- Go to Setup > Connectivity > iOS > Enable Apple CarPlay on the Hyundai infotainment system’s touchscreen.
- Utilize an Apple Lightning to USB cable to connect your Apple iPhone to your Hyundai.
- You should see a green Apple CarPlay emblem on your Hyundai’s infotainment screen.
In This Article...
Installing Android Auto and Carplay after downloading
There are two ways for drivers to install these devices in their cars. For starters, the Fort Mill Hyundai staff may assist with installation. Otherwise, downloading and installing the software at home is simple. All you need is an Internet-connected computer, a USB stick with at least 2GB of free space, and enough time.
You can install the program on your Hyundai vehicle after downloading it and copying it to the USB device. The engine of the car must be running during installation, which might take up to an hour. Therefore, it is advised that you park your vehicle for installation in a place that is well-ventilated and shaded.
The USB disk should be plugged into the car’s USB port. then select the SETUP button on the radio. Select the SYSTEM INFO icon by descending the touchscreen display of the car. Afterward, select the UPDATE button located at the bottom of the screen. The installation procedure will begin as a result.
In my Hyundai, how can I install Apple CarPlay?
- To enable Apple CarPlay, go to Setup > Connectivity > iOS on your Hyundai’s infotainment display.
- Utilize an Apple Lightning to USB cable to connect your Apple iPhone to your Hyundai.
The 2016 Hyundai Santa Fe is Apple CarPlay compatible.
As of right now, Hyundai Australia has introduced an infotainment update for a select few vehicles, bringing Apple CarPlay compatibility to variations in the i30, Tucson, and Santa Fe lines.
Apple CarPlay, which was created to essentially replace a car’s in-car entertainment system with the familiar iPhone platform, has now been released internationally in more than 100 model lines since it was first shown in March 2014.
Hyundai’s CarPlay debuted overseas with the Tucson, but now Australian purchasers and current owners of pre-configured models can also use the platform.
CarPlay is a standard feature on the Active, Active X, and SR variants of the compact i30 Series II range, as well as any already-sold vehicles constructed in the fourth quarter of 2015. Existing models can be upgraded with the new software during a 15-minute visit to a Hyundai dealership.
While current Tucson SUV owners can also contact a Hyundai dealership to have their vehicles upgraded, new Tucson SUV customers in the Active and Active X trims will also have immediate access to CarPlay.
The redesigned 2016 Santa Fe Series II, which was released locally in November, now comes standard with CarPlay, and current Series II owners may gain the same access by visiting a dealership.
All three models’ prices are unchanging. More information, opinions, and costs for each are available here: Hyundai Santa Fe, Hyundai Tucson, and Hyundai I30.
According to Hyundai Australia’s product planning manager, Andrew Tuitahi, “the beauty of Apple CarPlay is that it is powered by your iPhone, it is dynamic and linked, and it is therefore easily updated.”
“When Apple makes these systems better by adjusting performance, introducing new features, or enabling new apps, they will be instantly available in your vehicle.”
UPDATE: Hyundai Australia has verified to CarAdvice that, as of right now, higher-spec cars above the Active and Active X grades are not compatible with CarPlay.
Hyundai Australia PR manager Guido Schenken told CarAdvice that while the company hopes to enhance those systems in the future to support CarPlay, “it is not 100% assured at this moment.”
“Although it’s highly probable to occur and that’s what we want to do, we’re working on it with our suppliers. At this time, we can’t confirm the timing.”
When or if the infotainment systems in those models are eventually made CarPlay compatible, it is unknown if owners of existing Elite and Highlander vehicles will have the same dealer-visit upgrade option.
Why won’t my Hyundai’s Apple CarPlay function?
I experienced exactly the same problems as user dcwarpath. In reality, dcwarpath and I have the same model year, trim level, and package (2021 SEL with Convenience Pkg), as well as the identical iPhone XR. I constantly had to use the hard reset button since the phone frequently lost connection (to the right of the Tune knob). Although I adore the car, the frequent audio and screen cuts off were annoying.
I discovered that turning off the Wireless’s automatic request to join other wifi networks helped a little, but the issue persisted. When I later upgraded to an iPhone 12 running iOS 15.2, the issue was resolved entirely. The firmware for the Hyundai infotainment system was also not updated by me. Since I’ve had the phone for roughly three weeks, the wireless car play has never disconnected while I’m driving.
I don’t understand why it now functions with the new phone. Despite the fact that I can’t think of any reason why this would be the case, I had read that the issue might potentially arise due to inadequate cell coverage. Maybe the iPhone 12 merely received some upgrades to the BT, Wifi, or cellular radios that are now making it functional.
Check to see if CarPlay isn’t restricted if it can’t detect your iPhone. Make sure CarPlay is turned on by going to Settings > Screen Time > Content & Privacy Restrictions, tapping Allowed Apps. Navigate to Settings > General > CarPlay, choose your vehicle, and then select Forget This Car. Restart CarPlay after that.
The 2017 Hyundai Santa Fe offers wireless CarPlay compatibility.
The 2017 Hyundai Santa Fe should already have CarPlay support, however it only applies to wired CarPlay, thus it won’t show up under the Wireless CarPlay screen in Settings->General->Car Play.
You should only need to connect the iPhone to a USB port that is accessible on the Sta Fe to activate Carplay.
