- the SERVICE REQUIRED is visible while. When it doesn’t automatically reset to the new SERVICE INTERVAL SCHEDULE, press and hold the SELECT/RESET button.
In This Article...
How can I reset the oil life on a 2019 Hyundai Santa Fe?
Step inside your 2019 Hyundai Santa Fe and lock the doors in order to reset the oil life. Switch to park and start your Santa Fe’s engine. Now click the Mode button to access the Service Required notice. Hold onto the Select/Reset button until the Service Interval Schedule appears again. Now that your oil life has been completely reset, you should be good to go. Restart the ignition and check to see whether the light is off to confirm that it was reset.
How can the oil light on a 2013 Hyundai Elantra be reset?
Hyundai advises having the Elantra serviced once a year or after 7,500 miles. A “Service Required” sign or wrench light will be displayed on the dashboard to alert you, among other things, to the need for an oil change.
- Launch the car.
- For five seconds, press and hold the “OK” or “RESET” button (depending on the model).
- Press and hold the “OK” button for one second, then let go. The oil change indicator will then turn back on.
All there is to it is that! Now is the time to reset the oil change notice. If following these instructions didn’t help, try again.
How can the oil light on a 2013 Hyundai Azera be reset?
- Activate the engine.
- Utilize the controls on the steering wheel’s lower right.
- The MAINTENANCE menu will appear once you hold down the DISP button for two seconds.
- Select ENGINE OIL with the UP/DOWN arrows, and then choose DISP with the button.
- As necessary, adjust the service interval.
- To leave the menu, adhere to the instructions.
- To validate that the message or light has been reset, turn off the ignition and then start the vehicle.
How can the oil light on a 2015 Hyundai Tucson be reset?
In your 2015 Hyundai Tucson, turn the ignition key to the “on” position and gently press the gas pedal three times to reset the oil life warning or maintenance light. Release the clutch and restart your car; the oil light should now be reset.
What does the Hyundai Santa Fe’s oil light mean?
When the engine oil pressure is low, this warning light will come on to let the driver know. If this light comes on, stop in a safe location right away, and turn off the engine.
How can the maintenance light be turned off on a 2011 Hyundai Sonata?
- Lock all doors, shift into park, and then fire up the engine.
- Select SETUP from the menu.
- Click VEHICLE.
- Click CLUSTER.
- just click SERVICE INTERVAL.
- Press the RESET button.
- turn off the ignition
On a 2019 Hyundai Santa Fe, how do you reset the low tire pressure indicator?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
Where is the Hyundai Santa Fe’s TPMS reset button located in 2018?
Start the engine and give the sensor 20 minutes to refresh. Under the steering wheel is typically where you’ll find the TPMS reset button.
Exactly how do I stop the oil change?
Holding down the reset button, turn the ignition back to the ON position. Keep a close eye on the maintenance or oil change light. It ought to begin to flicker. Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.