- Enter your Hyundai and shut all of the doors.
- Turn your Hyundai’s ignition to the “ACC” (accessory) position using your key.
- Hold down the “open” or “unlock” button on the key fob until the headlights of your automobile begin to flash.
In This Article...
Step 3
When the car’s lights start to flash, press and hold the “Open” or “Unlock” button on the keyless entry FOB. Your Hyundai vehicle has now been reconfigured to the keyless entry FOB.
- Only Hyundai keyless entry FOBs that have already been programmed can be reprogrammed using these keyless entry FOB programming instructions.
- Toyota key
- Keyless entry FOB previously programmed for a Hyundai
- Not all Hyundai car models may be compatible with these setting recommendations. For assistance with programming a keyless entry FOB for a specific model, speak with your nearby Hyundai dealership or service center.
How can I set up my Hyundai key fob to work with my vehicle?
- As soon as you get inside your Hyundai, check that all the doors are closed.
- Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
- Congratulations
Can you do it yourself to program a Hyundai key fob?
Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.
There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.
What is the cost for programming a key fob at Hyundai?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.
Where is the Hyundai Elantra’s smart key holder located?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
How do I connect my car’s key fob to it?
Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote.
Reversing step 6 by closing the door before entering the key may help if the above method doesn’t work because some Toyotas have a different approach.
Can I program my own car key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
Why doesn’t my automobile recognize my key fob?
Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.
Has my Hyundai Elantra remote start been installed?
It does, indeed. Simply make sure your car is correctly connected to the BlueLink Connected Vehicle System and that the software has been downloaded and set up on your phone. With the help of this app, you can remotely turn on the heater and start your Elantra so that everything is ready to go when you step outside.
Will my Hyundai still start without the key fob?
I have a lifted 2001 Miata for pre-running and a 2004 Mazdaspeed Miata for pavement fun because I enjoy 2-seater, RWD convertibles. I compete in desert races like the Mint 400 and the Baja 1000 in air-cooled Volkswagens. I’m the only driver competing in an EV, the Rivian R1T, and I’ve twice won the seven-day navigational challenge known as the Rebelle Rally.
The technology, luxury, and design of the 2020 Hyundai Sonata have all undergone significant enhancements, and there is also a cool new piece of technology. With Hyundai’s new Digital Key, Sonata owners may start their cars, unlock their vehicles, and sound the horn through a smartphone app. Of course, this is not brand-new technology, but Hyundai has a trick up its sleeve.
By placing their phone on the Sonata’s door handle, drivers may unlock the vehicle via NFC (near-field communication). While some automobiles can be started remotely, others require a standard key fob to be inside the vehicle in order to properly engage the vehicle. Even while the Sonata will still be marketed with a smart fob, all you really need to start driving is your phone. The Sonata will give you complete access to the vehicle and even alter the seat, mirrors, radio, and driver assistance parameters to your preset profile if you simply insert it into the wireless charger/NFC reader.
Playing now: See this:
Additionally, you may give friends and family access to the automobile for however long you like by sharing your key. Owners can theoretically be anywhere in the world and grant access to their Sonata to up to four others because sharing happens directly via the app. Imagine lending your Sonata to a friend without any additional fuss while you’re away on a business vacation.
Also included is an NFC card that functions similarly to the one used to open a hotel room. To continue using Digital Key even if someone else has to drive your car while you’re out and about, you may either keep this as a backup or give it to someone like a valet driver or parking attendant.
The catch is that as of right now, since only Android phones support NFC, this technology only functions with them. Except for the entry model, all versions of the 2020 Hyundai Sonata—which should hit showrooms in October—come standard with Digital Key.
After changing the battery, does the key fob need to be reprogrammed?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
Is remote start available for the 2017 Hyundai Elantra?
In the 2017 Elantra, Hyundai adds new functionality to its Blue Link telematics system, including remote climate control start, Google-powered destination search, and stolen car recovery. Some of Blue Link’s features can be managed using mobile devices, including locking and unlocking your automobile.
O’Reilly does key fobs program?
Over 20 million keys are typically lost by Americans each year! You know how frustrating it can be until you get a replacement key produced if you’ve ever lost the key to your house, apartment, car, motorcycle, or RV and didn’t have a spare. Since hiring a professional locksmith can occasionally be expensive, you might be wondering where else you can order keys.
Car keys of many kinds and models are produced by O’Reilly Auto Parts. They can configure your remote keyless entry system and transponder key as well as build and sell key fobs. The keys can be ordered online.
Since there are thousands of O’Reilly Auto Parts locations around the country, going there to get a key produced is quicker and easier than finding a locksmith. They have self-serve kiosks and provide key-cutting services. Discover what keys O’Reilly Auto Parts makes, sells, and how to order one by reading on.
Are automobile keys programmed at Home Depot?
Although Home Depot is largely a home improvement business, they also manufacture automobile keys and can program transponder keys and key fobs. The cost of keys can range from $2 to $169 depending on the make and model of your car.
However, in order to use the key duplication service offered by Home Depot, you must have a functioning car key for them to copy. The best and least expensive solution if you’ve lost your key is to go to a locksmith.
Why won’t my key fob function when I change the battery?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.