Step inside your 2019 Hyundai Santa Fe and lock the doors in order to reset the oil life. Switch to park and start your Santa Fe’s engine. Now click the Mode button to access the Service Required notice. Hold onto the Select/Reset button until the Service Interval Schedule appears again. Now that your oil life has been completely reset, you should be good to go. Restart the ignition and check to see whether the light is off to confirm that it was reset.
In This Article...
Resetting the indicator oil light servicing Samsung Santa Fe
How to reset the service light and maintenance light on a Hyundai Santa Fe for model years 2013, 2014, and 2015. Use the button on the dashboard of the automobile to manually reset the maintenance light.
- Start the car.
- The display will read “Service required” if a service is overdue. Press the SELECT/RESET button (left pointing arrow) at the bottom right of the steering wheel for more than one second to clear this message.
- The service interval will be restored to its original value.
- The user must enter the SERVICE INTERVAL menu to enable and configure the service interval feature. To highlight the INFORMATION menu, press the MODE button (rectangle icons) on the bottom right of the steering wheel.
- To enter the menu, press the SELECT/RESET button. Then, to activate the SERVICE INTERVAL mode and select the appropriate interval, press the DOWN arrow.
- To make sure the indication has been reset, turn off the ignition and then start the vehicle.
How often should an oil change be performed on a 2019 Hyundai Santa Fe?
For traditional oil, Hyundai advises having your 2019 Hyundai Santa Fe’s oil and filter replaced every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
What type of oil should a 2019 Hyundai Santa Fe use?
The 2019 Santa Fe uses components and fluids that are widely accessible, just like the majority of other consumer-grade vehicles. Pick up a quart of 5W-20 or 5W-30 oil the next time you’re at the auto parts store; these are the recommended builds for the Santa Fe and two of the most widely accessible. Knowing that you’re getting the best performance possible is made much easier by this!
How can my oil life be reset?
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can I reset my upcoming oil change?
Turn the Key while Holding the Reset Button. Holding down the reset button, turn the ignition back to the ON position. Keep a close eye on the maintenance or oil change light. It ought to begin to flicker. Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.
What occurs if the oil life is not reset?
Your car’s engine could sustain major damage if you don’t have your oil changed on a regular basis, which could end up costing you a lot of money. Your engine won’t operate properly if your oil is black and soiled. One of the main signs that your oil needs to be changed is this.
How can I turn my oil change light back on?
Get behind the wheel of a pre-2005 GM vehicle, shut the door, turn the ignition to the auxiliary power position, wait for the lights to come on, then quickly depress the accelerator three times within five seconds after turning the key. When the counter has been reset, the oil light should flash.
Use this process on a GM model from 2006 or later, however keep in mind that some cars have slightly different button locations to hit to reset.
Turn the key to the auxiliary power position while sitting behind the wheel and with all the doors closed. After finding the oil life message by scrolling through the options on the Driver Information Center (DIC), press and hold the enter key for one second before letting go. There will be a reset notice on the DIC.
Is full synthetic oil recommended by Hyundai?
While conventional oil only lasts between 3,000 and 5,000 miles before it needs to be replenished, synthetic oil can last up to 10,000 miles before it needs to be changed. We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.
What is the indicator for oil life?
On your dashboard, you’ll notice “Oil Life” and a percentage. This handy and significant component of your Honda’s maintenance reminder system is the Oil Life Indicator. Your percentage is 100% when the engine oil is new. As you drive your Honda more miles, it gradually decreases. Accordingly, your oil still has 40% of its useful life left before it needs to be replenished. Your oil still has 15% of its lifetime left at 15%, and so forth.
Oil Life Percentage and Oil Pressure Indicator are two distinct concepts. When the engine is operating, the red oil pressure indicator—which resembles a red leaky oil can—should never turn on. If it begins to flash, it means that the oil pressure briefly fell very low before rising. The engine has lost oil pressure and catastrophic engine damage is probable if the oil pressure indicator remains illuminated while the engine is operating. In either scenario, you must act right now.
