- Clara S July 30, 2020. Hold the reset button down until the TPMS indicator light in the instrument panel blinks slowly three times. This will reset the tire pressure sensor in the Hyundai Ioniq.
In This Article...
How do I clear the tpms on a Hyundai Ioniq?
Hold the reset button down until the TPMS indicator light in the instrument panel blinks slowly three times. This will reset the tire pressure sensor in the Hyundai Ioniq.
Tire Pressure Sensor Reset
Identify the TPMS system type.
If the direct system is used by your 2018 Hyundai IONIQ electric, resetting the tire pressure sensors might only require pressing a reset button on the dash or navigating a menu as described in your owner’s manual. If your 2018 Hyundai IONIQ electric has an indirect system, a dealer or one you have purchased yourself must reset the system using a magnet or scanning equipment. In order to reset some systems, the ignition must be turned on while the reset button is pressed and held down for three seconds within the glove box.
Pump up the tires.
Ensure that all tires are inflated appropriately. All tires must be fully inflated because you are resetting the sensors to “zero,” or else the sensors won’t be properly calibrated and their readings will be off.
Evaluate the battery.
Make sure the sensor is not being powered by a dead battery if your 2018 Hyundai IONIQ electric employs one. The battery should be changed every five years. Since the battery is integrated, in certain cases this necessitates replacing the complete sensor unit.
Make the transponders new.
Every wheel has a unique transponder. Each responder’s location changes when the wheels are rotated, and the TPMS needs to learn their new locations. Although this relearning process varies depending on the vehicle, you can get more information in the TPMS chart in your manual or online. If the valve stems double as tire pressure sensors, it is a good idea to swap them out when purchasing new tires.
Apply the magnet technique.
Press the lock and unlock buttons on the key fob when the key is in the ignition but the engine is not running. Placing a magnet over each valve stem after the initial chirp will cause the horn to chip for each valve in the following order: left front, right front, right rear, and left rear. Make that the driver information center is showing the pressure values.
Utilize the scan tool approach.
The owner’s manual’s TPMS Reprogramming Procedure menu prompts can be followed if no sensors are being replaced.
The Hyundai Ioniq’s tire pressure sensor can be removed in a variety of ways: Replace a damaged tire pressure sensor.
The best course of action is to visit your mechanic because it’s likely that your Hyundai Ioniq’s tire pressure sensor on the valve is broken or malfunctioning even after you’ve reset the tire pressure indication. Be advised that the cost of a unit is typically approximately 120 EUR. Deactivating the sensors using an opcom and your vehicle’s diagnosis is another choice that some people choose to utilize because the problem may be repeated on some series. This strategy is not advised, though, since it can result in poor handling and interfere with your Hyundai Ioniq’s typical operation. Now that you possess all the necessary information, you can easily reset the tire pressure sensor on a Hyundai Ioniq.
Visit our Hyundai Ioniq category if you need more information on the Hyundai Ioniq.
How much pressure should the hybrid Hyundai Ioniq tires be at?
Tire pressure for a Hyundai Ioniq The 2020 Hyundai Ioniq’s tire placard specifies a minimum tire pressure of 36 psi. This is equivalent to 2.5bar and 250kPa.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
How does the tire pressure sensor on a Hyundai work?
Hyundai vehicles are equipped with TPMS, or tire pressure monitoring systems, which may detect low tire pressure in any of the car’s four tires and issue an alert. According to the table below, a TPMS from one of two manufacturers is installed as a component of the valve assembly in every Hyundai vehicle.
According to the table below, a TPMS from one of two manufacturers is installed as a component of the valve assembly in every Hyundai vehicle. The tire pressure monitor ECU/receiver receives the data from the sensor, which detects the pressure and temperature inside the tire, together with the TPMS’s distinctive ID.
If the TPMS ID is stored with the ECU, the placard pressure is checked with it, and if there is a pressure difference, a warning light is illuminated on the dash-mounted display.
What should I do if my tire pressure warning light is on?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
The Hyundai Ioniq ships with what tires?
The Hybrid Limited and Hybrid SEL (225/45R17) and Plug-In Hybrid Limited (205/55R16) tires from Goodyear were used on the 2020 versions.
Can the tire pressure monitoring system be turned off?
Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.
Why won’t my tire pressure warning light turn on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
My tires are in good condition, so why is my low tire pressure sign on?
The primary danger is that one of your wheels might not have enough air in it. Normally, if one of your tires is more than 25% under-inflated, the low tire pressure indicator will on.
The wheel could explode, also known as a tire blowout, if you ignore the warning and continue driving.
You’ve probably seen the disastrous effects a blowout can have on vehicle accidents, so this is definitely not something to take lightly. Other drivers on the road are also at risk in addition to you.
For this reason, even if you are certain (or believe you are certain) that the TPMS warning light is going on when your tires are adequately filled, you should never disregard it.
After a tire rotation, does the TPMS need to be reset?
These sensors measure the air pressure and transmit the information to the dashboard of your car. The batteries can last up to 10 years, and there is no need to reset them after rotating tires or making inflation changes. They provide precise pressure readings.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
What distinguishes TPMS from low tire pressure?
A tire pressure monitoring system (TPMS) is built into your car and is intended to monitor the air pressure in each tire. The Low Tire Pressure indicator on your dash goes on automatically when the system detects a low tire. Until the tires are checked and the pressure is adjusted, this light will remain on.
On the other hand, the TPMS light is intended to turn on when there is an issue with the monitoring system itself. For instance, if a sensor in a wheel malfunctions, the TPMS light will illuminate and remain on until the issue has been resolved.
The maintenance process is not replaced by the TPMS system. Even if the indicator is not on, you should physically check your tire pressure at least once every month.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Will the TPMS light turn on if my tires are over-inflated?
You most likely have a Tire Pressure Monitoring System (TPMS) installed if you drive a more recent vehicle. Your tires’ internal electrical TPMS system keeps track of their air pressure. The TPMS turns on a dashboard warning light if your tires are either under- or over-inflated. You need to have your tire pressure checked if the light is steady. You should have your TPMS examined if the light is flashing.
Visit one of our stores for a free tire pressure check if you notice the TPMS light. If you’re on the road, fill up your tires with air as soon as you can at a petrol station. unsure how much more to say? For further information, see How to Check Tire Air Pressure.
Don’t panic if the TPMS light illuminates or flashes after you install the spare if you need to change a tire. Nothing to worry about there; that’s merely the system’s way of letting you know it can’t locate a TPMS unit in the spare tire.
Accurate tire pressure is now possible thanks to TPMS. It automatically alerts you when the pressure is low, keeping you safer, preventing damage to your tires, and increasing your MPG.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.