How To Reset Tire Pressure Light On Hyundai Santa Fe?

Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.

In This Article...

Tire Pressure Sensor Reset

Identify the TPMS system type.

If the direct system is employed by your 2019 Hyundai Santa Fe, resetting the tire pressure sensors might only require pressing a reset button on the dash or navigating a menu as described in your owner’s handbook. If your 2019 Hyundai Santa Fe has an indirect system, it must be reset by a dealer or one you have personally purchased using a magnet or scanning equipment. In order to reset some systems, the ignition must be turned on while the reset button is pressed and held down for three seconds within the glove box.

Pump up the tires.

Ensure that all tires are inflated appropriately. All tires must be fully inflated because you are resetting the sensors to “zero,” or else the sensors won’t be properly calibrated and their readings will be off.

Evaluate the battery.

If the sensor in your 2019 Hyundai Santa Fe is powered by a battery, make sure it is not dead. The battery should be changed every five years. Since the battery is integrated, in certain cases this necessitates replacing the complete sensor unit.

Make the transponders new.

Every wheel has a unique transponder. Each responder’s location changes when the wheels are rotated, and the TPMS needs to learn their new locations. Although this relearning process varies depending on the vehicle, you can get more information in the TPMS chart in your manual or online. If the valve stems double as tire pressure sensors, it is a good idea to swap them out when purchasing new tires.

Apply the magnet technique.

Press the lock and unlock buttons on the key fob when the key is in the ignition but the engine is not running. Placing a magnet over each valve stem after the initial chirp will cause the horn to chip for each valve in the following order: left front, right front, right rear, and left rear. Make that the driver information center is showing the pressure values.

Utilize the scan tool approach.

The owner’s manual’s TPMS Reprogramming Procedure menu prompts can be followed if no sensors are being replaced.

On a 2021 Hyundai Santa Fe, how do you reset the tire pressure indicator?

On a Santa Fe 2022, how do you reset the tire pressure light?

Drive the vehicle for around 10 minutes at 50 mph.
Turn the ignition key to the “On” position without starting the automobile.
After three seconds, or when the light has flashed three times, let go of the TPMS reset button.
To reset and calibrate the sensor, start the engine and let the vehicle run for 20 minutes.

The reset button for the tire pressure monitor is often located under the steering wheel on Hyundai Santa Fe vehicles.

You could also wonder why the tyre pressure indicator is still on after the tires have been inflated. If your tire pressure monitoring system is malfunctioning or there is a persistent leak, the air pressure warning light may continue to glow even after you have inflated your tires.

Use a pressure gauge to confirm that the tire is properly inflated to the recommended air pressure if the TPMS warning light comes on again after you’ve inflated it.

On a 2022 Tucson, how do you reset the tire pressure light?

Put the car in park.
Start the engine.
Until the Settings menu shows on the screen, continually press the Mode button on the steering wheel.
To scroll to the Tire Pressure screen, press the downarrow key.
Each tire’s pressure should be checked.
The screen will display the low-pressure tire.

Why does my tire pressure light come on in Hyundai when my tires are fine?

Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.

The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.

If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.

How can the TPMS on a 2010 Hyundai Santa Fe be reset?

When the tire pressure light blinks three times, release pressure on the TPMS reset button. For the sensors to reset, start the car and let it run for 20 minutes. The button to reset the tire pressure monitor is under the steering wheel.

My tire pressure is fine, so why won’t the light go off?

If your tires are properly inflated yet the warning light continues to illuminate, you may have a leak or a TPMS issue in one or more of your tires. To determine if a tire has a leak is not difficult. Simply double-check the air pressure in each of your tires with your tire gauge. If all of the tires have the proper air pressure, one or more tire pressure sensors are likely to be at fault, necessitating repair work on your tire pressure monitoring system. You’ll need to replace or repair the tire if you notice that one or more of your tires’ air pressures have fallen.

When the tire pressure light is on, can I drive?

You should be able to find our store or an air pump if the light just came on and you need to get there. However, it is unsafe to keep driving while the light is on. This is why: When you drive your car with low tire pressure, you accelerate the premature and severe tire wear.

How long does the tire pressure light remain illuminated?

The air will frequently warm up and expand after 20 minutes of driving, restoring the proper pressure in your tires. After 20 minutes of driving, if the light is still on, you should add air to your tires as necessary to restore the proper pressure. Whatever the source, low tire pressure is dangerous for your car.

Why is the light on my tire still on?

When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.

*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.

Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?

Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.

What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?

The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.

Will the tire pressure light automatically turn off?

Tire pressure can be impacted by overnight temperature variations or by cold winter days. The low-pressure indicator may then display as a result of this. The pressure in your tires can change by up to 10 PSI when there are significant temperature changes between day and night.

After about 20 minutes of driving, the light may turn off on its own when the right inflation level stabilizes and the air in your tires warms and expands.

In any case, you ought to have your air checked immediately. Your tires are at least 25% underinflated, according to the TPMS light. This poses a risk to your safety, especially if the load is close to your vehicle’s maximum load capacity. There is a higher possibility of tire failure, degraded handling, and increased tire wear and tear. Your fuel economy may also suffer.

Can the tire pressure monitoring system be turned off?

Yes, it is possible to disable your tire pressure monitoring device using a smart, non-intrusive approach. You only need to use an emulator created to get around the TPMS. The TPMS bypass emulator is a tiny box-shaped gadget containing technology that allows you to “switch off” your tire pressure monitoring system.

Why do my car’s tires still have low pressure?

Don’t ignore the tire-pressure warning light if it turns on; you might be getting a flat. A tire’s tendency to lose around a pound of air pressure every month and a pound for every 10 degrees of temperature drop can cause low pressure, as can leaks.

How can I turn off the low pressure indicator?

Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.

What is the Hyundai Santa Fe’s TPMS?

Hyundai vehicles are equipped with TPMS, or tire pressure monitoring systems, which may detect low tire pressure in any of the car’s four tires and issue an alert. According to the table below, a TPMS from one of two manufacturers is installed as a component of the valve assembly in every Hyundai vehicle.

According to the table below, a TPMS from one of two manufacturers is installed as a component of the valve assembly in every Hyundai vehicle. The tire pressure monitor ECU/receiver receives the data from the sensor, which detects the pressure and temperature inside the tire, together with the TPMS’s distinctive ID.

If the TPMS ID is stored with the ECU, the placard pressure is checked with it, and if there is a pressure difference, a warning light is illuminated on the dash-mounted display.

Should the TPMS be reset after purchasing new tires?

After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.

What distinguishes TPMS from low tire pressure?

A tire pressure monitoring system (TPMS) is built into your car and is intended to monitor the air pressure in each tire. The Low Tire Pressure indicator on your dash goes on automatically when the system detects a low tire. Until the tires are checked and the pressure is adjusted, this light will remain on.

On the other hand, the TPMS light is intended to turn on when there is an issue with the monitoring system itself. For instance, if a sensor in a wheel malfunctions, the TPMS light will illuminate and remain on until the issue has been resolved.

The maintenance process is not replaced by the TPMS system. Even if the indicator is not on, you should physically check your tire pressure at least once every month.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our