Online ordering is now open for Hyundai Santa Fe License Plate Light Mini Bulb.
In This Article...
facecard
I own a 2007 Santa Fe 4 door model. I’ll need to buy new license plate bulbs because the old ones have ceased working. The issue is that I can’t open the lid to access the bulbs since the screws have rusted away. Unfortunately, in order to access the bulbs, I had to pull out the cover.
1. From where can I purchase stainless steel screws to swap out my old, rusted ones?
2. Where can I obtain the component that houses the license plate bulb?
I would like to purchase new ones as well as new screws to hold in place as I had to dislodge the housing that held the bulb.
Anonymous
Hello, have you not yet enjoyed this on Christmas? but will make an effort to assist depending on which side is on? To obtain access or a view, would I first remove the screws securing the front of the under-engine plastic cover/shield? if there is a cover on, to the back of the fog lamp? try removing by turning counterclockwise? if the rubber cover comes off, or? then the bulb and clip ought should be apparent. Do you generally just connect the two top ends of the spring clip keeping the bulb in place and swing it down and out to remove it after unplugging the cable from it? correctly reinstall a new bulb! pay attention to where the old bulb is located? it would be prudent to check that the bulb works at this point before clipping securely and reconnecting the cable. prior to reassembling everything else? wishing you luck and hoping that this resolves your issue?
Sylvania 2825 Long Life Incandescent Mini Bulb (Pack of 2) * Sylvania 2825 SilverStar Incandescent Mini Bulb (Pack of 2) * 2013 Hyundai Santa Fe – License Plate Light Bulb
How is a license plate light bulb installed?
It’s easy to replace a burned-out number plate bulb:
- Find your license plate lights first. Most cars have two little lights right over the license plate. It’s a good idea to replace both of these bulbs at once, even if only one of them has blown. If one bulb blows, it’s likely that the other will not be far behind.
- A Phillips head screwdriver should work to remove the lamp cover. Each lid will have two screws. Put the screws in a secure location so you can replace them later.
- Old bulbs should be removed. Most of the time, it will be simple to remove. For confirmation that you have the right bulb, check the fitting on it (or the car manual).
- Place the new bulb in. LEDs can replace incandescent bulbs, however the replacement bulb should fit without any difficulty. Be careful not to touch the bulb’s glass.
- Reinstall the cover and tighten the screws.
- To check that your new light is functioning, start your car and all of the lights. LEDs should turn on right away but incandescent bulbs could need a few seconds to warm up. Ensure that the new bulbs you buy have enough brightness to clearly illuminate your license plate.
That’s all, then! If you fitted LEDs, your license plate bulbs should survive for a very long time. In order to prevent getting stopped by the police, make sure to check them frequently.
Do Hyundai Santa Fe headlights contain LEDs?
The external design of the 2019 Hyundai Santa Fe can make you fall in love at first sight. There is no questioning the attention to detail in the design, which included numerous aspects into something as basic as the window glass. You’ll also fawn over chic additions like the shark fin roof antenna. To understand more about the external design elements and specifics of the 2019 Hyundai Santa Fe, continue reading below.
Why don’t my license plate lights function?
The license plate lights on your car work properly if the relay switch is in good condition and there are no loose connections. Therefore, if you find that your car’s license plate lights won’t turn on, it’s possible that your relay switch is broken or that one or more cables are improperly connected.
It’s possible that the license plate lights are burned out in some instances. To determine why your car’s license plate lights aren’t working, try to determine if you are dealing with any of the issues mentioned above. In any instance, you might need to hire a skilled auto technician to assist you in resolving the problem.
Are LED license plates allowed?
There are no limitations on how many lights can be installed on the car. The back number plate’s adequate illumination is the only requirement.
Can the lights on license plate be too strong?
What generally applies: Number plate illumination should illuminate the full number plate surface and be bright enough but not too bright. Specific guidelines for color and brightness exist.
Can a filthy license plate result in a fine?
Most people can put up with a less-than-perfect car, but did you know that having a dirty number plate might result in a fine? Drivers who operate a vehicle with an unreadable license plate risk receiving severe fines.
What does a number plate’s blue strip mean?
Numerous license plates for cars have a blue strip on the left side that features the EU flag and the letters “GB.” The same was visible on driving permits as well.
But now that the UK has left the EU, the government has planned a “makeover” for both. Due to the change in look, neither licenses nor number plates will now display the EU flag.
Existing licenses and plates will remain valid, but only new or renewed ones will now come with the new-style licenses.
The announcement follows the government’s confirmation of easier international driving for UK drivers. Due to new accords, British citizens won’t need an international driving permit to drive throughout the EU’s 27 member states, and many will no longer require them to display a “GB sticker” as long as their license plate displays the Union Jack or Great Britain.
“Changing the designs of our driving licenses and number plates is a historic occasion for British motorists, and a reassertion of our independence from the EU one year after our leave,” said Transport Secretary Grant Shapps.
“Looking ahead, these reforms guarantee that those who wish to drive in the EU may continue to do so easily, whether it’s for work or for holidays abroad.”
Shapps displayed the updated look on Twitter, replacing the EU flag with the Union Flag. Since January 1, the fresh designs have been released in initial batches.