For the 2013 Hyundai Elantra, press the air bag reset button. You must carry out these easy steps. However, do not start the motor before turning the ignition key to the on position. As you wait, the air bag light should turn on in about 15 seconds. Turn the ignition to the off position as soon as the light turns on. Then, switch it back on when three seconds have passed. Follow these instructions three more times. On the final iteration, the air bag light should blink three times. Now the light is back on.
Turn the ignition key to the “on” position and wait for the airbag button to glow before switching off to reset the airbag light in your 2013 Hyundai Elantra. Wait three seconds after turning the key to the off position. Once you have completed these instructions twice, the airbag system in your car should be reset.
In This Article...
Turn on and off your ignition.
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before automatically turning off. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
benvei
There is no doubt that you should check your airbag control module; something must have turned on that light. You might have harmed some of the yellow airbag wiring while installing your radio. I believe the airbag wiring to the passenger side airbag is located directly behind the radio.
With an OBD-II scanner that can examine the airbag module (not the $5 ones on eBay), you can reset the code. I don’t think it’s a smart idea to simply reset it without looking into what caused it. Personally, I wouldn’t interfere with the airbag system; instead, I’d let the dealer check it out to make sure everything is in order. OBD Scanners that can check ABS, Airbag, and other things are not cheap, so perhaps that is also the less expensive option.
How Can the Airbag Light Be Reset? (5 Steps) Whether Scanner Is Used
Your life may one day be saved by an airbag if an accident occurs. It’s time to turn the airbag light back on if you repaired the airbag system. Here’s how to go about it.
Do you want to know how to reset your airbag light after it appeared on your dashboard?
When certain dashboard lights come on, like the engine or airbag lights, you should pay close attention—the airbag light in particular is crucial for your safety.
When the light is on, the airbag will not deploy as it is intended to do whenever there is a collision.
If my airbag light is on, what should I do?
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
Dashboard Warning Lights Explained, which offers guidance on a variety of lights and their meanings, is a good resource if you want to learn what additional warning lights represent and what to do when they illuminate.
Can the airbag light self-reset?
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
What is the cost of turning off an airbag light?
Reset Airbag Light, at No. 1 Although it typically costs a few hundred dollars and takes several hours, depending on the type of automobile it might cost as much as $600.
Can the airbag module be reset?
After receiving your repaired module from us, you won’t need to take it to the dealership for additional programming because we reset all fault codes.
Except for modules that were harmed by a flood, fire, or another type of hardware damage, all airbag control modules can be reset and reprogrammed.
Accident-related hard and soft codes are stored in airbag control modules. The module that activates the airbag light will keep error codes even after minor incidents. To turn off the airbag light, we reset and erase all of these crash codes from the computer module.
Why won’t my airbag light activate?
The backup battery is dead. It is the most frequent cause of an airbag light that won’t go off. It might take place if your car’s battery is running low or has been depleted for any other cause. Once the battery is fully recharged, the issue will be resolved. But the battery might still be in place.
Why is the flashing passenger airbag light on?
A light on your instrument cluster turning on, or worse, continuing to blink, is one of the most annoying things that may happen. Please allow me to explain what you can do to disable the airbag light if you are having this issue personally.
It’s crucial to first understand why your car’s airbag light initially illuminated. There are several causes. It can indicate that your battery backup is dead, that your airbag clock spring is broken, or that the SRS airbag control module is malfunctioning. It might potentially indicate a problem with your impact sensors or seat belts. Whatever the cause of the airbag light may be, the major concern you should have is that unless the problem is resolved, your airbags won’t deploy in subsequent collisions. This implies that every time you get in your car to drive, you put yourself at risk for harm or perhaps death.
What could turn on the airbag light in my vehicle?
The airbag light will be on if your airbag has been deployed and has not been correctly reset. The light will turn on if the airbag hasn’t been deployed when the system detects that it can’t activate the airbag; this indicates that your car’s airbag system is having some sort of issue.
Can an airbag code be cleared?
Two categories of codes exist:
- Unhard Codes
- Precise Codes
Yes, most scanners allow you to delete soft codes after a problem has been fixed. These codes represent a malfunction with an element or component of the SRS system, such as
- vehicle airbag codes
- codes for seatbelts
- coded impact sensors
No, scanners are unable to remove these codes. These codes, which are also known as crash data, are kept following a car accident. These codes are also hardware error codes.
Should the airbag light remain on?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it remains illuminated in your car.
Where is the switch for the passenger airbag?
If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS).
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel.
ALL FRONT-FACING PASSENGERS (CHILDREN AND ADULTS) CAN SIT SAFELY ON THE PASSENGER SEAT WHEN THE AIRBAG IS ACTIVATED.
Rear-facing child seats are safe for use on the passenger seat when the airbag is switched to OFF.
If the airbag light is on, will the airbags deploy?
This light indicates that your airbags are deactivated while it is on. It implies that if you have an accident, they won’t deploy properly. The backup battery that powers the airbags may have also run out if your car’s battery recently discharged.
How is an airbag sensor tested?
The airbag sensor can be inspected and tested using a diagnostic scan tool. The best approach to find out if your car’s airbag sensor is broken is to do this.
To determine the precise problem, you must take your car to a qualified mechanic who is skilled in using the tool. When testing the airbags, keep in mind that using a multimeter will only cause them to deploy.
Can a fuse turn on the airbag light?
Only if the blown fuse is directly connected to the airbag system may it cause the airbag light to turn on and off. Although this is the primary reason for this light, other problems can cause an airbag light to suddenly come on.
The airbag system can malfunction, you can interfere with the seat belt sensor, there is a broken clock spring, there is damaged cabling under the seat, the computer system receives incorrect data, or the sensor was damaged in an accident, which can cause the light to turn on and off.
Driving with the airbag light on is it forbidden?
In some vehicles, it is even possible to turn off the passenger airbags, which will make your dashboard’s airbag light come on.
You should only deactivate the passenger airbag when absolutely necessary because, as was previously said, airbags are an essential safety element.
If your airbag light ever illuminates for no apparent reason, you should try to resolve the situation.
What is the price of replacing an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Avoid taking the chance by always purchasing OEM original, genuine products and never aftermarket sensors.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the automobile would deploy, costing thousands of dollars to repair.
How much does servicing an airbag cost?
The cost of replacing an airbag can be significantly more than the airbag itself. They take a long time to replace, and the cost of replacing all the linked parts adds up quickly.
Expect to pay, on average, between $1,000 and $1,500 for each replacement airbag. Just the airbags themselves are included; other parts that require replacement are not. A replacement airbag module will cost an additional $600 and above.
Therefore, if your driver’s and passenger’s front airbags have deployed as a result of a frontal collision, you should budget about $3,000 to repair your airbag system. Getting your car roadworthy goes above and beyond bodywork! Is it cheaper to sell your car instead of paying these expenditures to fix it?
Of course, the overall cost of repair for replacing your airbags and/or your instrument panel may vary based on the year, make, and model of your car. As an illustration, the cost to repair the driver-side airbags on a Ford F150 ranges from $200 to $700. The cost of replacing the side passenger airbags in a Honda Civic ranges from $400 to $1,000. Depending on the manufacturer, cars like BMW, Nissan Altima, Toyota Camry, and others may be expensive or affordable.