You must first determine the cause if your taillights are not working. Perhaps you’ve noticed that the taillights on your Hyundai Sonata stopped working overnight or that the lights on your Hyundai Elantra appear dim. Fortunately, determining the cause is frequently rather simple.
The most frequent reason for faulty tail lights is a burned-out bulb. Start with this solution because it is the cheapest and simplest.
You might be dealing with a fuse or wiring issue if both tail lights have stopped working or if your turn signals are also impacted.
If none of these seem to apply, you can bring your Hyundai in for a professional assessment.
Once you have gathered all of your supplies, take the following actions:
Cut the battery off. Unless the battery is unplugged, working with electrical systems always includes the risk of shock.
The tail light assembly is accessible. To access the tail light assembly on the majority of Hyundai vehicles, you must open the trunk and take off the lid.
The electrical cable must then be disconnected, and the assembly’s three 10mm nuts must be taken out if you have an Elantra. You won’t need to do this to remove the assembly if you have a Sonata.
Turn the bulb socket to the left, or counterclockwise, to remove it. You can all hear a click in an Elantra.
Replace the defective bulb with a new one. Wearing gloves is a good idea due to the glass’ susceptibility to grease and smearing. Handle delicately to prevent breaking!
The most common cause of Hyundai tail lights not working is faulty bulbs, but if you have a broken tail light assembly, you must replace the entire thing. Access it as described above, undo all of the fasteners to remove it, and then swap it out for a new one.
Key Learnings You can quickly change the bulb at home if the Hyundai tail lights aren’t working. A
In This Article...
How is the tail light assembly changed?
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat on the other side in step 6
How is a tail light assembly taken out?
Find the rear of the tail light assembly by opening the trunk of your car. The electrical harness should be disconnected from the tail light assembly’s back. Remove any nuts or screws holding the tail light assembly in place. the rear tail light assembly out by pushing it.
How much does a new tail light assembly cost?
Cost of replacing a tail light Expect to pay between $200 and $500 if you elect to have a professional replace your tail light assembly. If you own a high-end luxury or performance vehicle, the cost of the repair may increase.
Can the plastic on a tail light be replaced separately?
Hello, and thank you for your letter. The “lenses” or plastic coverings for the taillights are not offered for sale individually. If you wish to do that repair, you will have to buy the full taillight assembly. Now, keep in mind that you might be able to locate one used for a lot less money. In light of this, you should make sure any used parts are either inspected or are of “known good” quality. Junk yards, pull-and-pay shops (where you find and take the part on your own), and even online are common venues to find used units. Make an appointment at your home or place of business with our service department if you require help changing the taillight.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
What’s included in a tail light assembly?
The group of lights positioned on the back of your car is known as the tail light assembly. They are made up of the reverse lights, brake lights, and tail lights. Each set of lights has a specific function for nighttime conspicuity. The red tail lights are connected to switch on in conjunction with the activation of the front position lighting. When the driver applies the brakes, the brake lights turn on. On both sides of the car, these lights, which are a vivid red, are mounted in multiples of two.
In some vehicles, the brake lights and the tail lights can be merged. They can be placed as a dual-intensity bulb in these circumstances, with the brake-light having a brighter intensity. Fog lights are also used in cars to improve rear sight in heavily foggy conditions. When the driver shifts into reverse to back up the automobile, the reversing lamps turn on. For both your safety and the protection of other drivers, you must make sure the tail lights are in functioning order.
You should replace the tail light assembly if your tail lights have sustained external damage or if the lenses are dim. For every make and model of vehicle, Buy Auto Parts keeps a large selection of tail light assemblies in stock.
We offer excellent aftermarket components as well as original OEM replacements. All of our auto components are rigorously examined and backed by a warranty. Choose the correct year, make, and model of your car from our online catalog to view the components that fit it. You can purchase premium tail light assemblies at Buy Auto Parts for unbeatable pricing, plus free shipping. Contact us by email at [email protected] or over the phone at 1-888-907-7225 if you have any inquiries about our auto parts.
The tail light can AutoZone replace?
AutoZone will they replace brake lights? Although AutoZone doesn’t really provide brake light replacement services, our staff can help you with any inquiries you may have, aid you in locating the necessary supplies to get started, and perhaps even lend a hand.
How can I fix a broken tail light cover?
Craft glue might work if your tail light cover simply has a crack in it. However, if the damage is more significant, you should use some lens repair tape to cover the exposed region. This is available at most auto parts retailers, including this dealership.
Can I replace my own tail light?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
Why do my Hyundai Sonata’s brake lights not function?
The mechanic will bring a multimeter while inspecting the electric parts of your car, particularly the fuses and relays, to help them identify which particular part has failed. The mechanic will start by looking at the rear of the vehicle for any obvious damage, such as frayed or loose wiring and damaged tail light covers. The mechanic will next start to look at each component along the electrical circuit if there isn’t any obvious damage.
