How To Setup Android Auto Hyundai?

It’s also quite easy to set up your wifi Android Auto(tm) connection.

How to configure Android Auto wirelessly

  • Turn on Bluetooth and WiFi on your Android device.
  • On your Tucson’s infotainment system, click the SETUP button.
  • A device connection is selected.
  • Tap the tab for Phone Projection.
  • Select Add New from the menu.
  • Choose the name of your car from the Bluetooth discovery list on your Android phone, which is typically “Tucson”. Typically found under Settings > Connections > Bluetooth, the discovery list can vary based on the make and type of your device.
  • Your phone will display a pop-up Bluetooth pairing request with a pin code. Press Pair in your car and Pair on your phone after making sure the code matches the one shown on the infotainment screen of your Tucson (for safety reasons).
  • If you want to access your phone’s messages using Android Auto in Tucson, tap Yes on the Message access request prompt on your phone.
  • Accept the terms and conditions of Android Auto on your car.
  • You might be asked to grant the Android Auto software on your phone specific rights, such as control over phone calls and SMS messaging. Grant all necessary authorizations.
  • The infotainment screen will first display the words “Connecting to Android Auto,” after which Android Auto will start. On the home screen, tap the Android Auto icon if it doesn’t start up automatically.

using a USB link to run Android Auto (if wired connectivity is supported)

Through Android Auto, you can link your Android smartphone to your vehicle and use the system’s screen to control your smartphone apps. Check the following before utilizing Android Auto:

Get the Android Auto app from Google Play and install it. You cannot install the app if your location does not support Android Auto.

Begin Android Auto by doing the actions listed below:

  • Press All menus>Settings>Device connection>Android Auto>Enable Android Auto from the Home screen.
  • Using the cable that came with your smartphone, connect it to the USB port in your car.
  • If this is your first time connecting your smartphone for phone projection, read the message on the notification pop-up window before selecting Next>OK.

Never quickly connect and disconnect a USB connector multiple times. This could result in a system malfunction or a device problem.

  • Unlock your smartphone if it’s locked, then accept using phone projection.
  • The Android Auto menu is activated on the All menus screen after the smartphone is correctly recognized (if equipped).
  • Press All menus>Android Auto or Phone projection from the Home screen.
  • Use the calling and messaging features of your smartphone on your system.
  • To launch an application or carry out a function, tap an icon on the screen.
  • To activate Google speech recognition, use the Voice recognition button on the steering wheel.
  • Music playback may not immediately switch to your system even if you start phone projection while music is currently playing in your smartphone’s music player. Open the music player on the phone projection screen, start playing, or press and hold the Media button while choosing an appropriate phone projection function from the media selection window to play music through the system.
  • The navigation and the radio/media function of your smartphone’s navigation system will both emit sounds through the speakers in your car when you use phone projection. The navigation volume is adjusted first when you adjust the level when both noises are playing.
  • Remove the USB cable from your system to stop Android Auto.
  • You cannot alter the phone projection settings while it is in use. Remove the USB cable from your system and make the desired changes.
  • The symbols on Android Auto’s main screen may alter based on Google’s restrictions.
  • Update your smartphone’s operating system to the most recent version if you want to use phone projection in optimized situations.
  • The identification time may change depending on the hardware, firmware, and operating system versions of the connected device.
  • Charges for mobile communication may apply while using phone projection.
  • Some features might not operate as intended depending on the network signal condition.
  • When using phone projection, avoid operating your phone.
  • The following features are not available while using Android Auto:
  • mode USB
  • searches through the steering wheel remote or control panel
  • iOS CarPlay

Add Apple CarPlay and Android Auto to Your Hyundai

Hyundai has always been a pioneer in the automobile industry. In light of this, it comes as no surprise that Hyundai was among the first car companies to provide Android Auto and Apple CarPlay in various models beginning in 2015. There are now a handful of new Hyundai models that are compatible with Android Auto and CarPlay, and more are constantly being introduced.

Android Auto was introduced to the Hyundai lineup with the 2015 Hyundai Sonata. Currently, some 2016 Hyundai Elantra GT, 2016 Tucson, 2016 Genesis, 2017 Santa Fe, and 2017 Santa Fe Sport models, among others, have Android Auto and Apple CarPlay options. (A complete list of CarPlay and Android Auto models may be found here.)

How can I connect my Hyundai to Android Auto?

Setting Up Your Phone Your Android should first be connected to the front in-dash USB port. Additionally, you need to enable Bluetooth on your phone and select Accept to grant Android AutoTM rights. Your phone is now connected.

Does Hyundai support Android Auto?

It’s also quite easy to set up your wireless Android AutoTM connection. Activate the Hyundai’s Android AutoTM feature. After that, unlock the phone’s screen and attach it to a USB cord. You must use a USB cord to install Android AutoTM for the first time on your wireless car display.

What Hyundai models support Android Auto?

As part of a brief software update, Hyundai this week added Android Auto compatibility to the bulk of its lineup, joining Apple CarPlay.

