How much does it cost to replace a headlight bulb?
Hyundai Sonata headlight bulb replacements typically cost $109, which includes $14 for parts and $95 for labor. Prices may change based on where you are.
In This Article...
How do the fog lights on a Hyundai Sonata turn off?
After turning on the headlights, the fog lights will come on when fog light switch (1) is switched to the ON position. Turn the switch to OFF to turn off the fog lights. The fog lights use a lot of the vehicle’s electrical power when they’re on.
Can I change the headlight bulb on my own?
Without touching the bulb’s glass, carefully screw in the new bulb. If you do, the oil and grime on your hands could cause the bulb to burst once it heats up. Your car’s hood should be closed. Your headlights ought to work perfectly again after installing the new bulb, allowing you to enjoy driving your automobile day or night.
Most of the time, changing a headlight is simple and doesn’t need sending your car to the shop. See what other do-it-yourself auto maintenance tasks are available.
What does it cost to replace a headlight bulb?
The majority of fatal auto accidents, according to the National Highway Traffic Safety Administration (NHTSA), take place after dark. It’s crucial to have functioning headlights if you want to keep your family and yourself safe when driving.
Fortunately, repairing your headlights is among the least expensive car repairs you’ll need to make.
A mechanic’s headlight bulb replacement typically costs between $100 and $130. The cost of doing the work yourself will be significantly influenced by the brand, model, and kind of bulb used in your car.
How do I choose the right headlight bulb?
For information on bulb fittings, you can either get in touch with the company that makes your car or just check your owner’s manual, which should list all the fittings your car needs for each kind of light.
Will AutoZone replace the bulb in my headlights?
On the AutoZone website, I was able to find the replacement for my broken right headlight bulb. I was going to go there tomorrow to buy a new bulb, but I don’t think I can put it in myself, and I’m not sure if I should make an appointment with a mechanic. Does Autozone perform headlight bulb replacements for you?
In less than two minutes, find out if your auto insurance is being overcharged.
AutoZone can assist you in replacing a burned-out headlight bulb, but only if you bought the replacement bulb from their store and only if the procedure doesn’t involve disassembling the car.
While knowledgeable AutoZone staff members can assist you with a straightforward replacement, the store is not a substitute for a qualified mechanic. They won’t take apart or remove any of your car’s parts to service it.
Not all AutoZones will change your headlight for you, to add to that. You shouldn’t rely on your neighborhood AutoZone to assist you service your automobile because different locations may have different policies. Of course, you may always show up and inquire, but just to be on the safe side, you should probably schedule a repair appointment.
Jerry will automatically produce personalised quotations from more than 55+ top name-brand insurance carriers when you download the app and answer a few questions.
From the app, you can shop and compare prices, manage your policy, and even switch policies! Jerry handles everything, including getting in touch with your insurance, buying your new coverage, and dealing with the tedious paperwork.
Is it challenging to switch headlights?
Even if you have the most expensive wheels, if your headlights aren’t working, it won’t mean much (and as we know from numerous movies and cop shows, a burned-out light will lead to an unwelcome stop by a highway patrol car). Thankfully, changing a headlight bulb is a rather simple procedure.
Tools required:
- brand-new light bulb(s) Make sure you purchase the appropriate bulb type for your car (your local auto parts store should be able to match a bulb with your make and model)
- alcohol-based tissues and wipes (to clean and hold the new bulb)
- tool for Phillips screws
Instead of from the front of the automobile, you’ll access your headlight bulb via the engine compartment. Locate the headlight close to the front of the car by opening the hood. It will be housed in a bulb holder and connected to the bulb by a power connector, which typically has three wires.
Depending on your vehicle, the power cables are connected to a plug at the base of the headlamp and secured by a plastic catch, a metal clip, or a screw cap. Push down on the little lever at the top of the plastic catch as you take the plug out. Hold onto the metal clip as you draw it up and away if you’re dealing with one. When working with a screw cap, turn it counter-clockwise to unscrew it.
Holding onto the base of the old bulb, you should be able to remove the back of the headlight holder after the wires have been severed. In some circumstances, you might need to slightly spin the bulb to release it.
Use tissues or gloves to handle the replacement bulb; you don’t want your skin’s oils to get on it. Before you install it, you should give it a thorough cleaning with an alcohol wipe. When the bulb is prepared, insert it into the plug’s base. No rubber gasket will be seen if it has been placed properly. The headlight holder and power wires can be plugged back in when the bulb has been installed. Make sure to switch on your headlights to test the bulb.
Working with your headlights differs slightly from changing your rear tail lights, which include your brake lights. On some models, you may unscrew the housing that houses the bulb from the outside, while on other models, you have to do so from inside the trunk. To access the bulb after unscrewing the housing, you might need to work with tabs, screws, or tiny knobs on the tail light cover (make sure not to lose the screws if you need to remove them). The electrical wiring won’t need to be taken out, but be careful not to pull the housing out too much lest you rip the wires.
The bulb should be easy to remove by either pulling it out straight (as in most contemporary cars) or by pushing it in while simultaneously unscrewing. Replace the housing and reattach it when the replacement bulb has been installed (screws, tabs, knobs, etc.). Once more, be careful to test the bulb by turning the ignition on and using the brakes.
Should I actually swap out both headlights?
The solution is that replacing both bulbs is not necessary. However, there are several benefits to having a skilled Ace Auto Parts mechanic replace both lights at once. You don’t want both headlamps to go out, which is the main justification for replacing all of the headlights at once.
Can my automobile be operated with only one headlight?
It’s likely that an officer will stop you if you’re driving about in a car with only one functional headlight. This holds true even if you are driving your automobile while the road is illuminated by two functional parking lights. A citation may be issued to you if you break the law.
If it’s raining and your windshield wipers are on, the only time an officer couldn’t pull you stop for a headlight violation is if it’s not safe to do so. This constitutes a secondary crime. Only if you are pulled over for another traffic infraction, such failing to stop when a traffic light is red, may you receive a ticket for this one.
It’s a minor infraction to drive without both of your headlights functioning. For this category of violation, there is no jail time; however, you could be subject to a $150 fine.
Can I use LED headlight bulbs?
Since I was a child, I’ve been interested in vehicles and bikes. I don’t know that I enjoy getting my hands dirty, yet I do it constantly.
All automobiles that are equipped with halogen headlights can be converted to LEDs.
The principal benefit is a significant increase in street illumination and hence better nighttime driving safety. The package I utilized includes CREE LED lights with a 3,200 lumen output. Factory halogen lights typically produce only 1,000 lumens.