In This Article...
sbr711
Remove the two screws from underneath the trunk; one is silver and the other is gold in color. To access the screw, pull the hole cover from one side. Disconnect the connector.
Enter the cabin and begin to remove the light. Once it is raised enough for you to reach in and twist the socket’s wings to release it from the lamp housing, dump the bulb and socket out of the way and continue removing the lamp housing.
Replace the bulb by grabbing the socket by the short pigtail. Cut the wings off at the base of the socket with a set of side cutters.
Put the bulb and socket back into the housing and reinstall the lamp assembly on the deck panel.
A word of advice: use caution when removing the lamp’s socket. A coworker who was removing it accidentally cut his fingers rather badly.
Overview
Quick Brake. The Hyundai Sonata’s factory-installed incandescent third brake light bulb glows briefly before turning on. In addition to giving the vehicle a contemporary LED appearance, a modern LED upgrade offers rapid reaction, which helps warn other drivers on the road early. This third brake light LED is a fantastic improvement in terms of both looks and utility.
Choose the Quantity. We have listed bulbs separately here since different trim levels frequently have distinct third brake lights. Please confirm your Sonata’s specifications and choose the number of bulbs you’ll need to replace all of them.
Correct Shade. You’ll see that the only color choice we provide is red, in accordance with SAE/”red” DOT’s specifications. The third brake light’s red lens serves as a filter, allowing only red light to pass through, hence this produces the maximum output through it.
Why do my Hyundai Sonata’s brake lights not function?
The mechanic will bring a multimeter while inspecting the electric parts of your car, particularly the fuses and relays, to help them identify which particular part has failed. The mechanic will start by looking at the rear of the vehicle for any obvious damage, such as frayed or loose wiring and damaged tail light covers. The mechanic will next start to look at each component along the electrical circuit if there isn’t any obvious damage.
By checking at the fuses, the mechanic will start examining the various electrical parts of the car. He or she will take out the appropriate fuse for the tail lights to check if it is blown if they suspect a blown fuse. In such case, the mechanic will swap it out for a fuse that is properly rated for the amperage.
The mechanic should determine whether the unlit bulb is burned out if only one of the tail lights appears to be out. Bulb failure and replacement are inevitable over time. The mechanic will examine the unlit bulb’s filament to see if it is broken. In that case, a new bulb will be installed in lieu of the damaged one.
The mechanic will then examine the matching relay for the tail lights if it appears that the bulbs and fuses are in good operating order. The mechanic can measure the relay’s resistance using a multimeter. The mechanic will replace it and rewire it to the current connections if it is not operating properly.
The brake light switch should be checked by the mechanic if the tail lights appear to be operating OK but the brake lights are not. The mechanic will replace the old switch with a new one if the brake light switch is not reacting to the brake pedal. After that, the mechanic should ensure sure the brake lights are operational and responding to the new switch.
Any time a repair is required, the technician will see to it that all required work is done and that the new components work properly. A code reader/scanner will be used by the repair to erase any error codes that may have been set off by problems with the taillights.
What does the Hyundai Sonata’s brake light signify?
The brake warning light is a major matter. When you see it turn on, ensure sure your emergency brake is not engaged, then halt your vehicle as soon as you can. Your brakes could not operate at all if you have insufficient brake fluid.
Why won’t the brake lights on my 2012 Hyundai Sonata turn off?
Due to a problem with the brake pedal assembly that, in certain cases, prevents the brake lights from turning off, Hyundai is recalling 304,900 Sonata cars from the 2011 and 2012 model years.
The brake pedal stopper pad, which can eventually wear down and allow the brake light switch to stay on after the driver lifts their foot from the brake pedal, is at problem. In these circumstances, the Sonata is capable of continuing to drive while the brake lights are illuminated in the “braking” position, which can give other motorists the wrong impression. Additionally, this issue can make it possible to shift out of park without depressing the brake pedal. Even while Hyundai reports that the second issue hasn’t resulted in any accidents, it is this second issue that is more concerning.
The Hyundai Sonata automobiles produced from December 11, 2009, to June 30, 2011, are subject to the recall campaign.
On January 11, Hyundai will begin the recall procedure, and dealers will apply the fix. Owners may bring their cars in to have this problem addressed at no charge; the fix simply entails installing a new stopper pad.
Owners should reach Hyundai customer service directly at 1-855-671-3059 and reference recall number 136 prior to the start of the recall. They can also visit the National Highway Traffic Safety Administration (NHTSA) website at www.safercar.gov or dial the vehicle safety hotline at 1-888-327-4236.
