The 2018 Hyundai Sonata’s check engine light can be reset in a number of ways, but occasionally it will turn off on its own after some time behind the wheel. You can also unplug the battery, wait for about 20 minutes, and then plug it back in to reset the check engine light on your car. You will need to utilize an electronic scan tool to identify the issue and resolve it if neither of those solutions work. You may check to see whether the gas cap is loose, which is one of the common reasons why the light might be on, without the need for a scanner. If that isn’t the issue, you’ll need to use the scanner to identify the issue, resolve it, and then reset it using the scanner.
Connect an OBD II scanner to the Hyundai Sonata’s appropriate port, then follow the instructions on the scanner to reset the check engine light.
In This Article...
SERPRESULT
If the problem or code that caused your Hyundai Sonata’s check engine light to come on is resolved, it will typically turn off by itself.
Your 2016 Hyundai Sonata’s check engine light will typically turn off by itself if the problem or code that triggered it is fixed.
Will the check engine light automatically turn off? Your Hyundai Sonata’s check engine light will usually turn off by itself if the problem or code that
How can a Hyundai’s check engine light be reset?
- As you drive, let the light turn off on its own. None.
- Three consecutive times of starting and stopping the engine None.
- Reconnect the battery after disconnecting it. Wrench.
- Use a code reader for the OBD
What should you do if the Hyundai check engine light is on?
The check engine light on your Hyundai will come on if the MAF isn’t working properly. Usually, changing your air filter will take care of the issue. Through our parts center, you may place an online order for an air filter. Oxygen Sensor: To assess how much gasoline is being used, this part measures the oxygen levels in the exhaust.
On a 2016 Hyundai Sonata, how do you turn off the check engine light?
If the problem or code that caused your 2016 Hyundai Sonata’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light illuminated, it will turn off once the cap is tightened.
Can I manually reset the check engine light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Why would my Hyundai Sonata’s check engine light turn on?
If your Hyundai Sonata’s check engine light begins to flash, the issue requires immediate attention, and your Hyundai should be taken in right away. Usually, a serious engine misfire that causes unburned fuel to leak into the exhaust system is indicated by this blinking light.
Resetting the check engine light at Autozone?
Are you curious if your neighborhood Autozone can extinguish a check engine light? The answer is “yes,” but there are a few points to keep in mind:
- Local auto parts shops frequently offer to read your codes for free, but not all of them will turn off the light because of legal concerns. Some of them aren’t even equipped with code scanners for the check engine light.
- Whether or whether it is obvious that the components will cure your check engine light, salespeople are frequently encouraged to sell you items while you are at the store (and may actually be a waste of money).
Can my Hyundai be driven with the check engine light on?
We strongly advise not driving your Hyundai while the check engine light is on and setting up Hyundai servicing right soon. The most frequent causes of your check engine light appearing are listed below: You must replace your mass airflow sensor, or MAF.
Without a scanner, how can I turn off my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
How far must you travel to turn the check engine light off?
You are urged to do any required repairs or make sure the aforementioned component is working correctly for best results.
Connecting the OBD2 scanner first
Start by joining the OBD2 scanner to the diagnostic port of the car. Start the engine and allow the code reader to display the codes for the check engine light.
2. Delete the error codes
Continue by erasing the recorded check engine codes using the code reader’s user interface. When you’re finished, no error messages ought to show up. At this moment, you can turn off the engine.
3. Log a few miles
Drive your car between 30 and 100 miles to ensure the check engine light does not come back on. The “Drive Cycle” of the car can then be reset because the various sensors need time to calibrate.
The “driving cycle” must register as ready and the check engine light must remain off if you intend to perform an emissions test. Drive cycle readiness is often achieved after 50 to 100 miles of driving, however it’s better to consult your dealership or mechanic regarding the applicability for your particular vehicle.
Why is there no code for my check engine light?
There are a few potential reasons why your check engine light can be on even if you don’t have any saved issue codes. Find out by reading on!
Your dashboard’s Check Engine Light is a warning sign that something is wrong. In most situations, you would get out your code scanner and determine the source of the problem.
