On Hyundais with four-cylinder engines, the original spark plugs installed are NGK or Denso iridium coated spark plugs.
Two highly regarded spark plugs that are compatible with Hyundai automobiles are given below.
The spark plugs in a 2016 Hyundai Elantra should be changed every 84 months or 105,000 miles, according to the owner’s manual. Keep in mind that the spark plugs may survive longer or require replacement as soon as 60,000 miles, depending on your driving habits and the environment. The spark plugs’ original coating is iridium.
In This Article...
When must my Hyundai Elantra’s spark plugs be changed?
30,000 miles every Your Elantra’s spark plugs need to be replaced at about 95,000 miles, and you might want to consider replacing the coolant at 120,000 miles.
Can I replace my own spark plugs?
For a four-cylinder engine, changing spark plugs takes approximately an hour, and you can do it yourself and save at least $100 in labor costs. Most of the time, it’s a straightforward task that will help to maintain optimum performance and the best gas mileage.
How frequently should Hyundai change its spark plugs?
60,000 Miles a Year As with the other Hyundai models mentioned, replace the coolant every 120,000 miles and the spark plugs after 95,000 miles.
How can spark plugs be checked without removing them?
- affix an ignition wire tester to the spark plug. The tester’s other end is connected to the spark plug that is currently installed in your engine.
- Activate the ignition.
- Watch the transparent sides of the tester while you start the engine or, if it won’t, simply flip it over. You can be certain that there isn’t a spark at the crucial spark plug tip if there isn’t a visible spark or glow. Does this indicate a defective plug? No, not always. Yes, a faulty spark plug is a possibility, but an ignition system malfunction could also be to blame for a lack of spark.
What occurs if spark plugs aren’t changed?
The following specific problems are present: • Reduced fuel efficiency • Unresponsive acceleration • Unstable idling or stalling • Engine operating more roughshod or not at all
Lack of spark from the spark plugs causes incomplete combustion of the air/fuel mixture, which reduces engine power and, in the worst case, causes the engine to not start. Deteriorated spark plugs will interfere with other engine components that provide electricity, increasing the likelihood that those components may fail.
Compared to modern cars, ancient cars’ engines were less sophisticated. In the past, you could replace the spark plugs by yourself. But as more sophisticated technologies like computers are added to modern vehicles, there are more instances of vehicles where other engine components prevent the sparkplugs from being accessed.
It is rather easy to change the spark plugs. They are simple to unscrew. However, if any debris gets into the area where the spark plug was removed, it will harm the cylinder’s interior, so take this into consideration.
Additionally, the thread of the cylinder head could be harmed if the spark plugs are screwed in too firmly. If this happens, it will be necessary to replace the cylinder head, which is an expensive repair. The same caution is urged.
Spark plugs are one component of an engine that will soon be obsolete, but for the time being they are a crucial component that guarantees efficiency. It is advised to replace them before their performance declines.
How can I tell if my spark plugs need to be replaced?
- Engine sputtering One or more of your spark plugs may not be burning properly if your engine is misfiring, which is a clear symptom.
- low fuel efficiency Your engine’s spark plugs burn fuel effectively when they are functioning properly.
- difficulty starting.
- Slowing down the pace.
- A rough idle
What does it cost to change the spark plugs?
My Honda’s engine need new spark plugs. I won’t be able to accomplish this alone; I am not even remotely handy. What is the price of replacing spark plugs?
In less than two minutes, find out if your auto insurance is being overcharged.
We appreciate that you are putting your car’s health first. In general, a mechanic will charge between $115 and $200 to replace a spark plug.
With spark plugs, the price of parts is low.
Depending on the type required, plugs might cost anywhere from $5 to $20 each. You will need between four and eight plugs because you need one plug for each cylinder in your engine.
Labor time makes up the remaining expense. Expect to pay for one to two hours of labor even though this is not a particularly laborious procedure.
Take a few minutes to increase your auto insurance coverage while you’re waiting at the mechanic for your spark plugs to be changed. Download Jerry if you need assistance.
Jerry is a mobile insurance brokerage application created with the goal of reducing your insurance costs. It’s simple to acquire excellent coverage at a reasonable price with the help of the app, which offers you a lengthy range of customised insurance estimates.
Do I have to unplug the battery to replace the spark plugs?
When trying to replace the spark plugs in their car, this is a common query that individuals have. The battery does not need to be disconnected in order to replace the spark plugs, is the response. You may just detach the spark plug from the engine and then remove the spark plug wire from it.
Additionally, when working on anything electrical, it’s crucial to disconnect the negative connection of your automobile battery. Any mishaps will be less likely as a result. Before changing your spark plugs, make sure the engine of your automobile has completely cooled. By doing this, it will be simpler to remove the plugs and the ignition coil boot or spark plug wire.
