You must turn the 2013 Hyundai Sonata on, but do not start the engine, in order to do an oil reset. Locate and hold the reset button on the console’s dash. Turn off the vehicle and wait five minutes after the light blinks and stops. You’ve just reset your oil.
In This Article...
Technology Resources from RS
To reset the 2013 Hyundai service interval, heed these setup/reset instructions:
2. The display will read “Service required” if a service is overdue.
3. The service interval will be set back to its initial value.
4. To confirm the, switch off the ignition and start the
Testimonial: “Thank you for the thorough directions; as other commenters have noted, the 2013 Hyundai lacks an oil reset light. I like to use synthetic oil and change the oil every 3,000 miles, which is probably overkill, but $65 oil changes are considerably less expensive than buying a new engine. lol”
The oil reset maintenance light system for Hyundai Sonata models from the years 2013, 2014, and 2015 can also be reset as follows:
- Start the car.
- The display will read “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message.
- The service interval will be restored to its original value.
- The user must access the INFORMATION menu to enable and configure the service interval feature.
- To highlight the INFORMATION menu, press the MODE button (rectangle icons) on the top right of the steering wheel.
- In order to enter the menu and activate the SERVICE INTERVAL mode and set the appropriate interval, press the OK button.
- To make sure the indication has been reset, turn off the ignition and then start the vehicle.
Resetting the oil life/service light on a 2015–2019 Hyundai Sonata
You will therefore receive the service reminder once you start your car. It indicates that the mile is negative, thus that is how much longer it was between services. Therefore, all you have to do to reset it is:
Activate the key
Switching your ignition to the on position will be the first thing we need to accomplish.
Access the WRENCH tab or exclamation point menu.
The cluster display will be the next thing we pay attention to, and we’ll need the button, the directional switch to scroll up and down, and the OK button. So, by pressing the button until it falls on it, you can access the wrench tab or exclamation point menu.
- the Service minder location
- Hold the OK button pressed.
When it happens, push and hold the OK button, and your oil maintenance light will be effectively reset.
What does it mean to reset the maintenance reminder system?
Nearly all current vehicle instrument clusters display a maintenance reminder indicator when a service is due.
The criterion used by each manufacturer to decide whether the indicator illuminates is a little bit different. The distance traveled, the number of hours the engine has ran, and the operational environment are examples of common criteria.
Typically, the maintenance reminder is reset by pressing a button or by performing a series of actions, including depressing the pedal while turning the ignition. Some cars have a straightforward button on the fuse access panel. In some cars, you can change the settings so that you can take additional elements, such the quality of the oil, into account.
One or more of the following factors could cause the reminder to turn on too soon or not at all: a broken speedometer or dash input, a bad dash bulb, or an incorrectly programmed setting.
The system will keep alerting you every 3,000 miles until the setting has been altered, for instance, if you use oil that is rated for 5,000 miles but the setting on your car is set to 3,000 miles. The maintenance reminder might also be accidentally reset by a professional, in which case the light would come on 1,000 miles after the oil change. This could happen if the car is configured to require a service every 4,000 miles and you receive an oil change at 3,000 miles. The reminder system would be erroneous in these circumstances.
How often should an oil change be performed on a 2013 Hyundai Sonata?
One of the most fundamental and important maintenance for your car is an oil change. For traditional oil, Hyundai advises changing your 2013 Hyundai Sonata’s oil and filter every 3,000 to 5,000 miles. Usually, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How frequently should I replace the oil in a Hyundai Sonata?
How often should I have my Hyundai Sonata’s oil changed? Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Hyundai advises changing your Hyundai Sonata’s oil and filter every 3,000 to 5,000 miles. One of the most essential and crucial procedures for your car is an oil change.
A 2013 Hyundai Sonata uses how much oil?
We must first discuss the oil capacity of your 2013 Hyundai Sonata before moving on to the topic of how to replace your car’s oil. With a 4.9-quart oil volume, your 2013 Hyundai Sonata requires this much oil for each oil change. A
Keep in mind that your engine’s displacement, which refers to the 2.4-liter volume its cylinders occupy, should not be confused with this measurement. Never switch these dimensions since they are non-interchangeable. A
How can the oil light on a 2013 Hyundai Elantra be reset?
