People, it’s not impossible! However, you’ll require more than just a screwdriver. Regarding a 2004 Hyundai Accent 3 door (i.e. Hatchback) The stop light component is accessible by opening the back door. A little rectangular panel that can be snapped out with a flathead screwdriver is located directly beneath (or above, now that the door is open and it is upside down) the light casing. 4 hex bolts ought to be visible after removal. You should be able to pull the lamp case away of its mount if you remove these (a ratchet is the simplest tool to use for this). A little wriggling may be required to release the two pegs or tabs that are keeping the case in place. The 6 screws holding the casing together on the bottom must be removed once it is hanging freely. After removing them, the rear should come off, allowing access to the bulb. I bought a Sylvania Long Life number 921 replacement bulb. Slide the new bulb into place after removing the old one (which may require some effort or wriggling; take care not to shatter it). While everything is still put together, I advise testing the new bulb to make sure it works. Replace the bottom cover, the 6 screws, move the entire case back into position, replace the 4 bolts, and then snap the panel cover back into place if everything is functioning well. No more than 20 minutes should be needed to complete this process. I hope this is useful. Cheers!
In This Article...
changgong123
Hello, my 2008 Accent Hatchback’s third brake light bulb is almost dead. It appears to be an LED module. Out of the entire line, only 2 are still shimmering. Before the following inspection, I need to correct it. To replace it, my garage wanted $200 ($100 for the item). They permitted me to pass the inspection but instructed me to fix it if it is completely gone by the next year.
I tried to locate the item online, and everything is about $100. For me, it’s too much. Anyone know whether I can simply swap out the LED bulbs? Some guidelines? I search for instructions on YouTube, but I have no luck.
How can a brake light be taken off of a Hyundai Accent?
- First step: Brake Light.
- Look at the side flap of the side with the dead bulb.
- To reach the brake light, rotate the socket in a counterclockwise direction.
- To remove the dead bulb, gently downward pressure and a counterclockwise twist are used.
What is the name of the third brake light?
The Center High Mounted Stop Lamp (CHMSL) is the official name for the third brake light since the government is too serious to call it something cool like the Cyclops Light. In 1986, it was become a requirement for new vehicles, and in 1994, for light trucks.
Are brake lights replaced by AutoZone?
AutoZone will they replace brake lights? Although AutoZone doesn’t really provide brake light replacement services, our staff can help you with any inquiries you may have, aid you in locating the necessary supplies to get started, and perhaps even lend a hand.
How much does a third taillight replacement cost?
For only the parts, aftermarket third brake light bulbs may cost between $50 and $250. Pricing is influenced by a number of variables, including brand, warranty, color or finish, light source, and set inclusions. Depending on the rates in your location, labor could add an additional $25 to $75 to the final bill.
Are brake lights fixed by mechanics?
Numerous distinct flaws may be to blame for your brake lights not working. Brake light issues can have a variety of causes, from one light operating well while the other is burned out to both lights not working. A mechanic can easily and expertly replace the bulb and address any other problems.
How much does a new brake light bulb cost?
Anyone can learn how to replace a broken brake light. By changing the bulb yourself instead of going to the store and waiting for the service to be done, you can save $20 in labor costs and travel time. A replacement bulb costs about $10.
Is changing a tail light assembly difficult?
It’s simple to perform maintenance on your car by changing the tail light bulbs. We always advise consulting your service manual before you start, or if you have any queries regarding your particular car.
Are the brake lights on the Hyundai Sonata being recalled?
To find out if your vehicle is impacted by the Stop Lamp Switch Recall Campaign, enter your VIN.
Hyundai has made the decision to replace the stop lamp switches on various vehicles with model years 2007–2011 as part of a voluntary safety recall in the United States. Affected vehicles include the Accent, Elantra, Genesis Coupe, Santa Fe, Sonata, Tucson, and Veracruz. Hyundai notified the NHTSA of this action on March 29, 2013.
Is the brake light bulb the same in all cars?
It’s time to install the brake light bulb you choose after making your selection. If you’re feeling confident, you can replace the brake light bulb yourself at home on many cars because it’s not particularly difficult. Any queries you may have can be answered by your auto electrician.
Here is a step-by-step instruction manual for changing your brake light bulbs. Please remember that this is simply a general overview. Since every automobile is unique, some bulbs might not be able to be changed in this manner. We strongly advise you to consult the car manual or speak with your auto electrician if you have any questions.
Can the tail light’s plastic cover be replaced?
It only takes an hour to change a tail light cover, which is a reasonably simple procedure. Since the majority of coverings are made to last the lifetime of the car, you could never even require this service. That tail light cover won’t need to be replaced until it sustains damage, such as from an accident, UV rays, or harsh chemicals.
The bulbs in brake lights all the same?
While the brake lights only activate when the brake pedal is pushed, the tail lights turn on instantly when the driver turns on the headlights. Even though both lights are red, brake lights often have a red light that is significantly brighter.
Depending on the type of vehicle. Dual-filament bulbs are used in many automobiles to combine the brake and tail lights into one. Here, every filament is connected to a different circuit. The thicker filament, which provides a brighter light, is utilized for brake lights, while the thinner filament illuminates as a tail light. While in certain automobiles, the brake and taillights are lit by independent lightbulbs.
Let’s look at what those lights are and what they function in order to better comprehend the distinctions between the brake light and the tail light.
Can I replace my own tail light?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
What does the Hyundai automobile with the key light mean?
If this light is solid, the immobilizer in your key has been recognized by your car, allowing you to start the engine. If this light is blinking, the immobilizer system isn’t working properly, and you should take your car to the nearby Hyundai repair center. Ignitor Light for the Immobilizer (With Smart Key)
What does “check high mounted brake light” on your car mean?
These lights represent various potential problems with your braking system. Because every car is unique, yours can have a different brake warning indicator than these. To be confident which light applies to your individual car, consult the Owner’s Manual.
*Note: Although your car’s ABS Warning Lights are specifically tied to the Anti-Lock Brake System, they can occasionally be connected to the hydraulic braking system.