By checking at the fuses, the mechanic will start examining the various electrical parts of the car. He or she will take out the appropriate fuse for the tail lights to check if it is blown if they suspect a blown fuse. In such case, the mechanic will swap it out for a fuse that is properly rated for the amperage.
The mechanic should determine whether the unlit bulb is burned out if only one of the tail lights appears to be out. Bulb failure and replacement are inevitable over time. The mechanic will examine the unlit bulb’s filament to see if it is broken. In that case, a new bulb will be installed in lieu of the damaged one.
The mechanic will then examine the matching relay for the tail lights if it appears that the bulbs and fuses are in good operating order. The mechanic can measure the relay’s resistance using a multimeter. The mechanic will replace it and rewire it to the current connections if it is not operating properly.
The brake light switch should be checked by the mechanic if the tail lights appear to be operating OK but the brake lights are not. The mechanic will replace the old switch with a new one if the brake light switch is not reacting to the brake pedal. After that, the mechanic should ensure sure the brake lights are operational and responding to the new switch.
Any time a repair is required, the technician will see to it that all required work is done and that the new components work properly. A code reader/scanner will be used by the repair to erase any error codes that may have been set off by problems with the taillights.
Are the brake lights on the Hyundai Sonata being recalled?
To find out if your vehicle is impacted by the Stop Lamp Switch Recall Campaign, enter your VIN.
Hyundai has made the decision to replace the stop lamp switches on various vehicles with model years 2007–2011 as part of a voluntary safety recall in the United States. Affected vehicles include the Accent, Elantra, Genesis Coupe, Santa Fe, Sonata, Tucson, and Veracruz. Hyundai notified the NHTSA of this action on March 29, 2013.
Are brake and tail lights interchangeable?
The primary distinction between brake lights and tail lights is that the latter only come on when the brake pedal is depressed, whereas the former illuminates as soon as the headlights are turned on. Although both lights are red, brake lights often provide a more vivid red light.
Insurance coverage for damaged tail lights?
“Normally, your insurance provider would pay for a broken tail light if you had collision insurance. But you’d still be in charge of covering your deductible.
O’Reilly modifies the tail lights?
While you wait, at no additional cost to you, our parts specialists can swiftly and easily change wiper blades because they are experts at changing headlamp and taillight bulbs.
What model year of Hyundai Sonata is being recalled?
The recall number for Hyundai is 207. Hyundai Motor America (Hyundai) is recalling a certain number of Santa Fe and Sonata models with 2.5L turbocharged engines from the model years 2021–2022. The pipe connection between the high-pressure fuel pump and fuel rail may leak fuel.
How many Hyundai Sonata recalls have there been?
There have been 56 Sonata recalls. The most campaigns have been associated with the 2011 model year. Recalls are free fixes ordered by Hyundai itself or the National Highway Traffic Safety Administration in response to a serious safety issue.
What causes the recall of Hyundai Sonatas?
As a result of fuel lines that might leak into the engine compartment and start fires, Hyundai is recalling more than 215,000 midsize cars in the United States, most of them for the second time.
FILE – On Sunday, September 12, 2021, at a Hyundai dealership in Littleton, Colorado, the Hyundai emblem can be seen reflecting off the grille of an unsold car. On May 11, 2022, Hyundai will recall more than 215,000 midsize cars in the United States, most of them a second time, due to the risk of fires started by gasoline hose leaks in the engine compartment. A large number of the affected 2013 and 2014 Sonata cars were recalled in 2020 due to the same issue. David Zalubowski/AP Photo, File)
DEARBORN — As a result of fuel lines that might leak into the engine compartment and start fires, Hyundai is recalling more than 215,000 midsize cars in the U.S., most of them for a second time.
A large number of the affected 2013 and 2014 Sonata cars were recalled in 2020 due to the same issue.
In documents made public by American safety inspectors on Wednesday, the Korean manufacturer claims that the heat from the engine can cause a low pressure gasoline tube to shatter over time. That could result in fuel leaks and raise the possibility of a fire.
Dealers examined the hoses as part of the 2020 recall and replaced them if necessary. Otherwise, heat-resistant tape was put in place. This time, all defective hoses will be changed.
Documents from Hyundai claim that 138 reports of issues have been made in the US, but there have been no confirmed collisions, fires, or casualties.
The latest recall follows a flurry of investigations into engine compartment fires that have plagued Hyundai and affiliated automaker Kia by the U.S. National Highway Traffic Safety Administration.
In December, the organization combined two 2017 investigations into a brand-new engineering examination that covered more than 3 million automobiles from the model years 2011 through 2016. At that time, the NHTSA had gotten 161 reports of engine fires, some of which had happened in recalled cars.