The electronic power steering system in your car experienced a failure, as indicated by the EPS light on the dash of a Hyundai Elantra. Unlike the previous hydraulic steering systems, your car employs an electric motor to assist with steering. This light on the dash will turn on when your ECU detects a problem with the power steering motor. To determine the root of the issue, you should have your car inspected by a mechanic or a Hyundai shop. A power steering motor failure is a possibility, but it’s also possible that it’s something as easy as a blown fuse or a loose wire. When it is malfunctioning, you will typically also notice that your steering feels heavier.
The EPS turns on when you insert the car’s keys. When I start the automobile, it goes off again. If there is a problem, kindly respond.
If the electronic power steering system (EPS) light is on in a Hyundai Elantra, there may be a problem.
I recently had a CVS joint installed on my passenger side, and as a result, I now have three lights: an EPS light, an ABS light, and a low tire pressure light.
In This Article...
2 Gerard
Hi, I’ve observed the same issue today. After the engine was restarted, the ESP light illuminated and has not gone out since. I simultaneously hear the steering wheel popping. I wonder what the problem might be. Do I have to go to a Hyundai dealer or can I fix it at a nearby shop? (Blue 2010 Hyundai Elantra)
I believe I’ll try to read the codes first. The stability program includes a number of sensors that could cause the indicator to remain on. One that readily comes to mind is the brake switch. Popping Sounds or a knocking or clunking sound? Between the motor and column drive is a coupler that resembles a flexible plastic. known to break down over time. It has a TSB that addresses a number of different cars using the same coupler.
How can I turn the EPS light back on?
Restart your automobile after turning it off. The dashboard’s lights briefly turn on for a brief period of time. 4 seconds after the lights turn on, while the EPS light is still on, turn the wheel 45 degrees to the left and hold it there until the EPS light turns off.
The light usually goes out by restarting the computer. But if the light stays on, there might be a more serious issue at hand. Then, a more thorough investigation must be made.
Resetting the EPS warning light. the warning eps light.
- I’m sorry to hear that the car is having any issues, but I’d be happy to try and assist!
- Double check the modules for any fault codes if the light is still on. If you add any to the message, I’ll hunt for diagnostic and repair information.
- Disconnecting both battery cables and rubbing the ends of the cables together for two minutes may help modules reset. If the EPS light is still on at that point but no codes are setting, there may be a problem with the EPS module or the instrument cluster.
- Please let me know what you observe or if you have any queries as you look around.
This time, the eps light began flashing as soon as I turned the key. The wheel was difficult to turn at first but subsequently rotated effortlessly, but the eps light remained steady.
The EPS light turned on in my 2012 Hyundai Elantra without warning.
The EPS light turned on in my 2012 Hyundai Elantra. I wasn’t sure if the control module or the motor was to blame, so I needed to test them. I called the dealer to find out how much they would cost, but he stated they weren’t in stock. The serial number’s last 8 digits are 9u8191992, so check several auto shops as well. What ought should I do?
Mechanic’s Helper: What kind of lighting are we referring to, just to be clear?
Mechanic’s Helper: Before I connect you, is there anything else the Hyundai mechanic needs to know? You can be confident that they will be able to assist you.
Hello there, I’ll be assisting you; I’m so sorry to hear about the problems with the Hyundai. My name is ***** *****. I am aware of how frustrating dealing with electrical problems can be, particularly when they impact something as important as power steering. Whom am I now chatting with?
Okay, I’ll have to follow up with you or someone there the following week. portions accessible Why did the retailer inform me that they were unavailable? This seems like a typical issue.
It is a regular issue, however the dealer will no longer have the parts to sell as new parts. You may still purchase the parts online from various sellers, on eBay, or by purchasing a secondhand module or motor. I would advise checking with LKQ, a major national used parts retailer, to see if they can offer you any. However, before making any purchases, have the car scanned to determine which component of the EPS circuit has broken. It is likely that the control module has to be replaced because it houses the sensors and the motor, but you should make sure first.
