To pry open the smart key’s back cover, use a small tool.
In This Article...
Bad~Papa
Remove the internal key before opening your key fob. The fob can be removed by pulling the small lever on the back of it. There is a slot or depression beneath the hole where the key originally came from. To split the key fob in half, insert a flat-head screwdriver into the slot and twist. As you separate the plastic parts, you may access the interior.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.
I don’t have a key fob, how do I start my Kona?
Electronic Key Start When you get inside your car, put the phone on the wireless charger pad, depress the brake, and then start the engine.
Why won’t my Hyundai Kona’s key turn?
The following are the most frequent causes of the key not turning in the ignition:
Most cars have a steering lock that locks the wheel when the key is removed, but occasionally it can break down and prevent the key from turning.
It can also become stuck in a specific location, but occasionally turning the key while jiggling the steering wheel will free it.
Gear selector – Most automatic transmission vehicles won’t let the key to turn until the car is in park or neutral. These can also occasionally become stuck, but a simple wiggle will usually free them and allow the key to turn once again.
If there is a problem with the ignition barrel or the key, the problem may start out mildly and gradually develop worse. If there is a problem with the steering lock or gear selector, it may happen right away.
Depending on the root of the problem, a repair could be as straightforward as changing the key, followed by the ignition barrel or a more involved repair including the steering lock or gear selector.
How much is a key fob for a Hyundai Kona?
- The kind of key you require
- The year that the vehicle was made
- the time of day and where you are
- where to obtain a replacement key (dealer, automotive locksmith, online, etc.)
- access to the code needed to create a new key
- or not the initial ignition
What does the Hyundai key fob’s hold button do?
What does auto hold accomplish? It prevents your automobile from rolling away accidently when it is moving or stopped, thanks to the ABS/ESC hydraulic unit.
How is a Hyundai Kona 2021 remote started?
When the handbrake is applied and the car is locked, the user can remotely start it by first pressing the lock button on the smart key, then pressing and holding the engine start button.
With this innovative feature, the driver can pre-cool or pre-heat the cabin before getting into the car, guaranteeing comfort even in severe weather.
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
How is the battery in the key fob removed?
- Pry the seam or notch gently. RD.com/Alaina DiGiacomo.
- Check the Battery Orientation (Positive and Negative Ends)
- Put the New Battery in After Popping Out the Old Battery.
- Test the key fob’s functionality by snapping it shut.
What sort of battery is required for a Hyundai key fob?
The battery in your Hyundai key fob is simple to change. A replacement CR 2032 3V battery is all that is required. They typically cost between $3 and $5 for a pack of 5. Wearing latex gloves is advised because you will be contacting a motherboard during this process, which could result in unintended harm.
- Remove the emergency key from the fob’s base.
- Between the release button and the key slot, insert the key.
- Turn the key until the fob pops open as if you were unlocking a door.
- Open the fob while facing the buttons downward (otherwise they will fall out).
- Remove the barrier and motherboard, then set aside the button-side of the fob.
- Remove the dead battery from its mount using the key.
- Place the + side of the new battery in its bracket.
- Replace the fob’s button-half, motherboard, and barrier.
- Set the release button peg in the appropriate hole.
- Reassemble the fob with a snap.
You’re done now! Press any button to put your Hyundai Smart Key to the test. If all was done correctly, a tiny red light should flash over the unlock button.
How much does a new Hyundai key fob cost?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
How come my key fob was inside the car when it locked?
If the key fob is too far from the keyless proximity sensors, it may become stuck in the automobile. Similar situations when pressing the ignition button results in a “No Key Detected” notice may have happened to you before. The car may lock if no key is found.
Keyless entry automobiles include a variety of measures to avoid a situation when a key fob is left inside the vehicle. For instance, the majority of new automobiles have sensors that can detect keys, so you cannot lock the keys in the trunk. But sensor dead zones are common in automobiles.
None of the failsafes that prevent the car from locking will keep you safe if your car key fob is outside the range of all sensors. The sensor ranges differ from vehicle to vehicle, however you might be able to pull the key fob that is locked in the car with a hook and unlock the door.
Why won’t my key fob operate now that the battery has been changed?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
Are Hyundai keys duplicable?
The keys for Kia and Hyundai vehicles have changed over time. Most Kia and Hyundai automobile keys produced between 1990 and 2000 are straightforward non-laser keys without transponder chips. Most of these Kia and Hyundai keys can be copied or cut by VIN number at your neighborhood Keyless Shop.
What occurs when the battery in your key fob runs low?
The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. When a smart key fob is in your pocket or handbag for automobiles with push-button starts, the car might not always detect it if the battery is low.
If I change the battery, do I need to reprogram my key fob?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.