The diagnostic problem code (DTC) that the engine’s control unit (ECU) has thrown will inform You of the cause of the check engine light (CEL) turning on in Your 2017 Hyundai Elantra. Simply getting rid of it won’t get rid of the symptom; it will probably return. You can generally get the code read and cleared for free at AutoZone if you bring your car there. Additionally, you can purchase a bluetooth dongle or scantool that enables you to couple your smartphone with the OBD-II port, read the code, and then clear it. You can remove the negative cable from your battery and leave it that way for half an hour if you just want the CEL to go away (for instance, if it was caused by a loose gas cap, low tire pressure, or another issue that has been fixed but the ECU isn’t detecting it). about an hour. Typically, this will erase any DTCs, but be aware that it will also erase your radio presets and other settings.
Try disconnecting the battery cables for 10-15 minutes, reconnecting them, or turning the ignition key to the “on” and “off” positions twice before starting the engine to reset the check engine light in your 2017 Hyundai Elantra. The light should then go out.
A week after I bought my 2017 Hyundai Elantra GT, the engine light turned on. Hyundai dealership won’t honor my warranty on the engine even though I’m the second owner. Light came on once more and I was informed that I would need to replace my engine for 5,000 plus labor. I’m not near to the warranty up to 159000 miles. Not honoring a warranty?
The clear code button on my scan gauge worked on all of my other cars, but not on this one; I had to briefly disconnect the battery.
What happens if you’ve been driving the automobile for the past four to five months and the Check Engine light STILL isn’t off? I think my information “been Erased.”
In This Article...
SERPRESULT
Your 2017 Hyundai Elantra’s check engine light will typically turn off by itself if the problem or code that triggered it is fixed.
Hyundai Check Engine Light Frequently Occurring Issues * Loose Gas Cap: Your gas cap is loose, cracked, or just missing
How can the check engine light be turned off on a 2017 Hyundai Elantra?
Your 2017 Hyundai Elantra’s check engine light will typically turn off by itself if the problem or code that activated it is fixed. For instance, if a loose gas cap was the reason your check engine light illuminated, it will turn off once the cap is tightened.
Why is the 2017 Hyundai Elantra’s check engine light on?
Your 2017 Hyundai Elantra’s check engine light will begin flashing if there is an urgent need for repair, so you should bring your Hyundai in right away. Usually, a strong engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light.
How can a Hyundai’s check engine light be reset?
- As you drive, let the light turn off on its own. None.
- Three consecutive times of starting and stopping the engine None.
- Reconnect the battery after disconnecting it. Wrench.
- Use a code reader for the OBD
Why does my Hyundai Elantra’s check engine light come on?
Flashing Check Engine Light on a Hyundai Elantra A damaged oxygen sensor, a problem with the fuel injection system, a problem with the head gasket, a filthy mass airflow sensor, or defective spark plugs are some other frequent causes of a check engine light.
Can I manually reset the check engine light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Can my Hyundai be driven with the check engine light on?
We strongly advise not driving your Hyundai while the check engine light is on and setting up Hyundai servicing right soon. The most frequent causes of your check engine light appearing are listed below: You must replace your mass airflow sensor, or MAF.
Resetting the check engine light at Autozone?
Are you curious if your neighborhood Autozone can extinguish a check engine light? The answer is “yes,” but there are a few points to keep in mind:
- Local auto parts shops frequently offer to read your codes for free, but not all of them will turn off the light because of legal concerns. Some of them aren’t even equipped with code scanners for the check engine light.
- Whether or whether it is obvious that the components will cure your check engine light, salespeople are frequently encouraged to sell you items while you are at the store (and may actually be a waste of money).
How far must you travel to turn the check engine light off?
You are urged to do any required repairs or make sure the aforementioned component is working correctly for best results.
Connecting the OBD2 scanner first
Start by joining the OBD2 scanner to the diagnostic port of the car. Start the engine and allow the code reader to display the codes for the check engine light.
