Clearing the codes with an OBDII scanner is the right technique to restart the ABS light on a Santa Fe. You will need to manually turn off the warning light by connecting a diagnostic device and then erasing all the error codes associated with the ABS system if it doesn’t do so after you fix the problem.
In This Article...
What the ABS light on a Hyundai Santa Fe means
We will now move on to the subject that you are undoubtedly more interested in: what does an ABS warning light on a Hyundai Santa Fe mean? First of all, because it is orange, turning it on indicates a problem with your ABS system. You should adjust your driving and avoid taking any risks because the ABS will go into safety mode whenever the ABS warning light is on. The following issues can be indicated by the Hyundai Santa Fe’s ABS warning light:
- Simple short circuits, faulty wiring, relay, or fuses are all potential causes. Check it using a pressure gauge.
- An erroneous ABS sensor Your Hyundai Santa Fe’s ABS light will turn on if one of them fails.
- Your Hyundai Santa Fe’s ABS hydraulic block: If it is damaged, it’s conceivable that the indicator light will turn on and your ABS won’t function.
- The ABS computer: Being the hub of all decisions made to operate your ABS, if the computer has a problem, the light will unavoidably turn on.
This morning, my ESC, DBC, and ABS warning lights all came on simultaneously.
GekoFreako inquired about the 2013 Hyundai Santa Fe Limited FWD on May 16, 2016 at 8:34 AM.
The Hyundai Santa Fe Limited I have is from 2013. My driving experience has not changed, as far as I can tell. Although my manual instructs me to visit the dealer, I find it strange that all three of the lights should come on simultaneously. Perhaps the problem is more of an electrical or fuse blowout? I’ve not modified my driving circumstances either (I live in perpetually flat Miami). We appreciate any assistance!
What does the Hyundai Santa Fe’s ABS light signify?
When you constantly apply the brakes while driving on a road with poor traction, such as an icy one, the ABS will be active and the ABS warning light may come on. Put your car in park in a secure area, then turn off the engine.
How can the ESC light on a Hyundai Santa Fe be reset?
The ESC operates To turn off ESC, press the ESC OFF button for at least a half-second after turning the ignition ON. (The ESC OFF indicator will turn on.) Press the ESC OFF button to activate the ESC (ESC OFF indicator light will go off)
Can the ABS light be reset at Autozone?
general intent Because there is a distinct processor for the ABS system, OBD II scanners like Autozone may not be able to read ABS system problems; for this reason, it displays a different light from the CEL or MIL check engine light. Thus, it is unable to read and reset the codes and lights for the ABS (or SRS) systems.
What should I do if the brake and ABS lights are on?
- The ABS brake light does not indicate that you cannot brake at all. Instead, it indicates that both you and your brakes are now independent. If the weather is poor, your brakes will operate like they did before ABS. When you need your brakes the most, they could stick if there is no regulation. You must immediately have our service crew look it over if the light stays on. The ABS is a crucial safety element to maintain because it aids in vehicle control and shortens stopping distances.
- Your car is no longer safe to drive if both the ABS and the brake system light come on simultaneously. This indicates a significant issue with the vehicle’s braking system, and driving nevertheless puts you and other people in danger.
The sensor is sometimes referred to as the transmission speed sensor because of its location on the transmission of the car. To instruct the transmission when to shift, it transmits data to the engine’s computer and the speedometer. Make careful to have an Earnhardt Lexus specialist look at your car if your Lexus’s speedometer is broken or if shifting issues are accompanied by a check engine light.
Although Lexus cars receive high safety ratings, driving might be hazardous if they aren’t working properly. It’s crucial for the safety of your car that you don’t disregard check engine lights. By the time these lights come on, the issue has likely gotten worse and might even be endangering other parts of your car.
What is the time required to reset the ABS light?
Ignoring the issue and merely resetting the light will not solve it and may result in more expensive part repairs and serious auto accidents. Fault lights should not be reset until the issue has been found and fixed.
The light can be reset in one of two ways:
The simplest method is to unplug the battery terminal cables while the ignition is off, starting with the negative battery terminal and first positive connection.
The two terminals should be connected to one another using a battery jumper lead. Turn on the ignition and unlock the driver’s door for 20 to 25 minutes. Although the car won’t start, the light will be turned off as the electrical system’s remaining power is drained. First, reattach the terminal positive cable.
The other calls for two ports on the OBD II CONNECTOR to be jumped. To perform this properly, it is advised to use a fused bridge wire to prevent harm in the event that you unintentionally bridge the wrong ports.
Both of the aforementioned techniques should cause the lights to go out, coming back on only if the issue is still present.
