Since last Wednesday, whenever I turn my car on cold, the message “Check BSD System” appears (it never pops up on a warm start). For anytime between a few seconds and five minutes, it flashes an orange exclamation point as a warning on the supervision cluster. Then it vanishes. BSD is inoperable while the warning is present. But when it vanishes, it functions perfectly.
I took it to the dealer on Friday, and they discovered and eliminated a code indicating battery overvoltage. then a short drive was made to see whether the code came back. Not at all. Due to their lack of thorough investigation, they gave me the car back, and of course the mistake reappeared the following day. Simply said, a code was cleared. When I called the dealer, I let them know that I was disappointed that they hadn’t taken the problem seriously the first time, and I requested an appointment for Wednesday.
I want to know if there is anything I can check to see if I can fix this on my own despite the fact that the owner’s manual simply states to “take it to your dealer if you get this issue.”
The identical problem affects my 2015 sport model. I start the car, shift to D, and then turn off the ignition while the gear is still in Drive whenever I need to clear the Check BSD problem. I then re-engage P and restart the ignition when the engine has stopped.
The error warning is now gone, and the BSD is operating normally. Sometimes you may need to try the procedure more than once before it takes.
In This Article...
My 2015 Hyundai Sonata Limited displays the message “check BSD…
My 2015 Hyundai Sonata Limited frequently flashes the “check BSD System” warning light, sometimes 34 times in a row. The more alarming it becomes outside as the temperature rises, it appears to be connected in some way to heat. It eventually stops and won’t resume until the car is started again. In the winter, it virtually ever happens, but in the summer, it becomes a significant issue. Although not nearly as frequently as the BSD system, it will occasionally also alarm the TPS system. does not appear to have any impact on how the car operates.
Mechanic’s Helper: Does the warning light flash or blink, or does it remain steady? How soon did you become aware of it?
It only appears for a split second before going away. It has been to the dealer three times and has been going on for a long time, but they have never seen it actually do it.
Mechanic’s Helper: Before I connect you, is there anything else the Hyundai mechanic needs to know? You can be confident that they will be able to assist you.
Hello there, I’ll be assisting you; I’m so sorry to hear about the problems with the Sonata. My name is ***** *****. I am aware of the aggravation such warnings might cause. This is a typical problem with certain models. Radar sensors mounted on the back bumper power the blind spot detection system. Although it seems like your sensors are broken, occasionally they need to be programmed in order to read properly. The calibration is something that needs to be done by the dealer, however I do advise it to see if it helps. If not, replacing the sensors can be done next.
I’ve visited three various vendors. They failed to identify the issue. Is the cost of replacement high?
Okay, I see. If the problem is sporadic, it can be difficult. Around 600 will be spent on new sensors, their installation, and calibration.
What to Do If Your Hyundai’s Blind Spot Detection System Isn’t Working
Now that the Hyundai blind spot detection system isn’t working, you have an issue. What comes after that?
It can be really unsettling if this is a problem you are now experiencing. In order to drive safely and avoid obstacles, you need this blind spot detecting system. You rely on the BSD to notify you when you are approaching another vehicle or any potential obstacles your car might run against.
In order to fix the BSD system in Hyundai automobiles, a reset of the Hyundai BSD system or knowledge on how to fix the BSD system is required. How does it work? Read on to discover more.
What does “check BSD system” indicate on your car’s dashboard?
The “check bsd system” indication is one of the danger lights that could display on your dashboard. This suggests that the blind spot monitoring system is malfunctioning. Another possible phrase is “Check Blind Spot Warning System.” The culprit is frequently nothing more than signal interference.
How does the Hyundai Sonata use BSD?
It use two magnetic waves to calculate the distance and speed from the pursuing cars. The rear bumper is equipped with radar sensors. The BSD/BCW recognizes moving vehicles in the blind spot area. and sounds an alert (visual and audible)
What does Hyundai Santa Fe’s BSD stand for?
After replacement, this feature resets the radar for blind spot detection. Any missing calibration DTCs will be cleared during this calibration process, enabling the radar sensors to complete the self-alignment process. While the vehicle is being driven, the sensors continuously self-align.
Why has Hyundai cancelled my BSD?
The trailer may interfere with the operation of a vehicle’s Blind Spot Detection (BSD) system, preventing the BSD functionality from working. When this happens, the instrument cluster of the car displays the message “BSD canceled.”
What does BSD in an automobile mean?
Drive with confidence thanks to the Blind Spot Detection (BSD) warning system, which alerts you when something moves into your blind spot to your rear or side.
The outer corners of the rear bumpers are home to two radar sensors that look for vehicles entering your blind spots. They have a detection range of 4 meters on each side and up to 70 meters in the back. When vehicles are identified within the system border, Blind Spot Detection, which is activated at vehicle speeds above 30 kph, flashes a first stage warning light on your side mirror. If you use your indicator to change lanes, a second stage alert sound will then play after this.
BSD enables you to be more aware of your surroundings, but be careful to just use it as an addition to your regular safe driving techniques. Drive normally and consider it an additional measure of safety.
The Limited edition of the Optima presently has blind spot detection.
How can I activate the blind spot detection on my Hyundai?
