The 2016 Hyundai Elantra’s jump start procedure is relatively straightforward and can be broken down into three or four parts. Jumper cables and a second car to assist with the jump start are first things you’ll need. The battery is located on the right side of the engine when the hood is opened. The positive terminal is on the left and the negative terminal is on the right. Before starting your car, connect each cable to the appropriate battery terminal. It’s safe to remove the cables once the automobile is moving, and that’s all there is to it.
In This Article...
How can a Hyundai Elantra hybrid be jumpstarted?
- To make sure your car is completely charged and functional, drive to the closest charging station.
You should consult a professional if this issue persists or your car isn’t charging properly since you might require a new 12V battery or a conventional jumpstart.
In addition to keeping your Sonata Hybrid charged, it’s critical to have a reliable auto insurance plan. Use the Jerry app to find the finest coverage at the lowest prices.
After you download Jerry, all you have to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $887 year on average.
Where can I find a place to jump a car?
Do not connect the black (negative) lead to the discharged battery after picking up the lead. This might spark, which might result in an explosion. Finding a bare metal ground for the black cable end is the next step. Checking your owner’s manual should be your first step because certain vehicles may have a specific jump location.
How may a car that has been idle be jumpstarted?
Attempting to jump-start a car that has been sitting for a year is the simplest initial step. A battery will lose its charge after spending a lot of time idle, leaving you with no power to run the vehicle. When you try your resurrection, start here.
- Oil, coolant, and trans fluid should all be replaced in the vehicle.
- Ensure that the vehicle with the live battery is not in motion.
- Your jumper cable’s red clamp should be connected to the positive contact of the battery in the dead car. Either a “+” or a red cover will be on it.
- Connect the negative terminal of the active automobile battery to the opposite red clamp.
- Attach the black clamp to the battery’s negative terminal on the running vehicle. Either a “-” symbol or a dark cover will be on it.
- Connect the other black clamp to a grounded metal element or surface that is not painted on the deceased car, such as the frame.
- Begin the live-battery vehicle.
- Allow it to run for a few minutes so that the dead battery can begin to recharge.
- Start the automobile with no power.
- Keep the other car running for a few more minutes and try again if the engine won’t start.
- In reverse sequence, remove the clamps: black clamp from grounded surface, black clamp from negative post of good battery, red clamp from dead battery, and red clamp from good battery.
If your automobile won’t start after a jump, what should you do?
Give the jump starter wires some time to settle before attempting to start the car again. The dead battery is gaining some minor charge while the good automobile is in motion.
It can be challenging to restart the vehicle when the battery becomes extremely weak. The required electrical power cannot be produced by the cables on their own, but a few minutes should suffice.
Why won’t my car start with a jump?
Ever ponder the cause of a non-starting car? A weak or dead battery could be one of the causes. Use a battery tester to check the battery’s strength if it can measure cranking amps. If the battery cannot be tested, attempt jump-starting. If the car starts immediately away, a dead battery is most likely the cause of your issue. To guarantee proper contact, charge the battery and clean the terminals and cable connectors. If you try to jump-start your automobile and it won’t start, your starter, alternator, or another electrical system part may be broken. Make careful you read and abide by all handling and safety directions provided on the battery on our website.
How can a battery that is fully dead be jumped?
- Place the vehicle you’ll be using for a jumpstart next to the vehicle with a dead battery, close enough for the cables to reach. The cars shouldn’t be in contact with one another.
- Switch off the engines of both vehicles.
- Clamp the positive cable’s first end to the positive clamp on the dead battery.
- Now have a buddy attach the other end of that cable to the positive clamp of the other battery.
- Next, attach the negative cable to the good battery’s negative terminal.
- The other end of the negative line should then be connected to a ground on the car that has the dead battery. The engine block or similar metal surface far from the battery can serve as this. While doing this, take care not to touch the cable’s two ends together.
- Launch the emergency vehicle that is supplying the electricity.
- With the weak battery, start the vehicle. Check your connections and tighten or clean them as necessary if it won’t start.
- If the problem vehicle does manage to start, let it run for at least 20 minutes to give the battery time to recharge before turning it off.
- If it still won’t start, there might be an additional issue. For assistance, dial a nearby service station.
- Reverse the order of the cables’ disconnection.
When jumping an automobile, why don’t you connect the negative?
Shortcuts for Jumpstarting a Battery Never attach the black line to the dead battery’s negative (-) terminal. This could cause an explosion, making it extremely dangerous.