So what do you do if there are no diagnostic codes that indicate what the issue is? There are reasons why the Check Engine Light may be on even when no codes are present, notwithstanding the rarity of the situation.
How can I switch off the engine light?
Turning the ignition on and off is an even easier approach to switch off the engine management light. The result of this method is the same as the previous one’s, except the battery is not disconnected.
How much time does it take for the check engine light to turn off?
The Lamp Is On. The internal computer of the car only resets after a predetermined interval during which it rechecks all of its sensors. After around 10 to 20 cycles, the reset may occur automatically. When you start the car and then turn it off again, you are in a cycle.
Will changing the gas cap the check engine light off?
The check engine light can occasionally be set off by a loose or damaged gas cap. The fumes that are emitted are usually the cause of this. Simply take off and reinstall your gas cap. If you start your automobile, the engine light can already be back on.
Why is the check engine light yellow?
Depending on the issue, if the check engine light comes on, it may flicker or be on all the time. A issue that requires immediate attention is indicated by a blinking light, or in some cars, a red light instead of a yellow or orange light. In either case, you ought to have the car looked at by a mechanic.
An engine misfire that is severe enough in late-model cars to send unburned fuel into the exhaust system, where it can quickly destroy the catalytic converter and necessitate an expensive repair, is typically indicated by a blinking light. If that occurs, you should turn down the engine and get the automobile or truck checked out as soon as you can.
Even if there is no immediate danger if the light is steady, you should make an appointment as soon as feasible. Even while your fuel mileage may be declining and your vehicle may be spewing unsafe amounts of hydrocarbons and other pollutants, you might not notice a decline in performance since modern automotive systems frequently try to adjust when there is a problem.
According to Jim Collins, a national training team leader for Ford Motor Co., “The customer is really, in the long run, potentially hurting their pocketbook by leaving that light on and ignoring it.” The car’s computer may in some severe circumstances lower power for you in an effort to lessen the likelihood of damage.
Here are some recommendations on what you should do if the check engine light illuminates:
- Search for a critical issue that need quick action. Look for any warning signs of low oil pressure or overheating on your dashboard in the gauges and lights. These circumstances call for you to stop and turn off the engine as soon as you can find a secure location to do so. On some cars, a yellow check engine light indicates troubleshoot, while a red one commands immediate stopping.
- Possibly tighten the gas cap. This frequently makes the issue go away. The light might not reset for a while, so keep that in mind. Some automobiles feature a secondary indicator that sounds when the gas cap is loose.
- Reduce the load and speed. Reduce your speed and make an effort to lessen the demands on the engine if the check engine light is on or you notice any major performance issues, including a lack of power. For instance, it would be wise to put an end to hauling a trailer. Get the car evaluated as soon as you can to avoid costly damage.
- If any built-in diagnostic tools are available, use them. Many contemporary vehicles feature built-in remote diagnostic capabilities that allow for reporting on fault codes and scheduling an appointment for service. Today, numerous automakers offer remote diagnostics and the option to book a service appointment, including Fiat Chrysler, Ford, Hyundai, Jaguar/Land Rover, and Volvo.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
Why is my engine light on when there doesn’t seem to be a problem?
The on-board diagnostic system uses the “check engine” light to alert you of problems. However, that something might be any number of other things, great or tiny. It might turn on due to a minor issue, such as a gas cap that is loose or broken. It might also indicate a serious engine breakdown.
What does a check engine light that is solid mean?
The Check Engine Light may illuminate either continuously or intermittently. They have two distinct meanings.
When the engine light flashes while it is on, there is an urgent problem. Find a secure location to stop your car, then turn it off. Perhaps you could think about having it towed to the shop. To prevent damage to your car, a specialist needs to identify the issue as soon as possible. A severe issue arises when the check engine light flashes.
Even though there may still be cause for concern if the engine light remains steady, you don’t need to panic right away. A solid Check Engine Light may signify a simple issue, such as a loose gas cap, or it may point to a more serious issue, such as a fuel, timing, or transmission problem. Although there isn’t the same urgency as if the light were flashing directly at you, have your car looked at.