- Get rid of the old blade. Off the window, lift the wiper arm.
- Take away the wiper. The wiper will gently click free from the wiper arm once it has been turned.
- Put the replacement blade in place. Put the replacement wiper blade’s little bar attachment into the wiper arm’s hook.
In This Article...
RBull
I looked at my. It is probably a press fit, which explains why removing it would require some force. With a large screwdriver or a tiny pry bar, you should be able to accomplish this, but proceed at your own risk. Although I would personally, you would need to use extreme caution when working close to the glass. Maybe you could cover it with a thick towel or something like to provide protection in case it does slip. You said you had taken out the bolt, but I believe you meant the nut, and that is true. Carefully pry out the wiper arm’s bottom from the spline base where it connects to the window. Once you have the pry in the right position, I doubt it will require much power.
By the way, the only place I could buy a suitable new wiper blade was at this dealer.
Other wipers feature a locking clip (Photo 3).
Slide the locking clip out by lifting the wiper arm a few inches off the glass. Pull the arm away from the splined shaft after lowering it.
Every wiper arm has a hinge at the base that enables it to flex as it follows the window’s curve. Even with a fresh blade, if the wiper skips over some areas, it’s likely that the hinge is corroded and binding. Due to their little use, rear window wipers are the most frequently affected.
Although the hinge can be oiled, the corrosion and binding almost always come back. Replace the wiper arm in order to solve the issue permanently (available at an auto parts store).
A splined shaft accepts all wiper arms (Photo 1). Some have nuts holding them in place. Simply lift the protective cap, release the nut, and pull off the arm to replace that type (Photo 2).
The locking clip secures the other type in place. Install the replacement arm after unlocking it as demonstrated in the bottom picture (Photo 3).
How are wiper blades changed on a Hyundai Tucson 2022?
The wiper blades may be worn out or cracked and need to be replaced if they no longer effectively clean the windshield.
Do not try to manually operate the wipers to avoid damaging the arms or other parts.
Use of a non-recommended wiper blade could lead to wiper failure and malfunction.
- The wiper arms should only be raised when in the highest wiping position in order to avoid harming the hood and the arms.
- Before driving, always put the wiper arms back on the windshield.
The wipers on this car are “hidden,” which means that they cannot be raised from their bottom resting position.
- Once the engine has been turned off for 20 seconds, raise and hold the wiper lever in the MIST (or V) position for around 2 seconds to get the wipers to the top wipe position.
- You can now remove the wipers from the windshield.
- Reinstall the wipers on the windshield gently.
- To put the wipers back in the bottom resting position, turn the wipers to any ON setting.
- Wiper blade clip: raise it. Next, raise the wiper blade.
- Pull down the wiper blade while activating the lock (1). (2).
- From the wiper arm, remove the wiper blade.
- In the reverse order of removal, assemble a fresh wiper blade assembly.
- The wiper arm should now be back on the windshield.
- the wiper arm up.
- Wiper blade clip: raise it. The blade assembly can then be removed by pulling it down.
- Invert the removal process when installing the replacement blade component.
Lift the wiper arm of the rear wiper and move it to the lower middle portion. To remove the wiper blade, pull it.
- Pull the wiper lever to the MIST position for more than 2 seconds after turning the ignition off of the car within 20 seconds to get the wiper to the middle of the bottom section.
- The wiper blade should be raised and removed.
- Install the new blade assembly by sliding the center piece into the wiper arm’s groove and pushing it in until it clicks.
If the replacement is finished, put the wiper arm on the back windshield, turn the key in the ON position, and use the wipers to test that the blade is properly placed.
- By attempting to pull the blade assembly just a little, be sure it is securely fastened.
We advise having the wiper blade changed by a certified HYUNDAI dealer to avoid harm to the wiper arms or other parts.
The wiper arm’s core component could be harmed if it is pulled with too much force.
- When the wiper is used without washer fluid or the blades are frozen, it cannot operate for approximately 10 seconds. This is not a problem; rather, a motor overload circuit in the wiper motor has triggered the wiper protection mechanism.
