to prevent carbon monoxide buildup.
One of the most hated activities on a chilly winter morning is getting into a frigid car to commute to work. Fortunately, there are two little phrases that can save you from this icy fate: remote beginning A
Can you use a key to start a Hyundai Santa Fe?
Vehicles that also have keyless entry typically come with a remote start feature as well. Without having to get inside the car, remote starting enables drivers to warm up or cool down the interior before driving. If the Hyundai Santa Fe has this feature, we have spoken with automotive professionals. Here is what they gave us.
The key FOB can be used to enable the Hyundai Santa Fe’s remote start capability. The following steps will enable the remote start on your car:
- Get your key FOB ready.
- Activate the lock button.
- the “Hold” button while holding it down.
- Press the unlock button to get into your car.
You can start your car remotely from a distance of up to 500 feet by using this feature. Since you may warm the interior and defrost the windshield before driving, this option is excellent, especially in colder climates. Continue reading the article below for more details about the Hyundai Santa Fe.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How does a Hyundai auto start?
By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
How is a Hyundai Santa Fe turned off?
Press “OFF” to stop the engine (START/RUN position) or the power of the vehicle (ON position).
the gear lever in the P (Park) position and press the engine start/stop button. When
without the shifter in the P (Park) position, you hit the engine start/stop button,
By depressing the engine start/stop button, you can turn the engine off and into the ACC position.
without pushing the brake pedal, you can restart the engine while the vehicle
putting the gear lever in the N (Neutral) position and pressing the engine start/stop button.
When the switch is in the OFF position, press the engine start/stop button without pressing anything.
the brake lever. All of the electrical accessories work. When the engine starts or stops
button is automatically turned off if it has been in the ACC position for longer than an hour.
While it is in the ACC position, press the engine start/stop button without depressing any other buttons.
long periods of time with the engine start/stop button in the ON position. Battery could
When the shift lever is in the P (Park) or N (Neutral) position, press the button. In your
The engine won’t start and the vehicle’s automated transaxle’s engine start/stop
Changing the button as follows:
- When the car is moving, never use the engine start/stop button.
- Make sure the shifter is in the “up” position before getting out of the driver’s seat.
Put the car in park, fully apply the parking brake, and turn off the engine. Unexpected
- Never touch the start/stop button for the engine or any other controls through
- Avoid placing any moving objects near the driver’s seat since they could