How To Fix Eps Light Hyundai Elantra?

The electronic power steering system in your car experienced a failure, as indicated by the EPS light on the dash of a Hyundai Elantra. Unlike the previous hydraulic steering systems, your car employs an electric motor to assist with steering. This light on the dash will turn on when your ECU detects a problem with the power steering motor. To determine the root of the issue, you should have your car inspected by a mechanic or a Hyundai shop. A power steering motor failure is a possibility, but it’s also possible that it’s something as easy as a blown fuse or a loose wire. When it is malfunctioning, you will typically also notice that your steering feels heavier.

The EPS turns on when you insert the car’s keys. When I start the automobile, it goes off again. If there is a problem, kindly respond.

If the electronic power steering system (EPS) light is on in a Hyundai Elantra, there may be a problem.

I recently had a CVS joint installed on my passenger side, and as a result, I now have three lights: an EPS light, an ABS light, and a low tire pressure light.

How can I turn the EPS light back on?

Restart your automobile after turning it off. The dashboard’s lights briefly turn on for a brief period of time. 4 seconds after the lights turn on, while the EPS light is still on, turn the wheel 45 degrees to the left and hold it there until the EPS light turns off.

The light usually goes out by restarting the computer. But if the light stays on, there might be a more serious issue at hand. Then, a more thorough investigation must be made.

Resetting the EPS warning light. the warning eps light.

  • I’m sorry to hear that the car is having any issues, but I’d be happy to try and assist!
  • Double check the modules for any fault codes if the light is still on. If you add any to the message, I’ll hunt for diagnostic and repair information.
  • Disconnecting both battery cables and rubbing the ends of the cables together for two minutes may help modules reset. If the EPS light is still on at that point but no codes are setting, there may be a problem with the EPS module or the instrument cluster.
  • Please let me know what you observe or if you have any queries as you look around.

This time, the eps light began flashing as soon as I turned the key. The wheel was difficult to turn at first but subsequently rotated effortlessly, but the eps light remained steady.

Suitable Services

Hi Don. I appreciate you asking this question tonight. Your Hyundai Elantra’s EPS light is a warning light that signifies a problem with the electronic power steering system. The ignition and fuel systems will be turned off as a safety measure if the problem is severe enough, although in most circumstances it has no effect on the vehicle’s ability to start. A warning light inspection would be necessary to determine what is responsible for this light.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our

What does the Hyundai Elantra’s EPS light mean?

The most frequent cause of this issue with hydraulic power steering systems is a leak in the system that results in a low fluid level. An lighted EPS light might be present in electronic power steering (EPS) systems instead. There is no need to monitor the fluid levels because EPS systems do not require fluid to assist with steering.

How can I have my car’s EPS fixed?

Vehicles without hydraulic power steering will activate the EPS system, which stands for electric power steering. The steering angle sensor provides data to the EPS system’s control module rather than hydraulics. To offer power-assisted steering, this in turn regulates the steering motor.

It could be more challenging to identify the issue if the EPS warning light illuminates in your car because you won’t have any fluid levels to check.

You should thoroughly inspect all of the connections to the battery to look for any signs of wear or damage because it may occasionally be caused by a problem with the battery or alternator.

You may also experience an EPS light problem if you recently needed to jumpstart your car or if you disconnected the battery.

Sometimes the issue might be resolved by simply turning your car on and off again. Even if this works, you should still have your car checked at a nearby garage because there might be a deeper problem.

How is the EPS light reset?

Switch the ignition on (III). The EPS indicator illuminates for 4 seconds before turning off. 5. Return the steering wheel to the forward-facing driving position and let go of the wheel within 4 seconds of the EPS indication turning off.

Why did the EPS light turn on?

When there is a problem with the vehicle’s electronic power steering system, the EPS light illuminates. The warning light will turn on to alert the driver that the vehicle has electronic power steering if the computer detects a problem with the system (EPS)

On a Honda Accord, how do you turn off the EPS light?

The DTC is not remembered if the car’s CPU cannot be turned on when the EPS light illuminates. The EPS light remains on if the code is not retained. By cutting the battery, memorized codes cannot be removed. After the ignition and EPS are both switched off, the memorized codes 22, 23, 64, and 66 will still be in effect. You cannot fix a Torque Sensor issue, for instance, by just turning off the engine.

