How To Replace A Hyundai Sonata Key Fob Battery?

My Hyundai Sonata’s key fob isn’t functioning as efficiently as it once did. Is there a way I can unlock my key fob and change the battery without having to buy a new one?

In less than two minutes, find out if your auto insurance is being overcharged.

Without a doubt, you can replace the key fob battery on a Hyundai Sonata by yourself. It’s quite easy to do and can help you avoid having to buy a new key fob. Simply prepare your replacement battery and take the following actions:

  • Find the tiny metal button on the back of your key fob by flipping it over.
  • Release the metal key by pressing the button.
  • Gently turn the key fob apart by inserting the metal key into the tiny keyhole.
  • Install the new battery after carefully removing the old one.
  • Replace the metal key by pressing the key fob’s two parts back together.

Long-term savings can be achieved by learning how to perform some simple DIY maintenance on your car as well as by installing the Jerry app and comparing prices for the coverage you require to locate the best offers.

What kind of battery does a key fob for a Hyundai Sonata require?

A CR2032 battery powers the majority of Hyundai key fobs. Once you have a new Hyundai key fob replacement battery in your possession, insert it into your key fob exactly where the old one was. Check to see if the battery is in contact with each connection.

What is the price of a Hyundai key fob battery replacement?

The battery in your Hyundai key fob is simple to change. A replacement CR 2032 3V battery is all that is required. They typically cost between $3 and $5 for a pack of 5. Wearing latex gloves is advised because you will be contacting a motherboard during this process, which could result in unintended harm.

  • Remove the emergency key from the fob’s base.
  • Between the release button and the key slot, insert the key.
  • Turn the key until the fob pops open as if you were unlocking a door.
  • Open the fob while facing the buttons downward (otherwise they will fall out).
  • Remove the barrier and motherboard, then set aside the button-side of the fob.
  • Remove the dead battery from its mount using the key.
  • Place the + side of the new battery in its bracket.
  • Replace the fob’s button-half, motherboard, and barrier.
  • Set the release button peg in the appropriate hole.
  • Reassemble the fob with a snap.

You’re done now! Press any button to put your Hyundai Smart Key to the test. If all was done correctly, a tiny red light should flash over the unlock button.

How can a Hyundai Sonata’s key fob be reset?

  • As soon as you get inside your Hyundai, check that all the doors are closed.
  • Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
  • Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
  • Congratulations

I can’t get my Hyundai key fob to open.

You must first depress the metal button or tab to release the actual key before you can open the key fob on a Hyundai. The fob will then pop open once you insert the key into the hole and move it around. Despite being somewhat high-tech, your key fob is robust.

Can I program a Hyundai Sonata key fob myself?

  • The Manufacturer made the decision not to provide self-programming features in this car.
  • You need to hire an automotive locksmith to configure your car’s remote for you.
  • To avoid any confusion and internet research, we inform you if your car needs professional programming.
  • Here, contacting a local auto locksmith is highly advised.

Why won’t my key fob operate now that the battery has been changed?

The most typical fix for a broken key fob is a battery replacement. However, replacing the batteries may not always be the best course of action. Therefore, your key fob might not operate even after a battery change for various reasons.

Handling the key fob circuit carefully is the first step in fixing the issue. Do not use your bare hands to contact the key fob circuit if you are not familiar with handling electronics. Call a professional right away to quickly diagnose and resolve the issue.

The following are additional causes for the key FOB’s malfunction:

Over time, a car remote’s button will inevitably wear out. When the button is depressed, the contacts notify the circuit board to carry out commands. The contacts may become separated from the buttons as they deteriorate. Pressing the buttons repeatedly is one of the greatest techniques to identify worn-out car buttons on car remotes.

Determine which of the following circumstances applies:

  • Only certain button presses, or all button presses, function.
  • One button operates while the other does not.

There is a problem with the automobile remote if the plastic that covers the key fob has also cracked. Open the key fob using basic tools, then inspect it for damaged contacts or crooked buttons. In the event that doesn’t work, get a new automobile key fob.

Your car remote might not function after changing the battery for another cause, which is the lock. Look for these indications to determine whether the lock or auto door has become faulty.

  • Manual or key operation of the lock does not cause it to unlock or lock.
  • Some door locks can be opened remotely, but not all.
  • Without the doors opening, a signal has been transmitted, as indicated by the indicator light flashing.
  • Door lock operates partially or not at all.

The automobile key may become damaged as a result of things like water, scratches, etc. The key fob may be damaged if it stops functioning right away after being trodden on, submerged in water, or opened. Other indicators to look out for include:

  • Whether a backup key functions
  • The buttons are stationary.
  • The Key is clearly damaged.

A damaged key can be replaced with a new car key. The key fob can be reprogrammed with assistance from the Colorado Springs Locksmith specialists.

There is a good likelihood that the battery change reset a car remote. When certain buttons are pressed, the key fob can also be reset. Therefore, the failure of many key fobs is a good indication that the automobile key remote has been reset. There are two indicators to watch out for:

  • No spare remotes operate.
  • car remote completely quits functioning

Can you do it yourself to program a Hyundai key fob?

Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.

There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.

How is the Hyundai Smart Key pry opened?

To remove the metal key, push the metal button next to it. Open the Hyundai key fob by inserting this key into the little opening in the rear.

Can I change a key fob on my own?

Yes, a replacement automobile key can be obtained without the original. Since people frequently misplace their car keys, replacing a misplaced car key is an easy operation. Nevertheless, depending on the key type, it could be pricey.

A key fob is a little electronic gadget that you can use to remotely lock and unlock your car. Other capabilities of the fob could include a remote engine starter, a trunk opening, or a proximity system that allows you to open your car without taking the fob out of your pocket.

Depending on how sophisticated the key technology is, replacing car keys can be expensive. An old metal key can be duplicated for less than $10 at a hardware store. On the other hand, the most recent smart keys must be ordered from a dealer and might cost between $200 and $500.

Your car key’s battery can be changed easily by opening it up, identifying the battery type, and going to the store. If you’re unsure of how to open the remote, it pays to consult your owner’s manual because you don’t want to force anything open and break it.

Today’s automobile keys are more secure and capable thanks to technology, but the gain isn’t free. The majority of modern keys feature complex electronic parts that must be configured before usage.

You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.

You might be able to program a replacement yourself, depending on the make and type of your vehicle. The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The catch is that in order to complete the process quickly or at all, you might need two functional key fobs.

It’s wise to acquire and program a backup remote before you require it. Additionally, a lot of used-car buyers (particularly auto dealers) will pay more for a vehicle with at least two functional key fobs or sets of keys.

A misplaced automobile key can indeed be replaced by a locksmith. If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.

What occurs if the key fob battery runs out?

My car’s key fob seems to be coming in and going out, though. I know I merely need to replace the battery, but I don’t have much free time. What if the key fob entirely fails while I’m operating the vehicle?

This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.

If time is of the essence, you should be aware that changing the battery in your key fob just requires two minutes, albeit you will need to visit a general store or pharmacy to obtain the battery.

Why not change the battery in your car insurance at the same time as you replace the one in your key fob?

You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.

Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.

If I change the battery, do I need to reprogram my key fob?

After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.

Why won’t my car key work now that the battery has been changed?

A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.