Hi, it’s me once more. The power steering appears to be functioning OK, but the EPS light on the display is still on. What should be done? Paul, my daughter dropped off her car to me.
To see the code that is setting with the EPS light, you would need to scan the vehicle with a Hyundai competent scan tool. Although one of the torque or position sensors may be reading inaccurately, the EPS is still able to function. If that’s the case, you’d still need to replace the EPS module as it’s only available as an assembly, but first you’d need to use a scan tool to identify the problem.
Suitable Services
Hi Don. I appreciate you asking this question tonight. Your Hyundai Elantra’s EPS light is a warning light that signifies a problem with the electronic power steering system. The ignition and fuel systems will be turned off as a safety measure if the problem is severe enough, although in most circumstances it has no effect on the vehicle’s ability to start. A warning light inspection would be necessary to determine what is responsible for this light.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
How can I have my car’s EPS fixed?
Vehicles without hydraulic power steering will activate the EPS system, which stands for electric power steering. The steering angle sensor provides data to the EPS system’s control module rather than hydraulics. To offer power-assisted steering, this in turn regulates the steering motor.
It could be more challenging to identify the issue if the EPS warning light illuminates in your car because you won’t have any fluid levels to check.
You should thoroughly inspect all of the connections to the battery to look for any signs of wear or damage because it may occasionally be caused by a problem with the battery or alternator.
You may also experience an EPS light problem if you recently needed to jumpstart your car or if you disconnected the battery.
Sometimes the issue might be resolved by simply turning your car on and off again. Even if this works, you should still have your car checked at a nearby garage because there might be a deeper problem.
What does the Hyundai Elantra’s EPS light mean?
The most frequent cause of this issue with hydraulic power steering systems is a leak in the system that results in a low fluid level. An lighted EPS light might be present in electronic power steering (EPS) systems instead. There is no need to monitor the fluid levels because EPS systems do not require fluid to assist with steering.
What does Hyundai’s EPS mean?
The electronic power steering system in your car experienced a failure, as indicated by the EPS light on the dash of a Hyundai Elantra. In contrast to the outdated hydraulic systems that were utilized in the past, your car uses an electric motor to assist in steering.
How is my EPS light reset?
- Straighten the wheels on your vehicle.
- As instructed in the above-linked tutorial, short the SCS circuit.
- From the straight ahead position, turn the steering wheel 45 degrees to the left, and then maintain that angle.
- Switch the ignition on (III). The EPS indicator illuminates for 4 seconds before turning off.
Why does EPS malfunction?
Despite being a dependable car component, EPS occasionally fails, which compromises safety. Because of this, system failures require repairs. The driver might not notice an abrupt EPS failure. When error display is absent, this occurs.
A quick test can be used to determine the state of the EPS system:
- spin the wheel when the engine is off;
- Reverse the wheel after starting the engine.
When turning the wheel requires a lot of effort in both circumstances, compare the two impacts and further diagnostics are urgently needed.
On sometimes, EPS will cease to function when the speedometer is off. The most likely cause of failure in this instance is a speed sensor issue that affects both the speedometer and the power steering. It is necessary to replace the sensor or the cable since the speed sensor itself can become damaged.
In the event of a voltage decrease, EPS repair is required. Additionally, undervoltage might cause EPS to shut down, while overvoltage comes with a surge-voltage protector. A car battery, an alternator, or a circuit problem can all result in EPS failure. All of those auto parts should receive routine maintenance.
What triggers the EPS light to turn on?
When there is a problem with the vehicle’s electronic power steering system, the EPS light illuminates. The warning light will turn on to alert the driver that the vehicle has electronic power steering if the computer detects a problem with the system (EPS)
The meaning of an EPS failure
The instrument panel houses the electric power steering (EPS) Warning Light. When the light is on, it indicates that the EPS system is malfunctioning and that the car needs to be fixed.
The EPS warning light flashes briefly when the car is turned on, like all warning lights do. Only if the light is illuminated while the engine is running is it a problem.