Find out how to change the wipers on your Hyundai Elantra. Below, pick an Elantra year. For the precise wiper blade connector on your Hyundai Elantra, we have tailored these instructions.
In This Article...
5 simple methods to change your windshield wipers on your own
- Determine the proper wiper size. You can locate
- Wiper arms should be raised until they are parallel to
- Locate the metal hook OR remove the pin from the blade.
- Slide the new blade into the arm to attach it.
- the second wiper blade in the same manner.
- You’re finished!
For a 2018 Hyundai Elantra, what size windshield wipers am I going to need?
The wiper blade sizes for the 2018 Hyundai Elantra are a 26″ driver’s side blade and a 16″ passenger side blade.
How is a wiper on the passenger side replaced?
- Step 1: Purchase wiper blade refills in the correct size. The wiper blade length should be measured.
- Slide remove the old wiper blade in step two. Old windshield wipers should be removed.
- Step 3: Insert the new windshield wiper blades.
On a Hyundai i30, how do you lift the windshield wipers?
- The wiper lever should be moved downward and held to the within 20 seconds of the engine being turned off.
- You can now remove the wipers from the windshield.
What does it cost to change the wipers?
Replacement windshield wiper blades typically cost between $23 and $38. Between $8 and $12 is the expected cost of labor, while $15 to $26 is the estimated cost of parts. Taxes and fees are not included in the estimate.
Can you replace the wiper blades on your own?
You simply need your hands to replace the windshield wiper blades on the majority of autos. Find the wiper blades on your automobile, then raise the wiper arms. Under spring stress, they will typically hold themselves in place, giving you space to quickly change the blades. To access the arms on some cars, you might need to lift the hood.
The next step, which you must work out independently, is how to physically remove the wiper blade from the arm. There are numerous manufacturer designs for this connection, but the majority require a little amount of fumbling and little bending to remove the wiper. For instructions on how to remove the blades from your automobile without breaking anything, we advise consulting your owner’s manual.
When you take the wipers off, drive very carefully. “I always protect the windshield with anything when I do a set of windshield wipers, whether it’s on my personal truck or a McLaren F1,” Hines says.
The metal wiper arm is prepared to make contact with the glass while the wiper blades are not in use. It could slap down and fracture the windshield if you unintentionally bump against it when you are switching out the blades. Hines claims that he “never likes to let the arm stand in the air without a wiper blade on it.” “I’ve been on the verge of tears from breaking windshields,”
We advise laying down a towel or two to serve as a barrier between the windshield and the wiper arm. In this manner, if the arm does unexpectedly swing downward, the towel will be hit rather than your priceless windshield. You definitely don’t want a fast DIY project to turn into a $300 windshield replacement.
Lay your replacement set of wipers next to the ones you just removed. Verify that both have the same size, length, and connecting points. After making sure your new wipers will fit, install them by following the same procedure you used to remove the old wipers. Put the wiper arms back onto the windshield after attaching the new wipers to each of them.
To verify sure your wipers are operating as intended, get in your car, turn on the accessories, and turn them on. Make sure they’re not contacting any area of the automobile that they shouldn’t be, such the windshield frame or cowl. Congratulations, you’re done if they’re not.