- Switch the car off. Pull the emergency brake lever. Place the gearshift in park. Behind the front wheels, place a block or wheel chocks.
- raise the car on jacks. To support the car, place jack stands underneath the frame. Work under a car that is supported only by a car jack.
- Take off the tire and rear wheel.
- Lower the parking brake handle inside the vehicle to release the parking brake. Make sure the front wheels are immobilized and the car won’t roll off the jack stands or roll away before releasing the parking brakes.
- The two caliper mounting bolts must be removed. Rear caliper assembly removal is now possible. Old brake pads should be removed.
- The caliper carrier bolts must be removed. The bolts are 14 mm. To remove them, you might need to use a breaker bar.
- The two Phillips screws holding the rear brake disc in place must be removed. To discover how to carry out these tasks, view the video after this one.
- Put in the fresh rear disc. The two Phillips screws should be tightened to the following specifications.
- Tighten the bolts to 55 ft-lb after installing the rear brake caliper carrier.
- Replace the brake pads. Apply brake pad lubricant when necessary and clean the brake pad retainers (shims).
- The brake caliper sliding bolts should be tightened to 20 lb-ft.
- Check the Hyundai Elantra’s rear brake pads.
Hyundai Elantra rear brake pad replacement takes 30-45 minutes per side. The replacement of the rear brake pads will take a total of two hours. Make sure the appropriate equipment and parts are available.
In This Article...
What is the price of replacing the brakes on a 2016 Hyundai Elantra?
Depending on the brake pad type chosen and the degree of harm your old, worn-out brake pads caused to your car’s other parts, such the rotors, replacing the brake pads on a 2016 Hyundai Elantra can cost anywhere between $150 and $300 each axle.
How much does a Hyundai Elantra brake replacement cost?
Depending on the type of brake pads chosen and the extent of the harm your previous worn-out pads caused to other parts of your car, including the rotors, replacing the brake pads on a Hyundai Elantra can cost anywhere between $150 and $300 each axle.
Rear brakes on a Hyundai Elantra?
Changing the rear brake pads on a 2019 Hyundai Elantra Every time you take your car to the shop, you’ll choose to have your brakes tested, but you should also refer to your 2019 Hyundai Elantra maintenance plan for information on when inspections and rear brake pad replacement are advised.
Hyundai Elantra brake replacement frequency
How long do the brake pads on a Hyundai Elantra last? Depending on how you drive, the brake pads on a Hyundai Elantra typically last between 30,000 and 70,000 miles. You’ll need to have an examination more frequently if you commute in heavy traffic and use your brakes frequently.
Which brakes brand does Hyundai employ?
Cars like your Hyundai use what are referred to as “friction” brakes on a fundamental level. These brakes stop the car by making contact between two different types of materials. Disc brakes and drum brakes are both types of friction brakes.
Rotor costs for a Hyundai Elantra.
For a 2021 Hyundai Elantra, how much do rotors cost. Depending on the type of rotor and whether you wish to install them yourself, the price of rotors alone usually ranges from $50 to $125 per rotor at retail.
Can I replace my own brake pads?
- Depending on your vehicle and driving style, brake pads should be replaced every 25,000 to 75,000 miles. You’ll discover that most professionals and automakers advise changing your brake pads every 50,000 miles on average.
- As part of your standard inspection, ask your mechanic to check your brake pads on a regular basis. Always remember to examine your brake pads to see if they appear worn if you prefer to perform your own vehicle inspections. When you notice severe wear on your brake pads, replace them right once to keep your car safe.
- Squealing, squeaking, and grinding noises are indications of wear. It’s probably time for a replacement if your automobile pulls to one side more than the other when you press the brake pedal or if you experience bouncing when coming to a stop.
- Your car’s performance, dependability, and safety can all be enhanced by replacing the brake pads. You can tackle replacing your own brake pads as a DIY project if you’re confident performing your own vehicle maintenance. As with any auto modification or repair, check your owner’s manual for any special instructions or instructions before you start.
Does changing your own brakes save money?
If you’ve ever had your brakes serviced, you are aware of the high cost. The majority of larger brake shops, like Les Schwab, won’t just swap out your brake pads. Your rotors will need to be resurfaced or replaced, and they’ll probably also suggest replacing the calipers. A straightforward brake pad replacement that should only cost $40 can end up costing $500 or more. Therefore, every time you replace your own brake pads, you might save $450.