Why does that matter? The quality of your engine’s oil is measured by the oil life percentage on your dashboard. You might not need to add oil to the engine because it is NOT a sign of oil level. The oil life % is one more element of a system called a maintenance reminder designed to help Honda owners save time and money.
Your percentage starts/resets at 100% with new engine oil. After that, your Honda will measure the lubricating capacity of your motor oil by automatically tracking engine operating circumstances.
A yellow wrench icon will light up on your dashboard when the oil life indicator on your Honda reads 15%, letting you know that maintenance is necessary soon. When your automobile appears with an oil life percentage of 15% or less, the yellow wrench does not necessarily indicate it is unsafe to drive; rather, it should serve as a reminder that your Honda needs regular maintenance soon. The percentage will gradually decrease as you drive more and put more miles on your Honda.
What ought I to do? Your Honda is now required for service when the maintenance reminder system deems that the oil life has reached 5%. Right now, without an appointment, we advise a quick and convenient trip through Scott Honda’s Express Service Lane. In order to determine which services your Honda requires, our technicians will read the maintenance reminder codes from your car.
Your car’s engine needs service after the oil life reaches 0%. Driving with deteriorated oil increases the risk of your Honda’s engine failing or suffering serious damage.
Your oil life will deteriorate more quickly than usual at lower RPMs under specific driving circumstances (hot temperatures, short journeys, frequent starts and stops, and mountainous terrain).
Last but not least, even if Honda’s maintenance minder does not detect the oil level in your car, it is still a good idea to check your dipstick and consult the owner’s handbook to determine the proper oil level.
You can find a list of maintenance reminder codes in your Honda’s owner’s manual.
How does the monitor for oil life function?
Work of Oil Life Monitors. Simple oil life monitors merely keep track of your driving distance against a factory-programmed mileage interval. The device simply notifies you when you need another oil change in the driver’s information display as long as the oil level and temperature stay where they should.
How long beyond the due date can you skip changing the oil?
In general, cars may travel 5,000 to 7,500 miles without having an oil change. Additionally, you can go 10,000 or even 15,000 miles between oil changes if your car uses synthetic oil. To schedule your oil change right here on our website, skip the following paragraphs if you want to learn more about oil changes.
Why does my car keep telling me to replace the oil when I recently did?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
Bring it in to see us at Craig Dunn Motor City if your oil light is still on after an oil change, or make an appointment for service right away online! Similarly, we can change the oil on your car if it needs it. Do you have any more inquiries? Please feel free to contact our staff right away!
Why is my oil light still on after I changed my oil?
Let’s move on to the car’s second oil light, the oil pressure light. When this light turns on, it indicates that the engine’s oil pressure has fallen, and you need to act right away. The engine of your car can suffer severe harm if you keep the light on while driving.
The light signifies that something is interfering with the engine’s ability to receive a continuous flow of oil from the oil pump to lubricate its components when it is operating normally. You can consider oil to be the vital component of your car’s engine. Your engine is protected from heat and friction with the right oil level. But without it, your engine can sustain damage quickly. Therefore, it’s crucial to routinely check your oil and filter. You must deal with it if the light comes on. Here is what to do.
- Turn off your engine and first pull your car securely to the side of the road.
- Next, locate the engine compartment of your car (often by lifting the hood) and check the oil level.
- To do this, take out the dipstick, clean it with a rag, then put it back in the engine and pull it out again to check the level. The oil level is low if it is below the “full” line. (If you are having difficulties locating the dipstick, refer to your owner manual.)
- If the dipstick does really show low oil, look for any indications that your car is leaking. A failing gasket or seal may be the cause of oil dripping. If there isn’t an obvious outward oil leak, the engine may have an interior issue.
Purchase the appropriate oil for your vehicle’s kind and weight, then refuel the engine until the dipstick reads “full.” If the light remains on even after you restart your car, get a professional opinion by calling for a tow truck.