Hyundai Sonata’s remote key fob is powered by one CR2032 battery. Depending on the type, brand, and container size you choose, the majority of CR2032 batteries cost less than $6. When shopping for a new battery, you can bring your old one with you.
After changing the battery, most of the time, the key fob does not require reprogramming. Recheck the voltage of the new battery if your remote key fob isn’t working. Read the user’s manual or speak with a local dealer if it is not helpful.
The battery in your 2018 Hyundai Sonata remote key fob can be changed by you. The fob’s case disassembly is the hardest part. With our step-by-step instructions, it’s quite straightforward.
Depending on the car, the cost of replacing the battery in the fob ranges from $30 to $500.
Battery replacement is recommended for the Hyundai Sonata keyless entry remote at least every three to four years. Battery life varies depending on usage, quality, and operating circumstances. Typically, lithium cells have a longer lifespan.
Battery replacement is usually necessary if the Sonata fob’s battery is older than 4 years, it has a dim battery indicator on the dashboard, the signal strength has decreased, or it takes several clicks to open or lock the doors. There’s a good chance that the current battery is poor; nevertheless, if that doesn’t work, the key fob needs to be changed or repaired.
In This Article...
I can’t get my Hyundai key fob to open.
Start by removing the metal key from a Hyundai that is not too old by pressing and holding the metal tab or button. Then, insert the metal key into the minuscule opening and turn it in either way to release the back cover of your Hyundai key fob. The case ought should then open.
Without a key, how do I access my Hyundai Sonata?
- Create a loop by folding the strip in half.
- Pushing it through the door jamb can help you get it inside your car.
- Till you can clasp it, maneuver the loop around the lock. In order to open the door, raise it.
How is the Hyundai Smart Key pry opened?
The case ought to open easily. In order to start, look for a little notch or imprint down the side of your key fob if you drive an older Hyundai car. Then, spin the key fob in either way with a coin or flat-bladed screwdriver to gently pry it open from the notch.
Where is the Hyundai Sonata’s smart key holder located?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
How much does a new Hyundai key fob cost?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
If I locked my keys in my car, how can you get into it?
- Obtain Your Extra Key.
- Open Your App.
- Use fishing line or string to open manual locks.
- Use a wire clothes hanger to unlock.
- Use an inflatable pump wedge to unlock.
- Use a Strip of Sturdy Plastic to unlock.
- Call a locksmith or AAA.
- Make a police call
What happens if your key fob breaks?
- Close the key fob after inserting the mechanical key once more.
- Press the START button with the key fob. Instead than pressing the button with your finger as usual, push the key fob against it. Many manufacturers utilize this backup device to make sure the car can start even if the key fob is dead.
- Some vehicles have a secret key fob slot that can be used to start the engine. For instance, the backup slot is located inside the cup holder in some Ford models. Your fob will fit perfectly in the slot. Use the push button start as usual after inserting the dead key fob into the holder.
- Check the steering column for a physical key slot if neither of these approaches succeeds (some Mazda models have this feature). To start the car, place the mechanical key within the keyhole.
Why won’t my key fob function when I change the battery?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
What is the price of a key fob battery?
These batteries typically cost $10 or less, however some fobs need two. Since it just takes a few seconds, battery specialists and dealers frequently replace the batteries for free.
What occurs when the battery in your key fob runs low?
The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. When a smart key fob is in your pocket or handbag for automobiles with push-button starts, the car might not always detect it if the battery is low.
If I change the battery, do I need to reprogram my key fob?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
Will a low key fob battery cause the check engine light to appear?
A bad battery will inevitably result in low voltage to the vehicle’s computer, which could turn on the check engine light. Before performing any additional diagnostic testing, the mechanic will test your car’s battery when you bring it in for service.
Can a key with a low battery prevent a car from starting?
If your key fob isn’t detected inside the car, the keyless entry system won’t start the engine. The system probably won’t be able to tell when the key fob is inside the car if it has a dead battery, which will prevent the engine from starting. By pressing down while placing the fob on the start engine button, you can get past this problem. Even though this should enable your engine to start, it is still beneficial to change the fob batteries whenever you have the opportunity.
How long will a key fob with low batteries operate?
Here is the amount of time you have if your keyless remote battery is low if you’re wondering how long you have. Whether a key fob has a low battery depends on whether it is a smart key fob or a conventional fob. A normal key fob with a low battery can last up to 4 to 6 years, whereas a smart key fob with a low battery can last for up to 2 to 3 years.
Since nothing lasts forever, it makes sense to be aware of the time limit set for each equipment you have in your possession. Your car and each of its parts are built to last for a certain amount of time.
How you use and maintain those components will influence whether they last as long as they should. The key fob for your car is not an exception. If you’re wondering how long it will take to replace the battery in a Honda keyless remote, read on. The time range described above may be possible in some circumstances, but it may not always happen as intended.
How often should the battery in my key fob be changed?
Car key fobs are so practical that it’s simple to ignore them. But did you realize that regular maintenance is required for your key fob? Batteries for key fobs should be changed every three to four years, though this will depend on how frequently they are used and how well they are made.
You’d wish you had taken better care of your key fob if it were to abruptly cease working while you were far from home. Avoid being stranded and having to pay for a tow because your key fob isn’t working properly. Here are some red flags that could indicate that it’s time to replace your key fob batteries before it’s too late.
Can I operate a vehicle with a low battery?
Will I be able to drive my truck safely after it warned me that the key fob 2 battery was low when I got in it? Does the key fob required to operate and drive my truck need to be present? Or is there a deeper problem with my car itself? It is not keyless entry or anything of the sort; I have a key. Can I simply carry on with my tasks while using a dead remote?
hello there Prior to 2009, the majority of automobiles equipped with a FOB remote control included a physical key that was used to manually unlock doors and start the ignition. The FOB is more of a luxury than a necessity. The FOB is essential to the vehicle’s operation if it has a keyless or push-button starter, so you would need to replace the battery before it was fully depleted. In spite of the fact that you shouldn’t require the key chain remote’s functionality to operate the car, it’s always a good idea to maintain it charged in case you do.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our