The diagnostic problem code (DTC) that the engine’s control unit (ECU) has thrown will inform You of the cause of the check engine light (CEL) turning on in Your 2017 Hyundai Elantra. Simply getting rid of it won’t get rid of the symptom; it will probably return. You can generally get the code read and cleared for free at AutoZone if you bring your car there. Additionally, you can purchase a bluetooth dongle or scantool that enables you to couple your smartphone with the OBD-II port, read the code, and then clear it. You can remove the negative cable from your battery and leave it that way for half an hour if you just want the CEL to go away (for instance, if it was caused by a loose gas cap, low tire pressure, or another issue that has been fixed but the ECU isn’t detecting it). about an hour. Typically, this will erase any DTCs, but be aware that it will also erase your radio presets and other settings.
Try disconnecting the battery cables for 10-15 minutes, reconnecting them, or turning the ignition key to the “on” and “off” positions twice before starting the engine to reset the check engine light in your 2017 Hyundai Elantra. The light should then go out.
A week after I bought my 2017 Hyundai Elantra GT, the engine light turned on. Hyundai dealership won’t honor my warranty on the engine even though I’m the second owner. Light came on once more and I was informed that I would need to replace my engine for 5,000 plus labor. I’m not near to the warranty up to 159000 miles. Not honoring a warranty?
The clear code button on my scan gauge worked on all of my other cars, but not on this one; I had to briefly disconnect the battery.
What happens if you’ve been driving the automobile for the past four to five months and the Check Engine light STILL isn’t off? I think my information “been Erased.”
In This Article...
SERPRESULT
If the problem or code that caused your Hyundai Elantra’s check engine light to come on is resolved, it will typically turn off by itself.
Will the check engine light automatically turn off? Your 2017 Hyundai Elantra’s check engine light will typically turn off by itself if the problem or code that triggered it is fixed.
Hyundai Check Engine Light Frequently Occurring Issues * Loose Gas Cap: Your gas cap is loose, cracked, or just missing
What should I do if my Hyundai Elantra’s check engine light is on?
If the problem or code that caused your Hyundai Elantra’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light illuminated, it will turn off once the cap is tightened.
How can the check engine light be reset?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Why is the 2017 Hyundai Elantra’s check engine light on?
Your 2017 Hyundai Elantra’s check engine light will begin flashing if there is an urgent need for repair, so you should bring your Hyundai in right away. Usually, a strong engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light.
Without a scanner, how can I reset my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
Why is the engine light on in my Hyundai?
As you proceed, the check engine light on your Hyundai begins to illuminate. What might this indicate, and what ought you to do? Not to worry! Regardless of how big the issue is, it does require treatment even if it turns out to be a very little one. Service by Faulkner Hyundai is available.
When your check engine light illuminates, it means that your car’s onboard diagnostic system, often known as OBD, has identified an issue that could have an impact on how your engine operates. Your check engine light may indicate a number of issues. It can indicate a broken or missing gas cap, a malfunctioning oxygen sensor, a catalytic converter that isn’t working properly, a broken mass air flow sensor, or a cylinder that misfired. If you’re unsure, schedule a service appointment with us today, and we’ll determine the issue and have it resolved right away!
Your check engine light cannot be reset by pressing a single button. If the issue doesn’t come up again, the indicator will automatically turn off. If the light doesn’t go out, you should have it scanned to stop the issue from getting worse.
The Service Department at Faulkner Hyundai Philadelphia offers a thorough examination of your OBD system to identify the precise source of the issue and lower the cost of your repairs. The inspection reading is used to identify the cause of the light’s activation and what is required to resolve the issue. Misdiagnosis of the source of your check engine light may result in expensive repairs.
You can trust the skilled experts at Faulkner Hyundai Service to identify the cause of your check engine light and maybe save spending a ton of money on needless items. If a part isn’t absolutely necessary for your car, we won’t sell it to you.
To schedule a diagnostic test if your check engine light is on and you want to figure out what the issue is, call the service center at Faulkner Hyundai Philadelphia.
Can the check engine light be reset without cutting the battery?
Can the check engine light be turned off without cutting the battery? Using an OBD2 scanner, you can turn off the check engine light without unplugging the battery. Most automobile models’ check engine lights will turn off on their own if you drive for a sufficient amount of time after addressing the issue.