Ramey, Jay
For his own personal use, Jay Ramey has been drawn to the more adventurous end of the reliability spectrum because he spent his childhood around really unusual European cars.
How can the parking brake be disengaged on a Hyundai Sonata?
I unintentionally activated my parking brake, and I’m unable to turn it off at the moment. How does a 2020 Hyundai Sonata’s emergency brake work?
In less than two minutes, find out if your auto insurance is being overcharged.
The electronic parking brake (EPB) is located in the buttons right below the vent to the left of the steering wheel on the 2020 Hyundai Sonata.
As soon as the engine is turned on, press and hold the brake pedal while holding down the EPB switch to release the parking brake. Your dashboard’s parking brake warning light ought to turn off.
If the EPB light continues to illuminate after it ought to have been turned off, there might be a brake system fault, which could be a significant safety risk. In this situation, you should refrain from driving and seek immediate assistance from a professional.
Is it time to put the breaks on your current auto insurance policy or does it provide you with the protection your 2020 Hyundai Sonata deserves? Jerry has got you covered if you’re seeking for a more effective approach to shop for auto insurance.
Shopping for auto insurance is more efficient and simple than ever with Jerry. Simply respond to a few brief questions, and Jerry will present you with a collection of customised quotations from the best auto insurance companies. You can then choose the appropriate level of coverage at the appropriate cost.
Starting up with Jerry takes less than a minute, and the typical user saves $887 annually on auto insurance!
How is a brake light fixed?
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat on the other side in step 6
Why doesn’t my third brake light function?
Sometimes the issue is more complicated than just a blown fuse. Even if the fuse is working properly, the electrical system could still have a short circuit. There is a fault in the brake light circuit if you replace the fuse and it blows again right away. This typically indicates that the insulation on the brake light wiring harness has been worn through by the car body or frame. The fuse blows when the naked wire comes into touch with the body or frame. Finding these can be difficult, but fixing them is simple. It might be preferable to take your automobile to a shop and let the experts fix it if you can’t find the short.
What is the name of the third brake light?
The Center High Mounted Stop Lamp (CHMSL) is the official name for the third brake light since the government is too serious to call it something cool like the Cyclops Light. In 1986, it was become a requirement for new vehicles, and in 1994, for light trucks.
Are the brake lights on the Hyundai Sonata being recalled?
To find out if your vehicle is impacted by the Stop Lamp Switch Recall Campaign, enter your VIN.
Hyundai has made the decision to replace the stop lamp switches on various vehicles with model years 2007–2011 as part of a voluntary safety recall in the United States. Affected vehicles include the Accent, Elantra, Genesis Coupe, Santa Fe, Sonata, Tucson, and Veracruz. Hyundai notified the NHTSA of this action on March 29, 2013.
If the brake switch is damaged, will the third brake light function?
The brake-light switch may be ruled out if the lower lights don’t turn on and only the third brake light functions. Test the emergency flashers once more to look for wiring, socket, and lamp issues. Because some vehicles employ distinct circuits for the lower and third brake lights, if the flashers function, look for blown fuses.
A faulty turn-signal switch may prevent the lower brake lights from functioning on vehicles that use the same lights for both brakes and turn signals. The third-light should still work even if the turn-signal switch is malfunctioning. The turn signals and brakes on this type of system share the same circuit. The brake light signal is cancelled on the side selected when we activate the turn signal switch. The lights would continue to be on and not flash if it didn’t. The brake light circuit may be improperly interrupted by a malfunctioning turn-signal switch. The lower brake lights might not function as a result of a broken wire going to or coming from the switch. When turning, the third brake light does not flash. This is why a malfunctioning turn signal switch won’t have an impact.
AutoZone does it replace brake lights?
AutoZone will they replace brake lights? Although AutoZone doesn’t really provide brake light replacement services, our staff can help you with any inquiries you may have, aid you in locating the necessary supplies to get started, and perhaps even lend a hand.
Are brake lights fixed by mechanics?
Numerous distinct flaws may be to blame for your brake lights not working. Brake light issues can have a variety of causes, from one light operating well while the other is burned out to both lights not working. A mechanic can easily and expertly replace the bulb and address any other problems.
How does an ESC on a Hyundai Sonata turn on?
ESC is turned on. To turn off ESC, press the ESC OFF button for at least a half-second after turning the ignition ON. (The ESC OFF indicator will turn on.) Press the ESC OFF button to activate the ESC (ESC OFF indicator light will go off). A faint ticking sound may be audible upon starting the engine.