These figures will change depending on the automobile model, the cost of labor, and the auto parts that need to be repaired or replaced. An alternator replacement takes around 2 hours, which is slightly less time than a clutch repair but roughly the same as a driveline repair.
The anticipated cost of parts, which includes a new belt, might be between $290 and $600. Labor might cost anything from $85 to $800, depending on where you get your car serviced.
If a new alternator is too expensive, you might alternatively ask your repair for a refurbished or rebuilt alternator. Make sure your products are covered by a guarantee to prevent future issues.
In This Article...
Services for Alternator Repair
A Hyundai Entourage alternator repair typically costs $305, which includes $210 for components and $95 for labor. Prices may change based on where you are.
How is a step-by-step alternator replacement performed?
Every job has a difficult section, and removing the belt from the pulley is the difficult section for replacing an alternator. Your vehicle has a tensioner pulley somewhere on it. It must be moved far enough for the belt to come off the pulley. We had to use a tool to draw back the typical spring-loaded GM tensioner on our 1995 GMC. Some vehicles include rod-end or screw-type tensioners, which work by applying pressure as a bolt is turned through threads to change the length of a rod. To remove the belt in this situation, simply crank the bolt or rod end with a wrench or socket until the strain is released.
In our situation, we seized a Craftsman 17mm Cross Force wrench and applied considerable pressure. That would typically be a horrible experience, but the Cross Force was created specifically for such a scenario. The Cross Force wrenches have a 90-degree twist in the centre, which causes you to push on a flat surface. So we could use more force without feeling uncomfortable. We simply fought it till the belt freed itself.
A 2007 Chevy Cobalt’s alternator can be found where?
On the front passenger-side of the engine of your Chevy Cobalt, you’ll find the alternator. You’ll need some simple hand tools and some mechanic knowledge to replace it. Here’s how to repair an alternator at home, which can save you a ton of money.
Tools required:
- Ratchet, 3/8″ drive
- Adapter set
- the Philips screwdriver
- ratchet wrench
To prevent premature wear on the new device, ensure sure your Cobalt’s battery is completely charged before you start. To keep your Cobalt operating at its peak, make sure you are replacing the alternator with an OEM model. Initially, disconnect the battery.
Start by releasing the clamp holding the air intake tube to the filter housing and engine when you enter the engine bay to remove the old alternator. Use a Philips head screwdriver to accomplish this and then take off the air filter housing. After that, unplug the MAF sensor’s wiring harness from the car.
Put the 3/8″ ratchet in the square hold you find in the belt tensioner arm. After removing the serpentine belt from the pulleys by rotating the tensioner counterclockwise, the tensioner should be released.
The alternator’s wiring harness should be disconnected. The alternator of the car should have its terminal nut and battery cable removed. The three bolts keeping the alternator in place can now be released, allowing you to remove it by hand.
Install the three mounting bolts and torque them to specifications while holding the new alternator in place. For torque specifications, you’ll need to consult a service manual. Place the battery cable and terminal nut in place, then tighten to the required torque. The electrical harness can now be plugged back in.
Replace the belt onto the pulleys after rotating the tensioner pulley with the ratchet. If you forget, a diagram in your engine bay will teach you how to turn it back on.
Tighten the retaining bolts to specifications before replacing the air filter housing. Reattach the air tubing, then tighten the clamp. Reconnect the batteries and plug the wiring harness back into the MAF when finished. You’ve now replaced the alternator on your own Chevy Cobalt.
How much does a Hyundai alternator repair cost?
A Hyundai Elantra alternator replacement typically costs between $586 and $878. While parts are priced between $513 and $786, labor costs are predicted to range between $73 and $92. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
When changing a generator What else ought to I swap out?
Other improvements are important to make while changing an alternator. Replace the idler roller, tensioner, and serpentine belt when you replace the alternator in your automobile or truck.
Can I change my alternator on my own?
You can replace an alternator on your own in around two hours on average, however this may vary a little depending on your level of auto technician expertise. Timing may vary slightly and you might have to leave the car for the day if you bring your car to a shop to have the alternator replaced.
How much does a 2007 Chevy Cobalt alternator replacement cost?
Estimated cost of replacing an alternator in a Chevrolet Cobalt. Alternator replacement for a Chevrolet Cobalt typically costs between $629 and $803. Between $488 and $625 is the anticipated price for parts, while labor costs range between $141 and $178.
What location does the alternator have?
The serpentine belt in your engine powers the alternators, which are situated near the front of the engine. The power from the crankshaft and serpentine belt is used by alternators to move magnets across a particular surface made of wires and cables known as the conductor.
How much does a 2007 Chevy Cobalt alternator cost?
For your 2007 Chevrolet Cobalt, we presently offer 5 alternator products with prices ranging from $171.99 to $376.99 in our inventory.