For current Hyundai cars that are compatible with Apple CarPlay, a free 15-minute software update is available.

Although not all variations of each model are included, the i30, Elantra, Veloster, Tucson, and Santa Fe are models that are eligible for the upgrade. Below is a list of all compatible variations.

The Sonata midsize sedan, when the current version was introduced in 2015, was the first production car in the world to integrate Android Auto, making the Korean manufacturer one of the early users of the Google smartphone mirroring technology.

However, local versions of the Sonata and a number of other model variants, including the Elite, Premium, Highlander, and similar grades, are not compatible with CarPlay or Android Auto.

Hyundai Australia has confirmed with CarAdvice that this is because a local decision was made to upgrade Elite and Premium models to include in-built satellite navigation when factory support for that feature in Australian models had not been secured. This was made prior to the launch of CarPlay and Android Auto.

Although future facelifts are the most likely timeframe, it is unclear at this time when these high-specification varieties will become compatible with the Apple and Android platforms.

How can I get Android installed on my Hyundai?

There are two ways for drivers to install these devices in their cars. For starters, the Fort Mill Hyundai staff may assist with installation. Otherwise, downloading and installing the software at home is simple. All you need is an Internet-connected computer, a USB stick with at least 2GB of free space, and enough time.

You can install the program on your Hyundai vehicle after downloading it and copying it to the USB device. The engine of the car must be running during installation, which might take up to an hour. Therefore, it is advised that you park your vehicle for installation in a place that is well-ventilated and shaded.

The USB disk should be plugged into the car’s USB port. then select the SETUP button on the radio. Select the SYSTEM INFO icon by descending the touchscreen display of the car. Afterward, select the UPDATE button located at the bottom of the screen. The installation procedure will begin as a result.

In my automobile, how do I install Android Auto?

Obtain the Android Auto app from Google Play, or connect a USB cable to the vehicle and download it when instructed. Make sure your automobile is in park before turning it on. Lock the screen of your phone, then use a USB cable to connect. Give Android Auto access to the functions and applications on your phone.

Why is my car’s Android Auto not functioning?

Your best option is to erase all the saved data in the Android Auto app and retry if Android Auto still won’t operate. Make sure your car is turned off and the USB cable unplugged before you proceed. You should do this while your phone is not linked to your vehicle.

Go to Settings > Apps & notifications > See all X apps > Android Auto > Storage & cache to erase the data for Android Auto. Notably, the menu in Android 12 is called Apps rather than Apps & notifications.

Choose Clear cache first, then try using Android Auto once more from this menu. Your Android Auto preferences won’t be lost if you clear the cache because doing so just gets rid of temporary files that are used to improve the app’s performance.

If it doesn’t work, return to the menu and select the next option, Clear storage. It’s like installing the software from scratch because this erases all of its data. After doing this, you’ll probably need to tweak Android Auto settings once more.

Hopefully Android Auto will reconnect for you after you completely delete all of the app’s files.

How can I make Android Auto function?

Turn on your car before you connect your phone for the first time. Before you begin your drive, make sure your car is in park (P) and give yourself time to configure Android Auto.

  • Your Android phone should be connected to the USB port in your car using a USB cable.
  • Your phone could prompt you to update to the most recent version of the app or download the Android Auto app.
  • To finish setup, adhere to the directions displayed on screen.

When Android Auto is linked to the car through USB, your phone’s Bluetooth is automatically activated.

Why won’t my car and Android Auto connect?

If you’re having trouble connecting, try disconnecting and replugging the USB cable. If at all feasible, try restarting the infotainment system in your car, and then try to connect once more. If Android Auto previously functioned with your device and vehicle, the issue is probably with your cable.

Do you no longer support Android Auto?

There is no longer a smartphone app for Android Auto. The app is currently only accessible through automobile screens. The shutdown was initially disclosed in 2019.

Does the Tucson’s wifi Android Auto system exist?

The wireless Android Auto capability of the 2022 Tucson is one fantastic feature. With the help of this function, drivers and passengers using Android smart devices can access a ton of fantastic features while on the move. These features include the ability to use premium streaming services, access to dynamic navigation tools, hands-free calling and texting capabilities, and much more.

Which mobile devices work with Android Auto?

  • a smartphone running Android 11.0.
  • a Samsung or Google smartphone running Android 10.
  • Android 9.0 on a Samsung Galaxy S8, Galaxy S8+, or Note 8

Can I use Bluetooth to link Android Auto?

NETWORK WIRELESSLY Ensure that your car is parked. On the infotainment screen, click the gray ANDROID AUTO symbol. Utilizing Bluetooth, pair or link your phone with the infotainment system (r). Start by adhering to the instructions on the screen and on your phone.

Settings for Android Auto are where?

  • Log into your phone’s settings.
  • Select Connection preferences from the list of connected devices.
  • Tap Behavior, then Driving mode.
  • To open Android Auto, choose.
  • Return and tap. automatically start