The battery in your Hyundai key fob is simple to change. A replacement CR 2032 3V battery is all that is required. They typically cost between $3 and $5 for a pack of 5. Wearing latex gloves is advised because you will be contacting a motherboard during this process, which could result in unintended harm.
- Remove the emergency key from the fob’s base.
- Between the release button and the key slot, insert the key.
- Turn the key until the fob pops open as if you were unlocking a door.
- Open the fob while facing the buttons downward (otherwise they will fall out).
- Remove the barrier and motherboard, then set aside the button-side of the fob.
- Remove the dead battery from its mount using the key.
- Place the + side of the new battery in its bracket.
- Replace the fob’s button-half, motherboard, and barrier.
- Set the release button peg in the appropriate hole.
- Reassemble the fob with a snap.
You’re done now! Press any button to put your Hyundai Smart Key to the test. If all was done correctly, a tiny red light should flash over the unlock button.
In This Article...
He seemed to be extremely familiar with the Sonata, and he told me the smart key had a rechargeable battery.
Simply drive after inserting the key into the center console’s slot to start the battery.
Registration and pairing of the NFC Key Card
It is recommended that you always keep your NFC (Near Field Communication) Key Card on hand as a backup key in case your smartphone experiences a power outage or other problem. The card resembles a hotel key card and may therefore be conveniently stored in a wallet or billfold. The NFC Key Card will also need to be associated and registered with the automobile in order to function as a backup digital key. If the card hasn’t already been associated with the car, please follow these steps:
- Start your car.
- Make sure the Hyundai Digital Key app is installed on your primary smartphone and that it is in the car.
- Pick Pair NFC Key Card through BLE from the side menu in the app.
- the wireless card changer with your card in it.
- There will be automated pairing.
Follow these steps to finish the registration procedure for models having a navigation screen:
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
How can my Hyundai key fob be reset?
- As soon as you get inside your Hyundai, check that all the doors are closed.
- Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
What occurs if the battery in a car smart key dies?
My car’s key fob seems to be coming in and going out, though. I know I merely need to replace the battery, but I don’t have much free time. What if the key fob entirely fails while I’m operating the vehicle?
In less than two minutes, find out if your auto insurance is being overcharged.
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
If time is of the essence, you should be aware that changing the battery in your key fob just requires two minutes, albeit you will need to visit a general store or pharmacy to obtain the battery.
Why not change the battery in your car insurance at the same time as you replace the one in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
Hyundai vehicles can be operated without a key fob.
Once the engine is going, the automobile will still work without the key fob. Additionally, switching from park to drive is trouble-free even when the key is not available.
Why isn’t my car key working?
The most frequent issue with these automobile key fobs is that the batteries eventually run out, in which case switching out the battery should resolve the issue. Other key fob remote issues are trickier to resolve, but they are still solvable.
How do I get my car key fob to work again?
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position.
This notifies the electronic control modules in your automobile that the signal is coming from your key in the ignition, and it then saves the information.
Can you recharge a key fob?
My key fob isn’t reliably unlocking my car and looks to be running low on power. I wish I knew how to give it more juice, though! How should a Nissan car key be recharged?
A small luxury that may improve the entire car-owning experience is a key fob that works smoothly. Nissan key fobs, however, cannot be recharged. Instead, you must swap out the battery.
Nissan key fobs typically use CR2025 button cell batteries, which are available for roughly $5 from retailers or dealers. To make sure you’re obtaining the correct model, check your owner’s handbook before you purchase a new battery.
The instructions for replacing the battery are as follows after you have the appropriate replacement:
- Take the extra metal key out of your fob. On the back of your key is a little slider that can be used to release this.
- Put a flathead screwdriver where the key was and twist to gently pop open the plastic shell.
- Pull the dead battery from its container using the screwdriver.
- Place a brand-new battery in it, negative side up.
- Change the housing and backup key.
You’ve now successfully changed the key fob’s battery! If the issue persists, get in touch with your local Nissan dealer and ask them to reset your key.
Jerry can help you save on auto insurance while you wait for them to fix your key. The Jerry app, a registered broker, will help you compare customised rates from more than 50 leading companies like Progressive and Nationwide for nothing. Jerry can assist you in purchasing your new coverage and even in canceling your old insurance when you discover a better option.
How can I tell if the battery in my key fob needs to be changed?
When the battery in the fob gets weaker, the transmitter’s range decreases. Your range is deteriorating if you find that you need to be much closer to your automobile than usual. This serves as a reminder to replace your battery. Other signs comprise:
- If your key doesn’t signal at all
- If you have to click the button several times before your car responds
- If your key remote behaves erratically or inconsistently
Why doesn’t my automobile recognize my key fob?
Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.
What is the price of a key fob battery?
These batteries typically cost $10 or less, however some fobs need two. Since it just takes a few seconds, battery specialists and dealers frequently replace the batteries for free.
Why won’t my key fob function when I change the battery?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
How long does the battery in a key fob last?
How Long Are Key Fobs Good For? The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years.
Can I use a dead key fob to start my car?
The Family Handyman claims that you can still start your car even if the battery in your key fob dies. Put the metal key back in the fob after using it to unlock your doors; then, instead of pressing the “start” button with your finger, use the fob. Many manufacturers utilize this backup device to make sure the car can start even if the key fob is dead.
Now, the Mini has a slot where the key fob can be inserted to start the vehicle. But at this time, this design seems a touch dated. This is why it’s always a good idea to consult your car’s manual.
Some Mazdas and a few other vehicles may have an actual key slot along the steering column, according to the Family Handyman. The least frequent method to start a car with a dead key fob is this, though.
If your key fob dies, can your car still start?
The majority of modern vehicles and light trucks start their engines with a Start button rather than an ignition key. Before the engine to start when you press the Start button, the Smart Key fob must send a coded signal to the button. If nothing happens, it could indicate any of the following:
Your key fob’s battery has to be replaced since it is either dead or functioning poorly when communicating with the keyless entry system.
The actual key fob is broken. This will necessitate getting a new key fob, either from the dealership or an aftermarket fob (which will have to be reprogrammed to your vehicle by a car dealer or certified locksmith).
The transmission gear selector is not in Park, you are not depressing the brake pedal, the brake pedal position switch is broken, or both. On automobiles with manual gearboxes, the engine won’t start until the clutch pedal has been fully depressed.
The Start button or keyless entry system is not working properly. The Start button may not be creating a signal when you press it down, or the keyless entry system may be unable to read the signal from the key fob due to an antenna or wiring issue. These issues will need to be diagnosed further, and you’ll probably need to have your automobile towed to a shop or a car dealer for repairs.
Your car’s battery is nearly dead or very low. Before your engine cranks and starts, this might need a jump start.