How long does changing an alternator take?
It will take a professional roughly two hours to replace an alternator. It could take longer than two hours for a technician to work on your vehicle, so don’t assume that it will just be there for that amount of time. And it will take even longer if the store needs to order parts.
How long is the lifespan of a Hyundai alternator?
Many drivers don’t even consider an alternator as a potential problem. It discreetly goes to work generating the necessary electricity for your car’s components. An alternator typically lasts for at least eight years and has a lengthy lifespan. Your alternator may last a lot longer or it may wear out considerably more quickly depending on driving circumstances, maintenance, and driving style. We want you to be aware of the indications that an alternator repair is necessary as your Hyundai dealer.
How can I know if my alternator is damaged?
As was already noted, if your engine is difficult to start, your alternator may not be charging the battery. As a result, when you turn the key in the ignition, all you’ll hear is a clicking noise rather than your engine’s purring sound.
On the other hand, if your car repeatedly stalls out while you’re driving, it can mean that the alternator isn’t supplying the spark plugs with enough power to keep the engine running.
Does AutoZone install alternators?
To make sure the charging system is operating properly, you can take the car to AutoZone and have the alternator examined there. Depending on the precise year, make, model, and engine of your vehicle, some of these instructions may change somewhat.
An alternator can be damaged by what?
- incorrect use of jumper cables
- Adding too many attachments to the charging system
- liquid leaking, or
- a belt that’s too tight and risky for bearings.
You might wonder what exactly the alternator accomplishes. In essence, the alternator keeps the battery charged to enable the car starter to fire. The alternator keeps the battery charged continually once the automobile is moving. The battery will gradually lose its charge if the alternator malfunctions, rendering your automobile immobile.
When should an alternator be replaced? The quality, driving style, and number of electronic accessories being used all have an impact on an alternator’s lifespan. Alternators have no predetermined service interval and thus are susceptible to sudden death.
Does it make sense to replace an alternator?
If the alternator is broken, it is typically wiser to replace it totally. Even though they can be expensive, new ones are generally preferable than remanufactured or rebuilt alternatives. Since the mechanical components have a lot of miles on them, they most likely won’t last as long as a new one.
Check for a remanufactured or rebuilt alternator at your neighborhood auto parts store if you can’t afford a new one. If a mechanic is handling the installation, be sure they provide you a brand-new alternator rather than trying to save money by using a refurbished or rebuilt one.
A high-output alternator, which is more expensive, may be required for some vehicles with increased electrical needs, such as ambulances or vehicles with sizable, power-hungry sound systems.
Depending on the type of car, the cost of the parts varies widely, but it often falls between $150 and $300. An OEM alternator for a more recent Mercedes or Audi can easily cost close to $1,000 as more costly automobiles would typically demand more expensive parts.
Since certain alternators are simpler to access and require less time to work on, labor expenses also vary, but budget between $200 and $600 for the work.
Expect to shell out anything from $350 to $900 in total for an alternator replacement. In most circumstances, it will be less expensive to have an independent mechanic handle the work than a dealership.
Why does an alternator fail?
Any charging issue with the car, even a loose battery wire, is brought in:
“This battery cable needs to be replaced, and your automobile needed a new alternator,” the mechanic said.
A fresh alternator may fail right away if it tries to charge a dead battery since continuous operation in full charge mode can destroy an alternator.
After replacing the alternator, do I still need a new battery?
response given by The battery must be disconnected from the engine, but the battery need not be replaced when the alternator is changed. Batteries normally last three to four years, while alternators typically last seven to ten years.
What happens to an automobile when the alternator fails?
An alternator that is malfunctioning will make a grinding or whining noise. Your alternator may be failing if you hear even a slight rattling sound coming from the engine. The majority of alternator noises are brought on by loose bearings.
Yes. However, a damaged alternator can only keep a car running for a brief time. Once the battery is discharged, the vehicle won’t start because the alternator is in charge of charging the battery when the engine is running.
Start the car’s engine by opening the hood. While the engine is running, disconnect the negative connection from the battery. The alternator likely has to be repaired or replaced if the car dies or stalls.
A failing alternator first results in a number of electrical problems before the car completely malfunctions. Nevertheless, an alternator can stop functioning gradually over time or suddenly. Usually, people can hear the whining sound that an alternator makes and get it fixed before it entirely fails.
If the alternator fails while the automobile is being driven, power usually gradually drains from the vehicle. Just before the automobile loses power and stops, you’ll notice the headlights begin to decrease.
Can a damaged alternator still power a car?
Can a car still run with a damaged alternator? A damaged alternator can only keep a car running for a short period of time. When the engine is running, the alternator charges the battery, and once the battery is empty, the car will not start.