Will giving someone a jump start do damage to my car?
It is honorable to provide a helpful hand. You can consider letting someone use your car to jumpstart theirs if you observe them with a dead battery. You might be concerned that it might harm your car in the process, though. You want to help, but you don’t want to do anything to harm your car.
Giving someone else’s automobile a jump start will typically not cause any damage to your own. They would control your battery, but you could simply use your car to replenish it. If the jumpstart is effective, the donor automobile doesn’t actually sustain any significant harm. However, there is a good potential that your automobile will be destroyed if the jumpstart is not done correctly. Here’s how to go about doing that:
Can you safely jump-start newer vehicles?
Is it accurate to say that you shouldn’t ever jump a newer model automobile because it harms both cars?
Dana Tobin, a viewer of 5 On Your Side
Sources:
- Master Auto Repair technician Scott Ramsey
- John Jackson, Master Auto Repair Technician
- Manager of Rich’s Automotive & Truck Repair Don Fielder
- Don Schuman, Missouri University of Science and Technology’s Department of Chemistry
Answer:
It is untrue that jump-starting a newer model car will result in harm to both the cars involved.
Explanation:
According to our specialists, newer model cars are typically categorized as being built after 2005. These models might be trickier.
“There are so many computers and other potentially dangerous components in automobiles. Because the battery is not always in plain sight, it is more challenging. It’s frequently more difficult to simply connect the cords to them because they’ve been placed in the trunks and behind the back seats “Ramsey stated.
Nevertheless, our experts concur that it is still possible to jump-start one. However, you should be aware of the proper technique.
“When a system experiences overvoltage, a set of regulator diodes blow, which can lead to a cascade problem. Observing the manufacturer’s guidelines, which may include instructions on how to connect and unplug your battery, “Schuman stated.
According to the experts, you should call a roadside assistance service or take that model of automobile to an auto body shop if you don’t know exactly what you’re doing when it comes to jumping it.
What is the time required to jump start a car?
What Is the Time Required to Jump a Car? It will likely take you between 10 and 15 minutes to jump-start your automobile on your own. It might go faster if you hire an expert to jump-start your vehicle.
Does revving an engine assist in automobile jumping?
Tom and Ray, When doing a jump start, my guy is adamant about revving the engine. When he starts the nice automobile, he revs it, and when he starts the bad car, he also revs it. Is there a justification for this action? When should you rev your engine and when is it appropriate?
Ray: Amanda, bad news. Your guy is essentially correct. I understand that’s not the information you were hoping for.
Tom: Within reason, revving the engine during a jumpstart is not a bad idea. Under no circumstances can the gas pedal be “floored.” However, your engine’s alternator also spins more quickly while your engine is running quicker. An alternator generates more electricity as it spins more quickly.
Ray explains that by boosting your engine’s speed to 2,000 or 2,500 rpm and maintaining it there while the other car tries to start, you can boost your alternator’s output and give your battery a little extra power that it can then give to the other car. That extra power can be significant depending on the size of the individual engines and battery health.
Tom: It’s also a good idea to make sure that all of the electrical accessories are off before jump-starting another vehicle. You can donate more if you use less electricity to power your own vehicle. Therefore, you should switch off the headlights, the air conditioner, the subwoofer, and the motorized buttscratcher.
Ray: The same regulations apply to the donee, or the vehicle receiving the jump start. All of the accessories should be turned off. In this manner, the alternator’s whole output can be used to recharge the battery. It is possible to accelerate the battery charge once the automobile has started, but driving is the most effective method.
Tom: You might need to drive it for 20 minutes or several hours, depending on how completely dead the battery was.
Ray: Good. Driving should be safe for 20 to 30 minutes if the dome light is only left on. But it might take a lot longer for the battery to fully recharge again if you left the headlights and the Easy-Bake Oven on all night. In fact, if it’s severely depleted, you might need to bring the vehicle to a gas station so the battery can be charged.
Tom: Of course, there’s also a chance that your battery is actually dead, or towards the end of its useful life. In that instance, driving to Fairbanks, Alaska, and back won’t recharge it. An updated battery is required. For this reason, once you jump-start your car and drive it for a time, make sure to stop it somewhere that’s “in the way,” like in front of some petrol pumps, before you try shutting it off and resuming it. That ensures that you will need another kickstart from someone!
Having a car-related query? Send correspondence to Click and Clack Talk Cars at 888 7th Avenue, New York, NY 10019, c/o King Features Syndicate Group.