Here’s a method to try to get rid of the code that the system has saved:

  • From a straight posture, you can turn the steering wheel 45 degrees to the left.
  • then engage the ignition. The EPS light ought to illuminate for 4 seconds before turning off.
  • Return to the straight position as soon as the EPS light stops flashing. The EPS should turn back on.
  • The EPS should turn off after 4 seconds if you immediately move the wheel 45 degrees to the left.
  • After four seconds, immediately put the wheel back in the straight position, and the EPS light should start to flash twice. If there is no blinking, the code is still present.

Is EPS repairable?

The EPS will briefly recover if the engine is stopped and then restarted, but this is only a temporary fix. It is strongly advised to perform diagnostics and repairs as soon as possible in order to get the EPS back to normal operation.

What does my car’s EPS stand for?

The car can still be driven even if the engine is off or the power steering system fails, although it will need more effort.

The power steering control unit measures the torque of the steering wheel and the speed of the vehicle to order the EPS.

As the vehicle’s speed grows, the steering effort gets harder, and as it slows down, it gets easier.

Have the system checked by a professional if you detect any difference in the amount of effort needed to steer during routine vehicle operation.

a skilled workshop. Kia advises customers to go to a licensed Kia dealer or service provider.

While driving normally, the following signs could appear:

Immediately after turning the ignition switch on, the steering effort is significant. This takes place as the EPS system completes the

diagnostics. The steering effort will revert to normal after the diagnostics are finished.

The EPS relay may make a clicking sound while the ignition switch is in the ON or LOCK position.

When the car is stopped or moving slowly, you could hear motor sounds.

For the purpose of preventing fatal accidents, steering assistance is used when an anomaly in the electric power steering system is discovered.

The functions will halt. The warning light on the instrument panel turns on or blinks at this point, and the ability to control

There won’t be steering. Please check as soon as you move the car to a secure area.

If the steering wheel is continuously turned while the car is stationary, the steering effort increases. To be sure, after

The alert light will turn on in the instrument cluster if the electric power steering system is not functioning properly.

It could become challenging to manage the steering wheel or behave strangely. In this scenario, get an expert to inspect the system.

Unusual sounds may happen when you handle the steering wheel in a cold environment. The noise will end as the temperature rises.

When the EPS light is on, can I drive?

I’m here. You should be able to continue driving your Hyundai until your appointment as long as there are no adverse side effects and you feel it is safe to steer. Thank you for your inquiry!

Hello, and I appreciate your letter. The EPS (electric power steering) warning light indicates a problem with the system that the computer has identified. Your technology differs from conventional power steering systems in that it does not use fluid and gears. That could indicate a problem as minor as a filthy electrical connection, serious as a faulty sensor, as minor as a whole system failure. You can assess the problem’s seriousness the best. Do you experience any power steering problems? Has the steering grown more difficult or jerky, or does the system make any odd noises? If not, it is probably safe to drive the car for brief, modest distances. Remember that the problem could get worse and turn into something that could leave you stuck. Of course, there is a serious safety problem here.

How is a warning light for electric power steering fixed?

All you have to do to get the light to reset is to turn off and restart your engine. Most of the time, it should turn back on, and this just shows that it may have believed there was a problem because of an error in the computer system.

Is driving possible without EPS?

The motor in the automobile I recently purchased, which has fully electric power steering, is going to fail. Because I currently lack the funds to fix it, it is aggravating. But I’m concerned that if I keep on driving, I’ll only make the situation worse. Can driving a car without power steering cause damage to it?

In less than two minutes, find out if your auto insurance is being overcharged.

Ah, the strength of electrical elements. As cars transition from mechanical to electronic components, drivers are learning that it is considerably more bothersome (and expensive) to address these issues.

The good news is that your automobile shouldn’t be damaged if you drive without electric power steering. Even without power steering, you can still turn the wheel, at least long enough to pull over to the side of the road. (You’re just kicking yourself for skipping the gym; the steering wheel will be much harder to turn.)

It is true that if your car uses traditional hydraulic power steering, the fluid pump could malfunction and cause damage. But if the fluid pump for the electric power steering fails, you won’t experience that issue.

In any case, you shouldn’t put off power steering maintenance. You won’t be able to steer swiftly without it if you need to avoid a potential obstruction on the road, even if you’ve never skipped a day at the gym. This poses a significant risk.

You might wish to research car insurance that includes roadside assistance or covers major repairs because it seems like your vehicle is older. Jerry can assist you in locating an insurance that meets your needs without costing too much.

Jerry is a free insurance price comparison software that searches more than 50 insurance providers for the best deals. You will receive quotes immediately, and agents are always a text message away if you ever have any questions. The typical user of Jerry saves $887 annually on auto insurance.