How To Reprogram Hyundai Key Fob?

Hyundai / By
  • Upon entering your Hyundai, check that all of the doors are closed.
  • Turn your Hyundai’s ignition to the “ACC” (accessory) position using your key.
  • Keep pressing the “open” or “unlock” button on your key fob until the light on your car flashes.
  • Congratulations

Step 3

When the car’s lights start to flash, press and hold the “Open” or “Unlock” button on the keyless entry FOB. Your Hyundai vehicle has now been reconfigured to the keyless entry FOB.

  • Only Hyundai keyless entry FOBs that have already been programmed can be reprogrammed using these keyless entry FOB programming instructions.
  • Toyota key
  • Keyless entry FOB previously programmed for a Hyundai
  • Not all Hyundai car models may be compatible with these setting recommendations. For assistance with programming a keyless entry FOB for a specific model, speak with your nearby Hyundai dealership or service center.

Can I program a Hyundai key myself, or do I require specialized equipment?

Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.

There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.

Modifying a Hyundai Proximity Key

If you recently changed the battery in your key fob, this method is easy to use and quite successful. Keep in mind that following every car or FOB battery change, Hyundai key fobs that were originally programmed by dealers must be reprogrammed.

To begin reprogramming your proximity keys, simply adhere to the short instructions below.

  • Seat on the driver’s side after opening the car.
  • Lock any door you exit through.
  • Turn the ignition switch with the key inside.
  • In the ignition, turn the key to the “ACC” position.
  • You should turn on all of your vehicle’s electronic equipment.
  • On the keyless entry FOB, press and hold the “Open” or “Unlock” button.
  • Hold on for around 20 seconds until the vehicle’s light flashes.

Congratulations! Your Hyundai keyless entry fob has been successfully reconfigured. Now, you should always be able to lock and unlock your car with the key. Let’s now look at how to program a new Hyundai proximity key if you misplaced the old one.

Can an old key fob be programmed to operate a different vehicle?

I was wondering whether it was feasible to reset or overwrite that key fob to my vehicle because I have a used remote control with the same button configurations (including remote start). I presently only have one remote that is set up for the automobile.

I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:

  • The key fob’s battery should be removed and then replaced (unless you put in a new battery)
  • After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
  • Turn the key to the aONa position after inserting it in the ignition.
  • The key should be in the aOFFa position.
  • Using both your hand and the remote control, lock the door after turning the key to the aONa position.
  • While simultaneously using the remote and your hand to unlock the door, turn the key to the aONa position.
  • Remove the ignition switch’s key.
  • the driver door with the key.
  • Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
  • Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
  • Put the key in the ignition switch and attempt to start the engine if the doors will lock.

After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our

Why won’t my Hyundai key fob operate?

A CR2032 battery powers the majority of Hyundai key fobs. Check to see if the battery is in contact with each connection. When your Hyundai key fob is put back together, replace any metal keys you may have removed.

How is my car key fob reset?

  • Take hold of all of your car’s remote starters.
  • Place your ignition key in and select Accessory (or press the start button once without pushing the brake pedal).
  • Your remote car starter’s Lock button should be pressed.
  • After turning it on for five seconds, turn the key back to the “off” position (or press the start button again).
  • The on-off cycle should be repeated a total of four times.
  • You’ll hear a sound (a “ding,” “ping,” or “buzz”) on cycle number four when you choose the Accessory position. Right now, programming mode is active.
  • Lock the remote by holding down the button (s).
  • Turn off the car in ten seconds.
  • Shut the door, exit the vehicle, and then try the remote.
  • If so, that’s excellent!
  • It’s time to call the dealership if it doesn’t.

Can a key fob be programmed without visiting the dealership?

Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.

How do I connect my car’s key fob to it?

Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote.

Reversing step 6 by closing the door before entering the key may help if the above method doesn’t work because some Toyotas have a different approach.

Should I reprogramme my key fob after changing the battery?

After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.

Can a key fob’s programming be lost?

There is none A key fob with a battery can lose its initial programming if you let the battery run out. This is due to the requirement that any key fob used to operate a vehicle be “paired” with it.

Are key fobs programmed by AutoZone?

With their assistance, you can match and configure your key fob to your automobile, AutoZone offers a range of key fobs that are compatible with most vehicle manufacturers. Depending on the car and the type of fob you purchase, key fobs can cost anywhere from $20 to $400.

The locks, alarm system, and even the ignition of a car can all be controlled by a key fob, often known as a remote key.

They communicate with an RFID reader device inside your car using an RFID chip and an antenna. The lock is the most typical feature that can be controlled by your key fob if the code it broadcasts matches the one the reader device is set up to accept.

Key fobs are frequently lost or broken, but changing them out is a fairly inexpensive and straightforward task.

I need help pairing my Hyundai key.

You must already have a MyHyundai account set up and the Digital Key app downloaded on your phone in order to use Hyundai Digital Key. If you’ve already completed these steps, make sure you have the Digital Key Smart Card that was provided when you bought your Hyundai vehicle on hand.

  • Go to the Digital Key app’s primary menu.
  • If your Hyundai isn’t already running, start it.
  • Press the + button to begin pairing in the Digital Key app.
  • Your Android device should be placed on the wireless charging pad.
  • Await the phone to complete pairing.

Once you begin the pairing process, this procedure will finish on its own.

  • (For Hyundai models lacking a navigation system) Choose the following choices on the instrument cluster display of your Hyundai car, in this order: Smartphone Key, Digital Key Choose, Save
  • (Applicable to Hyundai cars with navigation) Choose the following choices on the navigation screen of your Hyundai vehicle in the following order: setup, vehicle, smartphone key, digital key, pick, and save

That’s all, then! The Digital Key app for smartphones is now functionally equivalent to a Smart Key fob.

Am I able to program my own car key?

There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.

Nevertheless, it is far easier to do this than to program a second or third key:

  • Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
  • After 10 minutes and 30 seconds, switch off the light by turning the key.
  • Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
  • Thirdly, repeat the procedure.
  • To program the key, turn it back to the on position.
  • In order to test your new key, start the engine.

Why doesn’t my automobile recognize my key fob?

Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.