Find out how to change the wipers on your Hyundai Elantra. Below, pick an Elantra year. For the precise wiper blade connector on your Hyundai Elantra, we have tailored these instructions.
In This Article...
5 simple methods to change your windshield wipers on your own
- Determine the proper wiper size. You can locate
- Wiper arms should be raised until they are parallel to
- Locate the metal hook OR remove the pin from the blade.
- Slide the new blade into the arm to attach it.
- the second wiper blade in the same manner.
- You’re finished!
How big should my windshield wipers be for a Hyundai Elantra?
Size of the windshield wipers on a 2020 Hyundai Elantra The driver’s side wiper is 26 inches long, and the passenger side wiper is 16 inches long on the 2020 Hyundai Elantra.
Does the Hyundai Elantra have rear wipers?
Hold the wiper control lever as you pull it in your direction. Until the lever is released, the washers spray. When you release the lever, the wipers operate at a low speed and perform one more sweep.
How are Hyundai wiper blades installed?
Generally speaking, wiper blades should be replaced every six to twelve months or whenever you notice a difficulty with visibility. Smearing, streaking, chattering, or skipping wipers should probably be replaced or repaired.
- Other issues to watch for are:
- Clear tears, fissures, and missing parts
- Older blades that have trouble adjusting to the windscreen
- smashed frame
- metallic rust
You may either have the service staff replace or repair the wiper blades for you at your local Hyundai dealer or you can go there to get the Hyundai Parts you need. Use the methods below if you’d rather do it yourself.
NOTE: Be careful not to let the wiper arm hit the windshield; doing so could cause the glass to break or chip.
- First, make sure that your car is off.
- Step 2: Release the clip to take out the old wiper blade assembly.
- Step 3: Immediately attach the replacement wiper blade and make sure it is firmly fastened. The wiper blade should then be placed against the windshield. Continue with the other wiper blade.
- Step 4: Turn on the wiper switch inside your Hyundai to test the wiper blades.
To book service at a dealership close to you or to learn more about your vehicle’s upkeep, go to the Vehicle Health website.
How is a wiper on the passenger side replaced?
- Step 1: Purchase wiper blade refills in the correct size. The wiper blade length should be measured.
- Slide remove the old wiper blade in step two. Old windshield wipers should be removed.
- Step 3: Insert the new windshield wiper blades.
Can I change my own windshield wipers?
You simply need your hands to replace the windshield wiper blades on the majority of autos. Find the wiper blades on your automobile, then raise the wiper arms. Under spring stress, they will typically hold themselves in place, giving you space to quickly change the blades. To access the arms on some cars, you might need to lift the hood.
The next step, which you must work out independently, is how to physically remove the wiper blade from the arm. There are numerous manufacturer designs for this connection, but the majority require a little amount of fumbling and little bending to remove the wiper. For instructions on how to remove the blades from your automobile without breaking anything, we advise consulting your owner’s manual.
When you take the wipers off, drive very carefully. “I always protect the windshield with anything when I do a set of windshield wipers, whether it’s on my personal truck or a McLaren F1,” Hines says.
The metal wiper arm is prepared to make contact with the glass while the wiper blades are not in use. It could slap down and fracture the windshield if you unintentionally bump against it when you are switching out the blades. Hines claims that he “never likes to let the arm stand in the air without a wiper blade on it.” “I’ve been on the verge of tears from breaking windshields,”
We advise laying down a towel or two to serve as a barrier between the windshield and the wiper arm. In this manner, if the arm does unexpectedly swing downward, the towel will be hit rather than your priceless windshield. You definitely don’t want a fast DIY project to turn into a $300 windshield replacement.
Lay your replacement set of wipers next to the ones you just removed. Verify that both have the same size, length, and connecting points. After making sure your new wipers will fit, install them by following the same procedure you used to remove the old wipers. Put the wiper arms back onto the windshield after attaching the new wipers to each of them.
To verify sure your wipers are operating as intended, get in your car, turn on the accessories, and turn them on. Make sure they’re not contacting any area of the automobile that they shouldn’t be, such the windshield frame or cowl. Congratulations, you’re done if they’re not.
Will AutoZone swap out the wipers?
Yes! As long as you purchase your windshield wipers from the store, Autozone will replace them. Additionally, their professionals can assist you in locating the ideal wipers for your Tesla.
It’s a practical service, especially for car owners who lack the time or skill to maintain their vehicles.
A decent auto insurance plan is another way to take care of your vehicle. Jerry is always available to assist you with your auto insurance purchasing.
Have you ever completed an insurance application? Then you are aware of how awful it may be. Most likely, you didn’t have all the answers. Additionally, you weren’t motivated to comparison shop and complete additional forms once you answered the last few questions to ensure you were getting the greatest deal. All you wanted to do was finish.
Jerry can do the laborious tasks for you. Jerry gets data from your insurance provider in a matter of seconds and gives you competitive quotations.