Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
In This Article...
Low tire pressure reset
On the Hyundai Tucson, there is no option to restore low tire pressure. Drive your car for 5–10 miles if you notice the warning symbol and all of your tires are inflated to the required levels. You will need to go to your local Hyundai dealership to have all the sensors professionally inspected if the warning light is still on.
The warning light on some Kia vehicles shuts off when the air pressure is topped off, despite the fact that this is not advised. If the suggested air pressure for your car is 32, for instance, try filling it up to 35 and then driving for a few miles. Remember that increased air pressure may reduce driving comfort and result in uneven tire wear.
The individual tire pressures won’t be visible on the cluster LCD display if the TPMS isn’t working properly.
- After a brief drive, check the tire pressure monitoring system display in the instrument cluster to frequently check your tire pressure, such as once a week.
- Please be aware that, especially if your car isn’t used frequently, tires might naturally lose one to two PSI per month.
- Also keep in mind that tire pressures can change with temperature, so it’s best to check them right as you start your car up.
- Verify that your tires are properly inflated in accordance with the information placard on the driver’s side door jam of your car.
to restart The tire must be inflated to at least 35 psi. For more than a week, I attempted this with 32. Go above 35, a friend said. Drive it; I turned it off, but when I turned it back on, it was broken. The answer is 35.
After inflation, how do you turn the light off? I keep asking that, but all I get are these useless answers!
How should I respond if the tire pressure sign illuminates?
The Hyundai Tucson is a fantastic vehicle, and if there is a problem with the tires, you will get a warning sign on your LED screen.
The graphic will clearly show you the problem the automobile has identified as well as which tires require attention.
Once the tire pressure has been adjusted to the proper PSI (this information can be found on the door placard or in your user manual.) You might observe that the sensors’ recalibration can take some time.
You might want to calibrate the tire pressure monitoring device by following the straightforward instructions below if you believe the light should have turned off but hasn’t:
- Take a long drive while maintaining a constant speed of 50 mph; this will reset the pressure system and turn off the light.
Check out these more suggestions to try if this one doesn’t work:
- The TPMS reset button may need to be identified; it is typically found under the steering wheel. Check your user manual for its location if you can’t find it.
- Once you’ve found it, turn on the ignition of the automobile, but do not start the engine. When the button blinks three times, let go of it.
- The sensor may need to refresh for 20 minutes or so before you may start the car.
Other pointers for resetting the TPMS light are as follows:
- All tires, including the spare, should be steadily inflated to slightly over the recommended PSI. Then totally deflate each tire. Once this has been accomplished, properly PSI-inflate the tires.
- It may be necessary to unhook the battery cable from the sensor, start the vehicle, and honk the horn for a few seconds in order to deplete the sensor’s power. This will release any remaining power in the car.
- When you’re done, re-connect the battery, and the TPMS should be fixed.
Visit a Hyundai dealership so that they may conduct a thorough sensor health check if you’ve noticed that the light is still on.
How do I reset the TPMs on a 2018 Hyundai Tucson?
Tire pressure is monitored via wheel sensors in the 2018 Hyundai Tucson. Park the car somewhere flat, and use a gauge to make sure the tires are inflated to a PSI of about 35 to reset the TPMS warning light. Turn the key in the ignition to the “on” position without starting the car with the doors locked and the windows down. When the TPMS reset light blinks three times, press the button underneath the steering wheel. Remove the key and turn off the ignition. As the system registers the new pressure in each tire, turn on the engine and let it run for 20 minutes. Other techniques include 10 minutes of 50 mph driving or cutting and re-connecting battery cables.
Make sure the tire pressure is right before starting the 2018 Hyundai Tucson to reset the TPMs. After 10 minutes, press the reset button, which is located to the right of the steering wheel. You might need to keep pressing the button until the light flashes in some circumstances. Incorrect tire pressure and poor performance are both possible if the sensor is not functioning properly.
On a 2022 Tucson, how do you reset the tire pressure light?
- Put the car in park.
- Start the engine.
- Until the Settings menu shows on the screen, continually press the Mode button on the steering wheel.
- To scroll to the Tire Pressure screen, press the downarrow key.
- Each tire’s pressure should be checked.
- The screen will display the low-pressure tire.
How can I turn off the low tire pressure indicator?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
What should you do if your tire pressure warning light illuminates?
Find the nearest gas station or service station if your TPMS warning light does illuminate, and check the pressure in all four tires (plus the spare, if necessary). If necessary, add air to any tires that are underinflated to the range specified on a sticker inside the driver’s door.
What should the pressure be in a Hyundai tire?
The pressure on your Hyundai tires will change depending on the year, manufacture, and model. Most tire pressure levels lie between 32 and 35 PSI on average, although the recommended pressure can be found in your vehicle’s owner manual or on the tire itself.
My tires are in good condition, so why is my low tire pressure sign on?
The primary danger is that one of your wheels might not have enough air in it. Normally, if one of your tires is more than 25% under-inflated, the low tire pressure indicator will on.
The wheel could explode, also known as a tire blowout, if you ignore the warning and continue driving.
You’ve probably seen the disastrous effects a blowout can have on vehicle accidents, so this is definitely not something to take lightly. Other drivers on the road are also at risk in addition to you.
For this reason, even if you are certain (or believe you are certain) that the TPMS warning light is going on when your tires are adequately filled, you should never disregard it.
How are tire pressures checked?
- Remove the cap covering the tire’s air valve, and store it safely away.
- For a few seconds, firmly press the tire gauge against the exposed valve stem.
- Check the air pressure display.
- Compare this value to the tire pressure that is advised.
- Change the air valve cap on the tire.
My tire pressure is fine, so why won’t the light go off?
How to Reset the Tire Pressure Light Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
Why do my car’s tires, which are good, state they have low tire pressure?
While the tires appear to be in good condition and the low tire pressure light is ON, you can:
- simply press a button to reset the machine and observe the results; or
- The sensors need to be changed since one or more of them are damaged.
After starting the vehicle, the low tire pressure warning light ought to turn on for a few seconds. The light ought to be turned off right away.
Drive your car, preferably to the closest gas station or tire shop, to check the air pressure in each tire if the low tire pressure warning light is still on.
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
But if the low tire pressure warning light is still on and all the tires are adequately inflated and warmed up, move on to the next step.
Take this opportunity to get out the owner’s manual. The TPMS reset button may be found on the console or in the glove box, depending on the make and model of your car.
Here are the steps to take after finding the TPMS reset button:
- Don’t start the engine after turning the key to the ON position.
- For at least three seconds, press and hold the TPMS reset button before letting go. The system will switch off the warning light and produce a beep or other audible alert.
- To finish the reset process, start the engine and drive the vehicle for 30 to 1 hour at a minimum speed of 19 mph.
- It’s time to check or replace the TPMs sensors if the warning light comes back on.
- To get the system tested, drive to the nearest tire store or dealership.
If your car has TPMS, avoid making it a practice of resetting it every time the low tire pressure warning light comes on.
Your safety is considered during the system’s design. The pace of technological advancement means that the TPMS sensors get better with each new model. However, you should make it a practice to check the tire pressure each time you get in the car in order to get the most out of what you have.
Use a different method than the TPMS to check the tire pressure. A quick visual check is sufficient to establish the existence of a flat.
Here’s a helpful hint: just in case, always have a tiny tire pressure gauge in the glove box. You may check the real tire pressure with this straightforward gadget before the TPMS activates.
Take your vehicle to the shop so they can “re-learn” the sensor with a specific tool if your TPMS light is still on. These tools are available online, but they are not inexpensive. I would advise researching the Autel TS501.