For various driving situations, intelligent driver safety features like Blind-Spot Assist can also be modified or switched on and off. Controls are located either under “Settings” on the center console touch screen menu or as a manual on/off switch to the left of the steering wheel.
What location does the BSD sensor have?
Understanding how advanced driver assistance systems (ADAS) function is essential to being able to diagnose a problem with the system. You can more accurately determine the system’s potential causes of failure by being aware of what is happening internally. This will avoid replacing components that are not the root of the system’s problem. Let’s examine how a blind spot detection system functions from the inside out.
The radar sensors in the vehicle’s back are used by the blind spot detection system. These sensors are typically located on either side of the rear bumper. The sensor may occasionally be located somewhere else, such as in the tail light or the quarter panel under the bumper cover. Ultrasonic park assist sensors can also function as blind spot sensors on a small number of cars.
Radio waves are sent via radar sensors and are reflected off of objects to operate. The length of time it takes for the radio wave to return tells us how far away, how big, and which way the object is moving.
When there is an object in the blind spot, an indication on the side rearview mirrors will often light up. Additionally, the indicator light may be found on the A-pillar trim or the door trim.
The radar sensors are typically configured as a master module and slave module. The master module, in turn, communicates with other systems via the slave module. The slave module will alert the master module to the presence of an object if it is detected. Typically, the master module will then communicate with the door module to activate the blind spot warning light.
Determining how the system works can speed up the troubleshooting process. Installing components that don’t actually solve the issue will be prevented by knowing which system component to test.
BSD Cancelled: How to Fix It?
I frequently receive the message “bsd canceled.” when the weather is clear and the car is clean. occurs either when the BSD button is switched on or off. Turning off the car is the only way to silence the alert. The notice is persistent and fills the full dashboard panel. I visited two dealers with my 2015 Genesis. Because “they can’t reproduce the issue and there are no error codes,” they both told me they couldn’t fix it. I spoke with Hyundai customer service. They also said that there is nothing they can (or are willing to do) after wasting hours of my life. This problem is widely discussed in the forums, so I know it is well-known. This dreadful BSD feature affects not only Genesis but all Hyundai automobiles. Customer beware!
Are you looking to improve and modernize your Genesis luxury sport car? You can find anything you need right here in our topic store, and orders are dispatched right away.
Is blind spot monitoring available on the Hyundai Tucson?
The all-new TUCSON provides peace of mind for the entire family by including Hyundai Smart Sense, a state-of-the-art active driver assistance system package. The occupants are in good hands because the entire vehicle is packed with sensors, cameras, and radar to identify obstructions and avoid collisions. Additionally, there are more ways than ever for drivers to keep an eye on their surroundings while driving, keeping them safe.
In a perfect world, drivers would pay complete attention to the road. However, this can be temporarily jeopardized if there is a fussy child in the back seat. When the driver’s attention shifts back to the road in front of them, they might not notice the car in front of them has stopped completely until it is too late. However, the all-new TUCSON automatically decelerates and brakes for them if necessary, ensuring greater safety for their family, as opposed to them having to swiftly apply the brakes and perform an emergency stop. A forward-facing camera is used by the new Forward Collision-Avoidance Assist (FCA) to scan the road. The FCA alerts the driver if the vehicle in front of it suddenly slows down or if it senses a potential for a collision, such as a stopped car, a pedestrian, or a bike. Following the initial warning, FCA automatically assists with emergency braking if the likelihood of an accident rises. An upgraded Junction Turning function with a radar specifically calibrated to help prevent frontal crashes while turning left at intersections has increased FCA’s range of protection (in left hand drive countries).
Drivers are unable to see the entire stretch of road in front of them due to blind spots. Blind-spot Collision-Avoidance Assist (BCA) is a function of the brand-new TUCSON that helps drivers before they merge or change lanes. When BCA detects another vehicle, it uses rear corner radar to generate an alarm that is displayed on the external mirrors. Drivers will always be aware of when it is safe to switch to the next lane. However, BCA will still keep children safe even if the driver unintentionally ignores these visual alerts. The all-new TUCSON will protect them and their families by issuing an audible and visual warning in the instrument cluster and triggering differential braking in the event of a collision risk.
The brand-new Blind-spot View Monitor (BVM) on the all-new TUCSON, however, takes things a step further by showing real-time video from both sides of the car. The instrument screen shows the appropriate rear view down the left or right side when the driver signals a lane change. Drivers will have a clearer view of the road for safer driving, whether traversing congested city streets or speeding around on the freeway.
Because drivers must turn around and scan their surroundings for obstacles, backing up can be difficult. Drivers may be able to see what is behind them with the rear-view camera, but they cannot predict crossing traffic. This is true while pulling out of a parking space in a crowded lot. When reversing, the brand-new TUCSON’s Rear Cross-traffic Collision Assist (RCCA) detects vehicles crossing the road and instantly applies the brakes. The probability of a rear collision is decreased, and drivers and their passengers are safeguarded.
During reversing maneuvers, Surround View Monitor (SVM) uses cameras to provide 360-degree visibility. Toys left on the driveway stay intact and indoor pets may rest peacefully because of SVM.