Check out this as well: On their brake pads, certain auto parts retailers may offer you a “Lifetime Warranty.” When these pads are used, many customers simply return them to the store for a free replacement. The Autozone Cmax brake pad line is one of these pads. They have a lifetime warranty, and there are numerous accounts of customers exchanging their worn out pads for free replacements without any inquiries.
How much are brake repairs at Hyundai priced?
How much does it cost to replace or repair brakes? Depending on your Hyundai’s model and the kind of repairs required, you may need to have your brakes repaired or replaced. Currently, labor costs for Hyundai brake repairs and replacements are $90.00 per hour, with prices ranging from $157.00 to $399.00.
When should brake pads be replaced?
Consider this: even a skilled automotive technician needs at least an hour to replace the braking rotors and pads on some cars. Brake pad repair could take several hours or longer for a person with little to no skill.
Learning the procedure, assembling the necessary supplies, carefully carrying out each step, and then putting everything back together again might easily take up a half-day of effort that may not be worthwhile in the end.
You might need to start over to fix the issue and correctly install the new brake pads if you complete the procedure only to discover that the brake pedal feels strange or that your brakes have begun to screech or grind. What a pain in the neck!
An easy approach that might ultimately save you time and money is to have a professional do your brake pad repair.
How durable are Hyundai brake pads?
How durable are Hyundai brake pads? Depending on your driving habits, Hyundai brake pads typically last between 30,000 and 70,000 miles. You’ll need to have an examination more frequently if you commute in heavy traffic and use your brakes frequently.
How durable are Hyundai brake rotors?
The type of rotors, your driving habits, the conditions of your daily journey, and the kind of vehicle you’re driving all play a significant role in the answer. According to the aforementioned criteria, Hyundai rotors typically need to be replaced every 30,000 to 80,000 miles.
Rotors are part of a brake job, right?
Both the pads and the rotors must be replaced for a comprehensive braking service. While initially more expensive, replacing the pads and rotors at the same time will make both last longer and ultimately improve brake performance. Because there is less chance of warping or uneven wear, both of which can lessen stopping power, replacing the entire brake set is also typically safer.
Fortunately, new varieties of rotors are reasonably priced, especially when you consider the expense of milling your old rotors only to replace them once more later on. This may help to explain why more and more maintenance facilities advise replacing brake rotors rather than refinishing them.
How long does a complete brake job take?
It can take anywhere from 15 minutes to 8 hours to fix a brake. On average, they will often take one to three hours.
Different brake repair kinds exist, some of which need more time than others. While manufacturing new brake lines or changing the brake master cylinder typically takes longer, replacing brake pads or shoes is typically (though not always) quite simple.
It’s more difficult to work on some cars than others. It might take more effort to remove stripped lugs or rusted components. Additionally, some establishments offer extra services like maintaining calipers or carefully examining rotors to see whether they require replacement.
Brake pad replacements, such as a rapid pad switch, don’t take very long. You don’t just want the pads switched, though. A qualified mechanic will check the brakes and make sure the vehicle is otherwise safe to drive.
The garage is how busy that day? You might have to wait a while if they have a lot of automobiles to work on and are handling them in the order they were received. Additionally, the availability of parts in stock should be taken into account. More parts might be required, which could take some time.
When you take your automobile in for service, always strive to acquire two estimates: the cost and the estimated time of completion. Do your research to find a better offer, too!
What should I expect to pay for new front brakes?
The majority of the braking in your car, typically 70%, is performed by the front brakes. These brake pads frequently overheat, which can cause them to screech, grunt, or grind. The cost of replacing a front brake pad ranges between $115 and $300 on average, which is comparable to the price of replacing a rear brake pad. These materials come in a variety of grades, from cheap to expensive.
Is replacing rotors or turning them better?
In most cases, turning your rotors is unnecessary if their surface is smooth. However, if they are warped or have rough places, they should be rotated or, if necessary, replaced. If your pedal-pressing movement results in a firm, uninterrupted braking action, this is simple to identify.
The purpose of brake grease
For brakes to work effectively, they need to be greased appropriately. Although the actual brake pads themselves should never be greased, there are many other moving parts in the system that do. When needed, brake grease makes sure these parts may move without restriction. Therefore, when the brake is engaged, the braking system will function as expected. Brake grease also extends the lifespan of brakes, stops shrieking, and lessens vibration when applying the brakes.