- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly.
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component.
- Repeat on the other side in step 6
In This Article...
What does the Hyundai Elantra’s brake light mean?
Braking System Alert Light indicates that the brake system is broken or that the brake fluid level is low. Additionally, when the parking brake is not released, this light illuminates.
What is the cost of changing a tail light bulb?
Anyone can learn how to replace a broken brake light. By changing the bulb yourself instead of going to the store and waiting for the service to be done, you can save $20 in labor costs and travel time. A replacement bulb costs about $10.
Can you change the bulb in your taillight on your own?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
The tail light can AutoZone replace?
AutoZone will they replace brake lights? Although AutoZone doesn’t really provide brake light replacement services, our staff can help you with any inquiries you may have, aid you in locating the necessary supplies to get started, and perhaps even lend a hand.
The Hyundai Elantra 2017 has front-wheel drive.
Elantra is a front-wheel-drive vehicle for 2017. Several different engines are available for it, all of which have four cylinders. 147 horsepower is offered by the Elantra SE and Limited variants, and 173 horsepower is offered by the Elantra GT.
What does the Hyundai automobile with the key light mean?
If this light is solid, the immobilizer in your key has been recognized by your car, allowing you to start the engine. If this light is blinking, the immobilizer system isn’t working properly, and you should take your car to the nearby Hyundai repair center. Ignitor Light for the Immobilizer
Why do my Hyundai Sonata’s brake lights not function?
The mechanic will bring a multimeter while inspecting the electric parts of your car, particularly the fuses and relays, to help them identify which particular part has failed. The mechanic will start by looking at the rear of the vehicle for any obvious damage, such as frayed or loose wiring and damaged tail light covers. The mechanic will next start to look at each component along the electrical circuit if there isn’t any obvious damage.
By checking at the fuses, the mechanic will start examining the various electrical parts of the car. He or she will take out the appropriate fuse for the tail lights to check if it is blown if they suspect a blown fuse. In such case, the mechanic will swap it out for a fuse that is properly rated for the amperage.
The mechanic should determine whether the unlit bulb is burned out if only one of the tail lights appears to be out. Bulb failure and replacement are inevitable over time. The mechanic will examine the unlit bulb’s filament to see if it is broken. In that case, a new bulb will be installed in lieu of the damaged one.
The mechanic will then examine the matching relay for the tail lights if it appears that the bulbs and fuses are in good operating order. The mechanic can measure the relay’s resistance using a multimeter. The mechanic will replace it and rewire it to the current connections if it is not operating properly.
The brake light switch should be checked by the mechanic if the tail lights appear to be operating OK but the brake lights are not. The mechanic will replace the old switch with a new one if the brake light switch is not reacting to the brake pedal. After that, the mechanic should ensure sure the brake lights are operational and responding to the new switch.
Any time a repair is required, the technician will see to it that all required work is done and that the new components work properly. A code reader/scanner will be used by the repair to erase any error codes that may have been set off by problems with the taillights.
Is the brake light bulb the same in all cars?
It’s time to install the brake light bulb you choose after making your selection. If you’re feeling confident, you can replace the brake light bulb yourself at home on many cars because it’s not particularly difficult. Any queries you may have can be answered by your auto electrician.
Here is a step-by-step instruction manual for changing your brake light bulbs. Please remember that this is simply a general overview. Since every automobile is unique, some bulbs might not be able to be changed in this manner. We strongly advise you to consult the car manual or speak with your auto electrician if you have any questions.
What distinguishes the numbers 1157 and 2357?
The 2357 bulb has a shorter life expectancy than the 1157. The high filament of the 2357 bulb is substantially shorter than that of the 1157, with the 2357 rated at 400 hours compared to 1200 hours for the 1157. The low filaments have the same life expectancy value of 5000 hours.