Hyundai advises having the Elantra serviced once a year or after 7,500 miles. A “Service Required” sign or wrench light will be displayed on the dashboard to alert you, among other things, to the need for an oil change.
- Launch the car.
- For five seconds, press and hold the “OK” or “RESET” button (depending on the model).
- Press and hold the “OK” button for one second, then let go. The oil change indicator will then turn back on.
All there is to it is that! Now is the time to reset the oil change notice. If following these instructions didn’t help, try again.
How much oil does a Hyundai Sonata require?
If you’ve never owned a Hyundai Sonata before, you might need to be aware of the recommended maintenance schedule. What kind of oil, for instance, should you use in your car? You’re in luck since we’ve done a ton of research and have all the solutions below.
The recommended oil for a Hyundai Sonata is 5w-20 or 5w-30. When obtaining an oil change, you can select to use synthetic or conventional products, so keep that in mind. Every 3,500 to 5,000 miles for conventional oil changes and every 7,500 to 10,000 miles for synthetic blends.
The health of your car’s engine depends on the oil you use. This post will go over why it’s crucial to use the Sonata’s recommended oil types from Hyundai. Continue reading to find out the answers to more frequently asked questions about Hyundai Sonata oil changes.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How can the oil light on a 2013 Hyundai Azera be reset?
- Activate the engine.
- Utilize the controls on the steering wheel’s lower right.
- The MAINTENANCE menu will appear once you hold down the DISP button for two seconds.
- Select ENGINE OIL with the UP/DOWN arrows, and then choose DISP with the button.
- As necessary, adjust the service interval.
- To leave the menu, adhere to the instructions.
- To validate that the message or light has been reset, turn off the ignition and then start the vehicle.
Exactly how do I stop the oil change?
Holding down the reset button, turn the ignition back to the ON position. Keep a close eye on the maintenance or oil change light. It ought to begin to flicker. Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.
Does Hyundai advise using synthetic motor oil?
While conventional oil only lasts between 3,000 and 5,000 miles before it needs to be replenished, synthetic oil can last up to 10,000 miles before it needs to be changed. We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.
How do I check my dashboard’s oil?
- Make sure your automobile is parked level and that the engine is off.
- Open the hood of your car.
- To find the oil dipstick, look.
- Check your dashboard for an electronic oil monitor if you drive a modern car without a dipstick.
- Remove the dipstick.
How long should you let pass before checking your oil?
Make sure your automobile is parked on a level surface; a slope could result in an erroneous oil reading. Your engine ought to be chilled. If you’ve just drove your automobile, wait five to ten minutes before checking the oil level, or do it right away before using the vehicle.
The oil change light: what does it mean?
Let’s move on to the car’s second oil light, the oil pressure light. When this light turns on, it indicates that the engine’s oil pressure has fallen, and you need to act right away. The engine of your car can suffer severe harm if you keep the light on while driving.
The light signifies that something is interfering with the engine’s ability to receive a continuous flow of oil from the oil pump to lubricate its components when it is operating normally. You can consider oil to be the vital component of your car’s engine. Your engine is protected from heat and friction with the right oil level. But without it, your engine can sustain damage quickly. Therefore, it’s crucial to routinely check your oil and filter. You must deal with it if the light comes on. Here is what to do.
- Turn off your engine and first pull your car securely to the side of the road.
- Next, locate the engine compartment of your car (often by lifting the hood) and check the oil level.
- To do this, take out the dipstick, clean it with a rag, then put it back in the engine and pull it out again to check the level. The oil level is low if it is below the “full” line. (If you are having difficulties locating the dipstick, refer to your owner manual.)
- If the dipstick does really show low oil, look for any indications that your car is leaking. A failing gasket or seal may be the cause of oil dripping. If there isn’t an obvious outward oil leak, the engine may have an interior issue.
Purchase the appropriate oil for your vehicle’s kind and weight, then refuel the engine until the dipstick reads “full.” If the light remains on even after you restart your car, get a professional opinion by calling for a tow truck.