How To Replace Starter On 2004 Hyundai Santa Fe?

The starter motor is located at the bottom of the engine and gearbox cases, above the crank case, where it is mounted. This motor is accessible from the bottom.

How long does a Hyundai Santa Fe starter last?

How Frequently Should Starters Be Replaced? The typical lifespan of a car starter motor is between 100,000 and 150,000 miles.

How much does a Santa Fe starter set you back?

Estimated cost to replace the starter on a Hyundai Santa Fe. A Hyundai Santa Fe starter replacement typically costs between $412 and $501. Between $76 and $96 is the expected cost of labor, while between $336 and $405 is the estimated cost of parts.

How challenging is it to change a starter?

Are you concerned that the strange grinding sounds coming from your car may be the result of a worn-out starter? Your suspicions might be true after all. You must now replace your starter as soon as possible to avoid harming the engine flywheel. But you might be wondering how long it takes to replace a starter because of your busy schedule.

A starting motor replacement typically takes two to four hours. It accounts for the time needed to swap out the starter and remove the old one. Depending on the type and model of the car, the actual time will change. Access to the starter is more convenient in some cars than others.

But is replacing your starter your only option, or can you also try to fix it? Let’s first learn how a starter functions before we respond to that question in more detail later on in the essay.

A Hyundai Sonata starter costs how much?

Estimated cost to replace the starter on a Hyundai Sonata. Hyundai Sonata starter replacement typically costs between $397 and $517. The cost of labor is expected to be between $86 and $109, while the cost of parts is between $311 and $409.

Can I change the starter on my own?

The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:

  • In order to disconnect the negative battery cable from the battery, turn off the ignition.
  • From the starter, unplug the positive cable—the substantial cable that connects to the battery.
  • Using a ratchet, unplug each of the bolts holding the starter to the block.
  • Any additional mounting brackets keeping the starter in place should be removed.
  • The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
  • Take the starter out of the vehicle.
  • The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.

How can my starter be checked?

On the driver’s side of the engine, right below the left bank of cylinders, is where you’ll find your starter. It is secured to the mounting plate it is attached to with a few fasteners. Additionally, two wires must to be connected to it. This might be a challenging task to do depending on your ability and access to the proper tools. I advise having a YourMechanic professional visit your area to examine and replace your starter.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our

Without a starter, how do you start a car?

Restart Your Vehicle Giving the starter enough amps will enable it to operate normally, which will cause the engine to start. You can either utilize the battery and jumper cables from another vehicle or a portable jump starter to jump-start a vehicle.

When I stop, why does my Hyundai Santa Fe shut off?

To increase fuel efficiency and lower exhaust gas emissions, the Idle Stop and Go (ISG) system automatically and momentarily shuts down the engine when the vehicle is stopped and idling.

How can I reset the immobilizer on my Hyundai?

The keys to Hyundai vehicles have a microchip that occasionally loses synchronization (the key warning light will blink).

If you have one, a spare key.

2. If that doesn’t work, try unplugging the battery’s ground lead for five minutes. This should reset the immobilizer module.

3. To disable the immobilizer, you can enter the limp home password on the metal tag that comes with the keys by using the ignition key. See manual illustration.

How much should installing a starter cost?

A starter’s component rebuild could cost anything from $50 to $350. The price of a new starter can range from $80 to $350. A skilled mechanic will cost you between $150 and more than $1,100 to replace or rebuild your starter.

How can you know if your starter or alternator is the problem?

  • The Symptom: Lights that flicker and dim. The Alternator Is Probably at Fault.
  • Dash lights come on as the symptom, but the car won’t start. The Most Likely Offender: Starter.
  • The Symptom: The Jump Start Is Ineffective

Where can I find a starter?

The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.

Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.

A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.

What is the turnaround time for starter motor replacement?

What is the turnaround time for starter motor replacement? Its replacement should take between two and four hours. Because some starter motors are difficult to access, the process can take longer and cost more overall.

What symptoms indicate a bad starter?

  • #1: The Engine Won’t Start.
  • #2: Loud, grinding, or whirring noise.
  • #3: Occasional Trouble Starting the Car.
  • #4: The Starter Continues After the Start.
  • #5: Smoke.
  • #6: The starter engages but the engine won’t turn over.
  • Seven: Battery

What amount of time does it take to remove a starter?

They just informed me that my starter needs to be replaced while I’m in the repair shop for some routine maintenance. How long does it take to replace a starter, please?

In less than two minutes, find out if your auto insurance is being overcharged.

Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.

Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If that’s the case, a 4 hour time frame would likely be preferable to a 2 hour one.

Download the Jerry app to see if you’re overpaying for auto insurance while you’re waiting for the mechanic to complete. We warrant that replacing your starter will be much quicker!

Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest offer, they all produce competitive estimates from leading insurance companies. When a customer shops with Jerry, they often save over $800!

Why won’t my Hyundai key turn?

If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.

Why does starting something by tapping it work?

This works because as the brushes deteriorate, an insufficient electrical contact results. The brushes are knocked back into position so they may make contact once more by lightly pounding the starter’s back with a hammer.