2. Delete the error codes
Continue by erasing the recorded check engine codes using the code reader’s user interface. When you’re finished, no error messages ought to show up. At this moment, you can turn off the engine.
3. Log a few miles
Drive your car between 30 and 100 miles to ensure the check engine light does not come back on. The “Drive Cycle” of the car can then be reset because the various sensors need time to calibrate.
The “driving cycle” must register as ready and the check engine light must remain off if you intend to perform an emissions test. Drive cycle readiness is often achieved after 50 to 100 miles of driving, however it’s better to consult your dealership or mechanic regarding the applicability for your particular vehicle.
Without a scanner, how can I turn off my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
Why is there no code for my check engine light?
There are a few potential reasons why your check engine light can be on even if you don’t have any saved issue codes. Find out by reading on!
Your dashboard’s Check Engine Light is a warning sign that something is wrong. In most situations, you would get out your code scanner and determine the source of the problem.
So what do you do if there are no diagnostic codes that indicate what the issue is? There are reasons why the Check Engine Light may be on even when no codes are present, notwithstanding the rarity of the situation.
How can I switch off the engine light?
Turning the ignition on and off is an even easier approach to switch off the engine management light. The result of this method is the same as the previous one’s, except the battery is not disconnected.
Can the check engine light be turned off by unplugging the battery?
3) Unplug the battery before re-plugging it in. Ideally, this will erase the data and turn the light off. After that, you can turn on the ignition and reconnect the battery. The check engine light ought to go out after roughly a minute.
Check engine light is AutoZone capable?
AutoZone scans check engine lights, right? AutoZone can identify codes from the check engine light, yes. If you’re unsure of why your engine light came on, visit your neighborhood AutoZone so that one of our staff members can use our free Fix Finder service to identify the problem.
What does a check engine light that is solid yellow indicate?
To monitor what is happening inside your car, the onboard diagnostic system interacts with various components of it. A warning indicator light is sent to your dashboard when there is a problem with the electronic control system to let you know there is a problem. Depending on how the light appears on your dashboard, you can determine whether it’s a serious or minor problem.
It’s not usually a significant problem, but the constant yellow light is alerting you to take a look and solve the small problem as soon as you can. The engine of your car is misfiring if the light is flashing, therefore you need to look into the issue right away. If you don’t think it’s safe to drive, you don’t need to stop immediately away. However, you run the risk of damaging the engine of your car if you ignore the bright or flashing light. If your engine light illuminates, we advise performing the actions listed below.
Why is my engine light on when there doesn’t seem to be a problem?
The on-board diagnostic system uses the “check engine” light to alert you of problems. However, that something might be any number of other things, great or tiny. It might turn on due to a minor issue, such as a gas cap that is loose or broken. It might also indicate a serious engine breakdown.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
What is the time it takes for the check engine light to go out?
The Lamp Is On. The internal computer of the car only resets after a predetermined interval during which it rechecks all of its sensors. After around 10 to 20 cycles, the reset may occur automatically. When you start the car and then turn it off again, you are in a cycle.
What happens when the automobile computer is reset?
Before taking the bother to fix this part on your car, you might want to know what a reset can help with. It is a lot of effort, after all. All of these might not be necessary if you don’t need to reset. You might even put your car in danger.
- enabling you to start the engine of your car
- remove the check engine light
- resolving any irregular engine activity
- Eliminate any strange burning odors or odours
Fixing this device will help all of these. It is crucial to know how to reset the computer in your car for this reason.
Make sure to examine the car’s computer if you experience any of these issues. You’ll probably benefit from a complete reset rather than having to pay a hefty sum to a mechanic who might or might not be able to solve the issue. We shall then begin the reset procedure. There are two primary approaches.
The best approach to purchase a car is through the CoPilot app. We’ll show you all you need to know about each listing, including how long it’s been on the lot and whether or not there are comparable cars in the area for less money. We’re built using the same technologies that dealerships use.