- With the wiper blades elevated, the front windshield should be cleaned with a water hose and thoroughly dried. When the oil or wax is applied to the wiper blades, they should also be cleaned.
Is there a rear wiper on the Hyundai Tucson?
The rear screen wiper blades listed below are compatible with the Hyundai Tucson SUV from 2015 to 2021. The 14″ plastic moulded kind of wiper required for the Hyundai Tucson 2015–2021 model is simply replaceable.
Will the 2022 Tucson get rear wipers?
Complete Replacment Bosch Rear Wiper, suited for the Hyundai Tucson Mk.3 RHD in the UK from 2021 to 2022. You can be confident that your field of vision will be clear with Bosch wiper blades.
You can’t always rely on having a clean view out the back due to the increase in the amount of Estate, Squareback Vehicles, and Vans on our highways. The back window quickly becomes a visibility and safety hazard due to rain and filth. Bosch rear window wipers provide dependable, safe, and long-lasting high quality to ensure that your view is not impeded in these challenging driving circumstances.
Vehicle information
- To Fit: 2021–2022 Hyundai Tucson Mk.3
- the years 2021 and 2022
- Number Plates: 70, 21, 71, 22, and 72 are appropriate.
- 5 doors total
- SUV body style
Includes:
H275 – rear wiper (27.5 cm | 11 in)
The advantages of utilizing Bosch:
- Performance of the wipers is strong and practical.
- Even in adverse conditions, the incredibly flexible blade base allows for exceptionally even and smooth sweeps without rubbing or squeaking.
- An extended service life is made possible by the extra-hard extruded edge section with dual micro-edge, which offers particularly thorough wiping.
Prior to use, the purchaser must confirm that is properly installed on the Hyundai Tucson.
Prices for delivery options will be shown at the checkout and will vary based on the item’s size, weight, and shipping destination. On roof boxes, we use DHL Parcel, Royal Mail, EVRi, and DX 2 Man Service.
- British Standard Delivery
- Delivery to the UK
Tomorrow* – Starting at PS3.99 (calculated at Checkout). Friday orders would be delivered on Monday.
UK Roof Box Shipping
All Roof Boxes – PS14.95 – 3-4 Working Days* (Available to Mainland UK addresses only).
Orders to Northern Ireland, the Channel Islands, the UK Islands, and portions of Scotland may be subject to delivery costs (these charges will automatically be calculated when you reach the Checkout). It will take two working days for UK Express Delivery in certain of the aforementioned places.
What size wiper blades come with the Hyundai Tucson?
All of the following wiper blades are made to fit the Hyundai Tucson 2015–2021 model, which requires a 26” wiper blade on the driver’s side and a 16” blade on the passenger side. For this model, the Standard Hook arm attachment is the appropriate type of wiper arm fitting. Upgrade to the more modern Retrofit style wiper blade is an option. We also provide rear blades for this Tucson; just click on the Rear Blades item below.
Rear wipers are they different?
Wiper blades come in three major types: “conventional,” “flat,” and “hybrid.”
Conventional wipers are easily distinguished because of the attached blade to an articulated metal frame. They are the type that have long been considered standard equipment on many autos. Flat wipers have gained popularity in recent years.
They consist of a substantial blade and a little plastic connection block in the center.
Hybrid wipers combine the two in some way, and the blade’s “frame” serves as an aerodynamic spoiler.
In order to prevent the blade from lifting quickly, this is meant to force it onto the screen.
Upgrade to flat or hybrid wipers if your automobile currently has conventional wipers for better looks and performance.
Rear wipers are often much smaller than front ones, and while many cars have front wipers that are similar to the rear ones in appearance, some have model-specific rear wipers that have the arm and the blade combined into a single unit.
These must be replaced together and are often secured to a splined shaft by a little nut.
Why won’t my rear windshield wiper operate?
The wiper system cannot receive power when the wiper motor breaks a fuse, which makes the wipers inoperable. The wipers won’t operate and you won’t hear anything when you turn on the wiper switch if a blown fuse is the source of your problems. If a fuse has blown, your dependable mechanic will be able to identify it, identify which fuse is the issue, and quickly repair it.