Can AutoZone examine the cause of my ABS light’s on?
Unfortunately, reading your car’s codes is the only way to determine whether the ABS is the cause of the issue. As part of our Fix Finder service, AutoZone can scan your codes, or if you already have a scan tool, you can do it yourself. Reading the codes makes it easier to identify the true issue
What occurs if the ABS light remains on?
The standard brakes on your automobile should still function properly, however the antilock system that prevents wheels from locking up while braking will not. Additionally, because traction control and stability control rely on the same wheel-speed sensors as the antilock system, those features will also be disabled if your car has them.
All vehicles made in 2012 and later are obliged to feature traction control, ABS, and stability control. All or some of those features can be found in many vintage vehicles.
Every time you start your automobile, the ABS light (often yellow, amber, or orange) should briefly illuminate as a system check. If the light continues to illuminate, the system has been shut down because something isn’t operating properly.
With ABS, sensors that are put on each wheel track how quickly the wheels are spinning. When braking, if one wheel is rotating more slowly than the others, it means it is locking up, which could lead to skidding and a loss of steering control. ABS is designed to step in by quickly “pumping” the brakes at the wheel that is locking up, allowing it to spin and preserving steering and braking control for the driver.
What causes this is as follows:
- a system fuse that has blown
- a road grime- or damage-covered wheel-speed sensor
- between the sensors and the ABS controller, a broken wire
- A malfunctioning ABS controller
An ABS sensor warning light can also be activated when a pump and valve that apply the proper amount of braking fluid pressure to each wheel to prevent locking do so.
If the regular brakes’ red warning light illuminates, your car is likely losing braking fluid or the brakes are so worn that you can’t stop as quickly as usual. Any of such circumstances calls for prompt attention and perhaps repairs.
What triggers the ABS light to turn on and remain on?
The presence of an ABS indication light on your dashboard indicates that there may be a problem with your system and that you should have it checked properly. This indicator normally illuminates for one of four reasons: either the ABS module is broken, the fluid reservoir is low on fluid, the wheel speed sensors are damaged, or the system is off.
Ineffective ABS Module In fact, the traction control system in your car and the ABS have certain crucial parts in common. A device called traction control keeps all four wheels on the ground moving easily. It will cut off power from your engine until it regains steady traction if it notices that one wheel is beginning to spin erratically. This is intended to stop you from unintentionally exerting too much power, which could cause you to slip out of control. However, because your traction control and ABS share a control module and self-diagnostic system, they occasionally clash. The ABS light may illuminate in addition to the traction control light occasionally, however there are other situations when the ABS system is at fault. To pinpoint the precise problem, your car needs to be professionally diagnosed.
The fluid reservoir has low levels. Your brakes are hydraulic, which means they work by closing your brake pads and stopping your car by applying pressure from a cylinder against a fluid. This implies that the fluid level in your brake system must be steady and continuous. The volume of fluid will decrease and your brakes won’t function properly if there is a slow leak or if the fluid is allowed to evaporate out. Usually, sensors on your computer can find this, and if it does, it will turn on the ABS light.
Wheel speed sensors that are broken Wheel speed sensors are a piece of hardware that provide information to your computer about the individual speeds of the wheels. If the computer notices a deviation from these speeds, your traction control system will alter or switch power to another wheel to make up for it. However, a speed sensor can’t convey this information accurately if it becomes dusty or stops operating. It typically disables your ABS and/or traction control systems until you restart your car or the issue is fixed rather than making a ton of adjustments.
Your System Has Been Shut Down You might be surprised to learn that you can switch your traction control or ABS on and off. The indication light on your dash will often illuminate when the system is turned off to let you know that this crucial safety feature is malfunctioning. There is a good probability your system may have unintentionally turned off if only your traction control or ABS indicator is illuminated. Whether you’re unsure of where the switch is, check to see if you might have accidently bumped it. If so, refer to your owner’s manual.
Will the ABS light turn off by itself?
Every time you start the engine, your ABS system does a self-check. The ABS light should begin to blink on the dashboard as soon as you start the engine. This is typical and demonstrates that the ABS system is doing the necessary self-checks.
Again, it’s totally normal for the ABS Warning Light to flash on and off in this manner, and depending on your car, it typically lasts for 2-4 seconds. We have a problem when the ABS light is illuminated for a prolonged period of time.
Depending on the vehicle you drive, you might also encounter:
- a clanging sound came from the ABS test. Your ABS system’s engagement and disengagement can be audible in this sound.
- The brake pedal is pulsing as a result of your ABS system turning on and off.
- If your ABS system is turned off or disengaged, you should still be able to use the standard brake controls.