Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
In This Article...
How Do You Reset A Hyundai Elantra’s TPMS?
You may reset the tire-pressure monitoring system in your Hyundai Elantra once you’ve found the TPMS.
The following steps will show you how to reset the TPMS on a Hyundai Elantra:
1. Turn the ignition to the “ON” position and insert the key.
2. Avoid starting the car.
3. Hold down the TPMS reset button while waiting for the tire pressure light to blink three times.
4. Let go of the TPMS button.
5. Start the vehicle.
6. Permit the sensor to reset for 20 minutes.
Your tire-pressure monitoring system will be reset by following these instructions. After putting air in your tires, it’s crucial to reset your TPMS since it keeps your knowledge of your tire pressure accurate. When your tires need to be inflated, the tire pressure monitoring system will let you know by turning on the tire pressure light.
Low tire pressure reset
On the Hyundai Tucson, there is no option to restore low tire pressure. Drive your car for 5–10 miles if you notice the warning symbol and all of your tires are inflated to the required levels. You will need to go to your local Hyundai dealership to have all the sensors professionally inspected if the warning light is still on.
The warning light on some Kia vehicles shuts off when the air pressure is topped off, despite the fact that this is not advised. If the suggested air pressure for your car is 32, for instance, try filling it up to 35 and then driving for a few miles. Remember that increased air pressure may reduce driving comfort and result in uneven tire wear.
The individual tire pressures won’t be visible on the cluster LCD display if the TPMS isn’t working properly.
- After a brief drive, check the tire pressure monitoring system display in the instrument cluster to frequently check your tire pressure, such as once a week.
- Please be aware that, especially if your car isn’t used frequently, tires might naturally lose one to two PSI per month.
- Also keep in mind that tire pressures can change with temperature, so it’s best to check them right as you start your car up.
- Verify that your tires are properly inflated in accordance with the information placard on the driver’s side door jam of your car.
to restart The tire must be inflated to at least 35 psi. For more than a week, I attempted this with 32. Go above 35, a friend said. Drive it; I turned it off, but when I turned it back on, it was broken. The answer is 35.
After inflation, how do you turn the light off? I keep asking that, but all I get are these useless answers!
How can the tire pressure light on a 2018 Hyundai Elantra be reset?
After resetting your TPMS, you can utilize a number of techniques to turn off your tire pressure light if it remains on or keeps flashing.
After you have traveled a few miles and your tires have inflated, the light should turn off. The light might, however, continue to be on in rare situations.
After you’ve reset the TPMS on your Hyundai Elantra, try the following if the tire-pressure light still illuminates:
- Drive for ten minutes after starting the car. The sensor in the TPMS should be reset by traveling at 50 miles per hour for around 10 minutes.
- Resetting the TPMS sensor involves deflating and inflating each tire on the automobile, including the spare. The recommended tire pressure for a Hyundai Elantra is 33 PSI. Inflate all the tires to this level, then release all the air. All of the flat tires should be inflated after which the TPMS should reset and the light should go out.
- When the engine is off in the car, cut the positive battery cable. After the cable has been removed, start the vehicle and honk the horn for around five seconds. The last of the power in the car will be released by honking the horn. The system will reset after you reconnect the positive battery cable.
After following these recommendations, if your Hyundai Elantra’s tire pressure light still won’t go out, check your owner’s manual or take it to a mechanic for a professional diagnosis and repair.
A battery provides power to the dashboard lights on a car. If the tire-pressure light on your car keeps flashing, it can mean the battery needs to be checked.
On a 2022 Hyundai Tucson, how do you reset the tire pressure indicator?
- Put the car in park.
- Start the engine.
- Until the Settings menu shows on the screen, continually press the Mode button on the steering wheel.
- To scroll to the Tire Pressure screen, press the downarrow key.
- Each tire’s pressure should be checked.
- The screen will display the low-pressure tire.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
Should your tire pressure light be reset?
You should first check the pressure in your tires. Remember to check every tire, including your spare. It should reset your tire pressure indicator as long as your tires are correctly filled and fall within the acceptable range for your car.
You might need to fix your tire, have your TPMS examined, or try one of the following if the light is still on after setting the tire to the appropriate PSI:
- Drive for ten minutes. Attempt to reach a speed of 50 MPH.
- A TPMS reset button or process may be available in your car’s vehicle control center. Examine a professional or consult your owner’s manual (highly recommended).
Important information: If the pressure isn’t set to the car’s specifications, resetting the TPMS with a button or the vehicle control center may have negative effects.
Les Schwab experts are familiar with the reset processes to complete the task if those solutions don’t work. Each sensor can be programmed into the computer system of your car using tools we have. The next time you start your car or truck, or a few miles down the road, the indicator light ought to go out once your tires are correctly inflated or repaired.
How can I disable the tire pressure indicator?
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service center for qualified help.
My tire pressure is fine, so why won’t the light go off?
How to Reset the Tire Pressure Light Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
On a Hyundai Sonata, where is the TPMS reset button located?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. When the tire pressure monitor system light blinks three times, hold down the reset button.
My tires are in good condition, so why is my low tire pressure sign on?
While the tires appear to be in good condition and the low tire pressure light is ON, you can:
- simply press a button to reset the machine and observe the results; or
- The sensors need to be changed since one or more of them are damaged.
After starting the vehicle, the low tire pressure warning light ought to turn on for a few seconds. The light ought to be turned off right away.
Drive your car, preferably to the closest gas station or tire shop, to check the air pressure in each tire if the low tire pressure warning light is still on.
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
But if the low tire pressure warning light is still on and all the tires are adequately inflated and warmed up, move on to the next step.
Take this opportunity to get out the owner’s manual. The TPMS reset button may be found on the console or in the glove box, depending on the make and model of your car.
Here are the steps to take after finding the TPMS reset button:
- Don’t start the engine after turning the key to the ON position.
- For at least three seconds, press and hold the TPMS reset button before letting go. The system will switch off the warning light and produce a beep or other audible alert.
- To finish the reset process, start the engine and drive the vehicle for 30 to 1 hour at a minimum speed of 19 mph.
- It’s time to check or replace the TPMs sensors if the warning light comes back on.
- To get the system tested, drive to the nearest tire store or dealership.
If your car has TPMS, avoid making it a practice of resetting it every time the low tire pressure warning light comes on.
Your safety is considered during the system’s design. The pace of technological advancement means that the TPMS sensors get better with each new model. However, you should make it a practice to check the tire pressure each time you get in the car in order to get the most out of what you have.
Use a different method than the TPMS to check the tire pressure. A quick visual check is sufficient to establish the existence of a flat.
Here’s a helpful hint: just in case, always have a tiny tire pressure gauge in the glove box. You may check the real tire pressure with this straightforward gadget before the TPMS activates.
Take your vehicle to the shop so they can “re-learn” the sensor with a specific tool if your TPMS light is still on. These tools are available online, but they are not inexpensive. I would advise researching the Autel TS501.
Why is the light on my tire still on?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.