You must inquire at your local Hyundai dealership about a software upgrade for your vehicle’s infotainment system. Or perhaps visit the Hyundai website to see if there’s a user-installable software download option?
The 2017 Hyundai Santa Fe should already have CarPlay support, but it is just for wired CarPlay, thus it won’t show up in the Wireless CarPlay section of the Settings->General->Car Play menu.
While the screen’s graphic demonstrates how to set up Wireless CarPlay, it also illustrates wired connections.
I don’t have wireless CarPlay, yet my Honda Civic has always appeared there as “Honda” from Day One. The CarPlay icons that are shown can also be rearranged and “hidden” on this screen.
That much is true. However, it won’t show up there until you connect the iPhone to the vehicle’s media center. It would have been better to be more detailed.
Is wireless CarPlay available on the 2020 Hyundai Santa Fe?
A rear-seat reminder and a 7-inch touchscreen infotainment system are included as standard equipment with the Santa Fe. The device has Bluetooth, Apple CarPlay, and Android Auto in addition to four USB connections.
The 2017 Santa Fe has Apple CarPlay, does it not?
The 2017 Santa Fe and Santa Fe Sport are now being constructed with support for both Android Auto and CarPlay, and they will be available at dealerships soon. All other Hyundai models from 2017 that have compatible Display Audio or Navigation Systems come standard with both smartphone integration options.
How do I enable wireless Apple CarPlay?
- On your steering wheel, depress and hold the voice command button.
- Set the Bluetooth or wireless mode on your receiver.
- Get your iPhone’s Settings app open.
- Visit General.
- Click CarPlay.
- then click Turn Bluetooth On.
Be aware that depending on the make and type of your vehicle, these steps can change. Please refer to your owner’s handbook for further details.
Do you like CarPlay? Do you currently use Apple CarPlay or Android Auto? If you have any other questions, kindly let us know.
Although his primary topics are Apple and consumer technology, he has previously written about local politics, public safety, and education for a number of publications.
In the media industry, he has had a variety of positions, including writer, editor, and news designer.
How can I make Apple CarPlay work?
- Connect your smartphone to the USB port in your car and check for the CarPlay icon.
- After selecting “Settings,” select “General” and “CarPlay.” Select your car from the list of “Available Cars.”
How can my iPhone be connected to my Hyundai Santa Fe?
When you’re out and about, Bluetooth makes it simple and safe to stay connected to the contacts, applications, and music on your mobile device. You must understand how to connect your smartphone to the multimedia system in your Hyundai before you can begin using Bluetooth.
A general, step-by-step tutorial for pairing your phone can be found below. Please visit Hyundai Bluetooth connecting instructions for instructions unique to your vehicle and device.
1. Click the Setup button, which is next to the LCD display controls.
2. Click the Bluetooth icon in the Settings Menu.
3. Choose Bluetooth Connection from the Bluetooth menu.
4. Choose Create New.
5. Ensure that your device has Bluetooth enabled.
6. Open the Bluetooth screen on your device, then choose the device name that corresponds to the one that is shown.
7. A Passkey can be needed on your phone. Put the number into your phone if asked.
8. The car will certify that the connection between your device and the vehicle was successful.
9. The car will acknowledge that it downloaded your contacts.
10. If you want to make your phone the primary device for Auto Connection, choose Yes.
How do I get my iPhone to work with Apple CarPlay?
Lightning(r) connector from your iPhone must be used to connect to the Toyota USB port. On the Toyota EntuneTM 3.0 touchscreen, select “Apple CarPlay.” To access Apple CarPlay, select Menu > General. Apple CarPlay ought to connect instantly once your phone is linked to a USB wire.
The Santa Fe has wireless CarPlay, does it not?
Hyundai Santa Fe: Standard & Upgraded Technology Get the newest technology in your 2022 Hyundai Santa Fe, such as wireless Android AutoTM and Apple CarPlay(r) with a standard 8-inch color touchscreen, or take advantage of the high-resolution 10.25-inch touchscreen navigation that is available with Android AutoTM and Apple CarPlay (r)
Why does my plugged-in Apple CarPlay not function?
Restarting the iPhone and the infotainment system, attempting a new USB cable, and ensuring that Siri and CarPlay are enabled will most likely help if your Apple CarPlay isn’t working.
You can significantly enhance your driving experience by using Apple Carplay. Therefore, it can be a major pain in the neck if it doesn’t work. It was aggravating to cope with when my iPhone suddenly stopped connecting to my automobile. Fortunately, I was able to solve the problem, and I will now explain how I accomplished it.
Are you experiencing the same issue with Apple CarPlay not functioning? Lucky for you, I’m here to assist you.
Without a USB port, how do I use CarPlay?
Do not worry if your vehicle does not support wired CarPlay or if you do not have a USB-A to Lightning connector on hand. Without a wire, you can install CarPlay by using the voice command capabilities of your vehicle.
While the wireless or Bluetooth is turned on, press and hold the voice command button on the steering wheel.
Once it has initialized, CarPlay will keep doing so each time you start your engine.
Does Apple CarPlay require an app to operate?
CarPlay may be used without the usage of a special app. The feature is included with your iPhone as long as you own a suitable device (see below). You only need to connect your phone to a suitable car or stereo to use it.
Once connected, your stereo display will show the CarPlay logo someplace. To open CarPlay and abandon your default automobile interface, you must tap it. You are already familiar with the Apple CarPlay app because of the image below.