Should every spark plug be changed at once?
Should All Spark Plugs Be Replaced At Once? A: In order to achieve uniform performance levels, it is generally preferable to replace all plugs at once.
If your spark plugs are damaged, can you still drive your car?
It’s always advisable to adhere to the manufacturer-recommended maintenance schedule when it comes to car maintenance. To determine when to change your spark plugs, check the advised maintenance schedule for your car.
Fortunately, spark plugs don’t deteriorate rapidly. They normally last 80,000 miles before needing to be replaced. However, if you experience any of these signs, it’s time to get an engine tune-up and have your spark plugs examined.
Don’t put it off; driving on worn-out or damaged spark plugs might eventually lead to engine damage. Make an appointment now for a thorough inspection from one of our highly skilled technicians at your neighborhood Firestone Complete Auto Care!
Should I switch to spark plugs instead of ignition coils?
Spark plugs and ignition coils work in tandem. The other cannot work correctly if either one fails. So, should spark plugs be used in place of coil packs? It varies.
The spark plugs are the part that needs to be changed the most frequently along with the ignition coils. Coils can be overworked by worn spark plugs, and the effort needed to replace both parts is frequently overlapped. It is advisable to repair both parts at once if your worn-out spark plugs caused your ignition coils to fail.
However, unless there are indications that they are malfunctioning, replacing your ignition coils at the same time that you replace your spark plugs as part of routine maintenance is not necessary.
It is advised to replace the wires in ignition/spark plug systems if they look to be brittle, worn, or broken. If moisture (such as an oil leak) has harmed the ignition coils, the moisture source should also be fixed in order to prevent the problem from reappearing too soon.
The moment you notice a problem with your ignition coil, call a professional. Should I replace my ignition coils with spark plugs? is one of the first queries you should put to your expert. Have your mechanic check your car to see whether the ignition coils and spark plugs need to be replaced.
What is the most effective tool for removing spark plugs?
Just a few tools are required to replace the spark plugs in your car. The most crucial equipment is a spark plug socket and an extension for a socket wrench. There are two sizes available for spark plug sockets: 5/8 inches and 13/16 inches. The rubber insert included in most spark plug sockets keeps the plug firmly in place.
If it’s tough to get to your spark plugs, you could also require a universal joint. The wrench can be turned in one axis and converted into a rotation around another axis using universal joints, which are articulated joints. A universal joint might be useful if you can’t fit a wrench and extension in the area surrounding your spark plugs.
It’s crucial to avoid overtightening the spark plugs when changing them. The threads in the cylinder head or the spark plug may be harmed if it is overtightened. Make sure you don’t overtighten your plugs by using a torque wrench. The torque you apply when twisting a torque wrench is indicated via a gauge on the tool.
While the majority of contemporary spark plugs are pre-gapped from the factory, having a gapping tool on hand is a smart idea. Using a gapping tool, you can check if the gap between the ground electrode above the spark plug’s center electrode is the appropriate size. The spark on your spark plug ignites here.
A pair of boot pliers, a length of rubber tube, a clean rag, some rubbing alcohol, a tube of anti-seize, compressed air, or a wet/dry vacuum may also be useful to have on hand. Although not necessary for a straightforward spark plug replacement task, these supplies can make sure that everything goes according to plan.
How can a faulty spark plug be identified?
1) Your car starts slowly. It makes sense that we typically blame the battery for a car’s inability to start. However, worn-out spark plugs can also be the issue. Your automobile won’t move if there is no ignition, which means there will be no spark. 2) Your automobile idles poorly. Even if your automobile does start, faulty spark plugs will continue to cause issues for a long time. In a perfect world, your automobile shouldn’t rattle while idling and its engine should sound smooth. However, faulty spark plugs will result in a jerky and harsh idle. 3) Your engine may occasionally misfire. Have you ever noticed that your automobile briefly stops or hesitates when you’re driving? This might be the case as a result of improper cylinder firing, which frequently results from a bad spark plug. 4) The engine revs up. Similarly, you can occasionally experience your automobile jerking before slowing down or seeming to start and stop. This is another sign of a faulty plug since it sometimes indicates that more air is being taken in during the combustion process. 5) You are using more fuel than normal. Because it occasionally performs an incomplete combustion, a faulty spark plug uses fuel inefficiently, effectively wasting the fuel it is intended to burn. This may result in a 30% reduction in fuel efficiency. 6) Your vehicle isn’t accelerating properly. A defective spark plug may also be to blame if you press the gas and don’t get the reaction you’re used to. All of this proves, as you can see, that a functioning, clean-burning spark plug is vitally necessary to your car’s continued performance.