What is the price to reset the check engine light?
The current national average repair cost for a vehicle’s check engine light is $357, which includes labor ($141) and parts ($216).
How long does the check engine light take to turn off?
The check engine light will go away after about three days of steady driving. Cars function in cycles. The glow should go after finishing 10 to 30 cycles, which should take three days. As I mentioned earlier, your car goes through a cycle of turning on, driving till it warms up, then turning off once more.
Keep in mind that the issue that caused the light to turn on must be resolved in order for this procedure to be effective. Try several approaches if this one doesn’t work; if not, bring the automobile to an experienced mechanic.
Resetting the check engine light at Autozone?
Are you curious if your neighborhood Autozone can extinguish a check engine light? The answer is “yes,” but there are a few points to keep in mind:
- Local auto parts shops frequently offer to read your codes for free, but not all of them will turn off the light because of legal concerns. Some of them aren’t even equipped with code scanners for the check engine light.
- Whether or whether it is obvious that the components will cure your check engine light, salespeople are frequently encouraged to sell you items while you are at the store (and may actually be a waste of money).
Can my Hyundai be driven with the check engine light on?
We strongly advise not driving your Hyundai while the check engine light is on and setting up Hyundai servicing right soon. The most frequent causes of your check engine light appearing are listed below: You must replace your mass airflow sensor, or MAF.
Why is the check engine light yellow?
Depending on the issue, if the check engine light comes on, it may flicker or be on all the time. A issue that requires immediate attention is indicated by a blinking light, or in some cars, a red light instead of a yellow or orange light. In either case, you ought to have the car looked at by a mechanic.
An engine misfire that is severe enough in late-model cars to send unburned fuel into the exhaust system, where it can quickly destroy the catalytic converter and necessitate an expensive repair, is typically indicated by a blinking light. If that occurs, you should turn down the engine and get the automobile or truck checked out as soon as you can.
Even if there is no immediate danger if the light is steady, you should make an appointment as soon as feasible. Even while your fuel mileage may be declining and your vehicle may be spewing unsafe amounts of hydrocarbons and other pollutants, you might not notice a decline in performance since modern automotive systems frequently try to adjust when there is a problem.
According to Jim Collins, a national training team leader for Ford Motor Co., “The customer is really, in the long run, potentially hurting their pocketbook by leaving that light on and ignoring it.” The car’s computer may in some severe circumstances lower power for you in an effort to lessen the likelihood of damage.
Here are some recommendations on what you should do if the check engine light illuminates:
- Search for a critical issue that need quick action. Look for any warning signs of low oil pressure or overheating on your dashboard in the gauges and lights. These circumstances call for you to stop and turn off the engine as soon as you can find a secure location to do so. On some cars, a yellow check engine light indicates troubleshoot, while a red one commands immediate stopping.
- Possibly tighten the gas cap. This frequently makes the issue go away. The light might not reset for a while, so keep that in mind. Some automobiles feature a secondary indicator that sounds when the gas cap is loose.
- Reduce the load and speed. Reduce your speed and make an effort to lessen the demands on the engine if the check engine light is on or you notice any major performance issues, including a lack of power. For instance, it would be wise to put an end to hauling a trailer. Get the car evaluated as soon as you can to avoid costly damage.
- If any built-in diagnostic tools are available, use them. Many contemporary vehicles feature built-in remote diagnostic capabilities that allow for reporting on fault codes and scheduling an appointment for service. Today, numerous automakers offer remote diagnostics and the option to book a service appointment, including Fiat Chrysler, Ford, Hyundai, Jaguar/Land Rover, and Volvo.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
What does a check engine light that is solid mean?
The Check Engine Light may illuminate either continuously or intermittently. They have two distinct meanings.
When the engine light flashes while it is on, there is an urgent problem. Find a secure location to stop your car, then turn it off. Perhaps you could think about having it towed to the shop. To prevent damage to your car, a specialist needs to identify the issue as soon as possible. A severe issue arises when the check engine light flashes.
Even though there may still be cause for concern if the engine light remains steady, you don’t need to panic right away. A solid Check Engine Light may signify a simple issue, such as a loose gas cap, or it may point to a more serious issue, such as a fuel, timing, or transmission problem. Although there isn’t the same urgency as if the light were flashing directly at you, have your car looked at.