Hyundai advises having the Elantra serviced once a year or after 7,500 miles. A “Service Required” sign or wrench light will be displayed on the dashboard to alert you, among other things, to the need for an oil change.
- Launch the car.
- For five seconds, press and hold the “OK” or “RESET” button (depending on the model).
- Press and hold the “OK” button for one second, then let go. The oil change indicator will then turn back on.
All there is to it is that! Now is the time to reset the oil change notice. If following these instructions didn’t help, try again.
In This Article...
concerning Hyundai Elantra
Since 1990, the South Korean automaker Hyundai has been manufacturing the Hyundai Elantra, also known as the Hyundai Avante. In Australia and other European markets, the Elantra was initially sold as the Lantra. This occurred in Australia as a result of the Mitsubishi Magna Elante model with the same name; similarly, the name was changed in Europe to prevent confusion with the Lotus Elan. In 2001, the name “Elantra” became established around the world (except in South Korea).
Featuring a six-speed automatic transmission, the 2019 Elantra 2.0. The 2.0 engine will be mated to the continuously variable automatic transmission (CVT) found in the 2019 Kia Forte for the 2020 model year. As a result, the 2020 Elantra SE will be able to equal the Forte FE’s highway fuel efficiency rating of 41 miles per U.S. gallon. The EPA highway test will grade higher 2.0 variants, which have more weight and different tires, at 40 mpg. The 2020 Elantra SE has a city rating of 31 mpg while higher trims have a rating of 30 mpg, according to the U.S. fueleconomy.gov website.
In the United States, but not in Canada, the 2019 Elantra sedan was available with the 1.4 Turbo and 1.6 Turbo engines.
The Hyundai Elantra was too similar to the Elante trim level, which was last seen on the 1991 Magna, according to Mitsubishi Motors Australia. The Elantra name is too similar to the Lotus Elan and its Kia equivalent, according to the British Lotus and the South Korean Kia. Elan and Elante production ended in 2001, but the Avante still needed to be renamed because Audi controlled the Avant name in Europe. The chassis codes for the 1996–2000 and the 1999–2000 model years are also a source of contention. According to Hyundai, the codename for the 1996–1998 Elantra is RD and not J2, while the codename for the 1999–2000 Elantra is RD2 and not J3. (source:wiki)
How can the oil life on a 2015 Hyundai Tucson be reset?
In your 2015 Hyundai Tucson, turn the ignition key to the “on” position and gently press the gas pedal three times to reset the oil life warning or maintenance light. Release the clutch and restart your car; the oil light should now be reset.
How is the oil level checked in a 2015 Hyundai Sonata?
- Remove Dipstick – Find the oil dipstick, take it out, and clean it.
- Reinstall the dipstick, take it out, and then check the oil level.
- Additional information regarding the oil level
How do I check my dashboard’s oil?
- Make sure your automobile is parked level and that the engine is off.
- Open the hood of your car.
- To find the oil dipstick, look.
- Check your dashboard for an electronic oil monitor if you drive a modern car without a dipstick.
- Remove the dipstick.
How frequently should your oil be changed?
While it used to be customary to change the oil every 3,000 miles, modern lubricants now allow for suggested oil change intervals of 5,000 to 7,500 miles in the majority of engines. Additionally, your car’s engine may last up to 15,000 miles between maintenance if it needs complete synthetic motor oil.
How long should you let pass before checking your oil?
Make sure your automobile is parked on a level surface; a slope could result in an erroneous oil reading. Your engine ought to be chilled. If you’ve just drove your automobile, wait five to ten minutes before checking the oil level, or do it right away before using the vehicle.
What causes the oil light to flash?
heating of the engine The likelihood is that the oil in your automobile is failing to lubricate the moving parts in the engine as a result of overheating if your oil warning light is illuminated or flashing and your engine is audibly clicking.
Should I check my oil on a hot or cold engine?
Engine Oil: Verify! Make sure the vehicle is parked level and, in the case of most cars, that the engine is cold before checking the oil to prevent burning yourself on a hot engine component.
Service in off: What does that mean?
It determines and shows when you require scheduled maintenance (based on mileage).
In the event that there are 900 miles (1,500 km) or 30 days left, respectively, “Service
in “Each time you set the ignition switch, a message is shown for a while.
If you don’t service your car in accordance with the already entered service schedule
Resetting the service interval to the previously entered mileage and days will result in:
The distance and days may be off if any of the following circumstances take place.