The battery in your Hyundai key fob is simple to change. A replacement CR 2032 3V battery is all that is required. They typically cost between $3 and $5 for a pack of 5. Wearing latex gloves is advised because you will be contacting a motherboard during this process, which could result in unintended harm.
- Remove the emergency key from the fob’s base.
- Between the release button and the key slot, insert the key.
- Turn the key until the fob pops open as if you were unlocking a door.
- Open the fob while facing the buttons downward (otherwise they will fall out).
- Remove the barrier and motherboard, then set aside the button-side of the fob.
- Remove the dead battery from its mount using the key.
- Place the + side of the new battery in its bracket.
- Replace the fob’s button-half, motherboard, and barrier.
- Set the release button peg in the appropriate hole.
- Reassemble the fob with a snap.
You’re done now! Press any button to put your Hyundai Smart Key to the test. If all was done correctly, a tiny red light should flash over the unlock button.
In This Article...
What sort of battery is required for a Hyundai key fob?
A CR2032 battery powers the majority of Hyundai key fobs. Once you have a new Hyundai key fob replacement battery in your possession, insert it into your key fob exactly where the old one was. Check to see if the battery is in contact with each connection.
I can’t get my Hyundai key fob to open.
You must first depress the metal button or tab to release the actual key before you can open the key fob on a Hyundai. The fob will then pop open once you insert the key into the hole and move it around. Despite being somewhat high-tech, your key fob is robust.
How much does a new Hyundai key fob cost?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
Why won’t my key fob operate now that the battery has been changed?
The most typical fix for a broken key fob is a battery replacement. However, replacing the batteries may not always be the best course of action. Therefore, your key fob might not operate even after a battery change for various reasons.
Handling the key fob circuit carefully is the first step in fixing the issue. Do not use your bare hands to contact the key fob circuit if you are not familiar with handling electronics. Call a professional right away to quickly diagnose and resolve the issue.
The following are additional causes for the key FOB’s malfunction:
Over time, a car remote’s button will inevitably wear out. When the button is depressed, the contacts notify the circuit board to carry out commands. The contacts may become separated from the buttons as they deteriorate. Pressing the buttons repeatedly is one of the greatest techniques to identify worn-out car buttons on car remotes.
Determine which of the following circumstances applies:
- Only certain button presses, or all button presses, function.
- One button operates while the other does not.
There is a problem with the automobile remote if the plastic that covers the key fob has also cracked. Open the key fob using basic tools, then inspect it for damaged contacts or crooked buttons. In the event that doesn’t work, get a new automobile key fob.
Your car remote might not function after changing the battery for another cause, which is the lock. Look for these indications to determine whether the lock or auto door has become faulty.
- Manual or key operation of the lock does not cause it to unlock or lock.
- Some door locks can be opened remotely, but not all.
- Without the doors opening, a signal has been transmitted, as indicated by the indicator light flashing.
- Door lock operates partially or not at all.
The automobile key may become damaged as a result of things like water, scratches, etc. The key fob may be damaged if it stops functioning right away after being trodden on, submerged in water, or opened. Other indicators to look out for include:
- Whether a backup key functions
- The buttons are stationary.
- The Key is clearly damaged.
A damaged key can be replaced with a new car key. The key fob can be reprogrammed with assistance from the Colorado Springs Locksmith specialists.
There is a good likelihood that the battery change reset a car remote. When certain buttons are pressed, the key fob can also be reset. Therefore, the failure of many key fobs is a good indication that the automobile key remote has been reset. There are two indicators to watch out for:
- No spare remotes operate.
- car remote completely quits functioning
After changing the battery, does the key fob need to be reprogrammed?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
How is the Hyundai Smart Key pry opened?
The case ought to open easily. In order to start, look for a little notch or imprint down the side of your key fob if you drive an older Hyundai car. Then, spin the key fob in either way with a coin or flat-bladed screwdriver to gently pry it open from the notch.
What occurs when the battery in your key fob runs low?
The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. When a smart key fob is in your pocket or handbag for automobiles with push-button starts, the car might not always detect it if the battery is low.
The best way to start a car without a key
Remove the electronics from the plastic cover that is located underneath the steering wheel. Then, pound or drill a screwdriver into the ignition flaps until it is firmly in place. The screwdriver should then be turned in the same way as an automobile key. This will begin the vehicle.
Can I set up a key fob on my own?
Yes, a replacement automobile key can be obtained without the original. Since people frequently misplace their car keys, replacing a misplaced car key is an easy operation. Nevertheless, depending on the key type, it could be pricey.
A key fob is a little electronic gadget that you can use to remotely lock and unlock your car. Other capabilities of the fob could include a remote engine starter, a trunk opening, or a proximity system that allows you to open your car without taking the fob out of your pocket.
Depending on how sophisticated the key technology is, replacing car keys can be expensive. An old metal key can be duplicated for less than $10 at a hardware store. On the other hand, the most recent smart keys must be ordered from a dealer and might cost between $200 and $500.
Your car key’s battery can be changed easily by opening it up, identifying the battery type, and going to the store. If you’re unsure of how to open the remote, it pays to consult your owner’s manual because you don’t want to force anything open and break it.
Today’s automobile keys are more secure and capable thanks to technology, but the gain isn’t free. The majority of modern keys feature complex electronic parts that must be configured before usage.
You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.
You might be able to program a replacement yourself, depending on the make and type of your vehicle. The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The catch is that in order to complete the process quickly or at all, you might need two functional key fobs.
It’s wise to acquire and program a backup remote before you require it. Additionally, a lot of used-car buyers (particularly auto dealers) will pay more for a vehicle with at least two functional key fobs or sets of keys.
A misplaced automobile key can indeed be replaced by a locksmith. If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.