How To Change Brake Light 2012 Hyundai Santa Fe?

Get 2011 Hyundai Santa Fe Brake Light Mini Bulb at AutoZone for your automobiles, trucks, and SUVs.

Why do the brake lights on my Hyundai Santa Fe keep coming on?

Bad Switch: A faulty or failed switch is a typical cause of the Parking Brake light remaining on. You may quickly verify this by jiggling the handle once it has been lowered. The switch is most likely to be the problem and needs to be replaced if the light goes out (or goes out and comes back on).

If the brake handle is not fully down, there is another factor that could cause the light to remain on. Verify again that the parking brake is released and that the handle is fully lowered. The light will remain on if the parking brake cable is under any stress.

Parking Brake Not Disengaging: Occasionally, the parking brake itself is the source of the issue rather than the switch or the wires. The dash warning light will remain on if the brake does not release when the handle is dropped.

Low Brake Fluid: Your Parking Brake light is a multipurpose device that is intended to turn on when the reservoir’s fluid level falls below a specific level. As the fluid level fluctuates, you might see the light turning on or off when making turns.

The brake fluid level sensor in your master cylinder is malfunctioning. It is sometimes integrated into the reservoir cap, and other times it is positioned on the side of the sensor. The Parking Brake light will come on if the sensor malfunctions or becomes faulty.

Uneven Fluid Pressure: If your automobile has uneven brake fluid pressure in one or more lines, it may influence how well it can stop and may even cause it to pull to one side or the other. The parking brake light in your dash can also be activated by it.

How can I turn off the dashboard brake light?

RISK: Despite changing the brake pads and associated wear sensors, the dashboard braking system warning light continues to flicker. Steps to take:

  • To check that the brake pads and discs are in contact, repeatedly press the brake pedal.
  • Turn off the dashboard for a brief period of time.
  • Check to check if the light is still on after turning on the dashboard once again. Ask for help and guidance if the brake warning light is still on.

Only for entertainment and informational reasons, the information in this article should not be used as a substitute for consulting a qualified technician or mechanic for expert guidance. We advise you to speak with a licensed technician or mechanic if you have any specific queries or issues regarding any of the subjects discussed here. We will not, under any circumstances, be held responsible for any loss or harm resulting from your reliance on any content.

Why won’t the brake lights on my 2012 Hyundai Sonata turn off?

Due to a problem with the brake pedal assembly that, in certain cases, prevents the brake lights from turning off, Hyundai is recalling 304,900 Sonata cars from the 2011 and 2012 model years.

The brake pedal stopper pad, which can eventually wear down and allow the brake light switch to stay on after the driver lifts their foot from the brake pedal, is at problem. In these circumstances, the Sonata is capable of continuing to drive while the brake lights are illuminated in the “braking” position, which can give other motorists the wrong impression. Additionally, this issue can make it possible to shift out of park without depressing the brake pedal. Even while Hyundai reports that the second issue hasn’t resulted in any accidents, it is this second issue that is more concerning.

The Hyundai Sonata automobiles produced from December 11, 2009, to June 30, 2011, are subject to the recall campaign.

On January 11, Hyundai will begin the recall procedure, and dealers will apply the repair. Owners may bring their cars in to have this problem addressed at no charge; the fix simply entails installing a new stopper pad.

Owners should reach Hyundai customer service directly at 1-855-671-3059 and reference recall number 136 prior to the start of the recall. They can also visit the National Highway Traffic Safety Administration (NHTSA) website at or dial the vehicle safety hotline at 1-888-327-4236.

Ramey, Jay

For his own personal use, Jay Ramey has been drawn to the more adventurous end of the reliability spectrum because he spent his childhood around really unusual European cars.

How is the third brake light cleaned?

The third brake light’s release tabs can be found in the back glass under the trunk when it is opened. Once it pops out from between them, you can remove it for cleaning.

Is AutoZone a brake light switch replacement shop?

Problems with the brake light switch or turn signals A replacement switch can be placed after checking the connection to the switch for corrosion or damage and buying it from your nearby AutoZone.

Why do my brake lights continue to be on?

Your brake lights staying on is most frequently caused by a broken brake light switch or sensor. The electrical system malfunctioning or a faulty brake pedal are some potential causes. If this happened after you recently changed the rear light bulbs, you might have fitted the incorrect bulbs.

Your locked brake light is most likely brought on by one of these issues. Let’s take a closer look at each sign of a bad brake light.

Why won’t the brake lights on my back go out?

A broken brake light switch is a common reason why a car’s brake lights won’t turn on. This part is attached close to the brake pedal under your dash. Your light switch may be stuck closed or the component may have failed if your lights are out.

Other signs of a broken brake light switch include malfunctioning brake lights, impaired cruise control, a car that won’t shift out of park, and brake lights that come on while you’re driving.

Why do my brake lights remain illuminated while the car is off?

When the brake pedal is depressed, the brake lights, which are a component of the tail light, turn on. The most frequent reason for brake lights remaining on when the car is off is a faulty brake light switch or brake light switch stopper.

The bulbs in brake lights all the same?

While the brake lights only activate when the brake pedal is pushed, the tail lights turn on instantly when the driver turns on the headlights. Even though both lights are red, brake lights often have a red light that is significantly brighter.

Depending on the type of vehicle. Dual-filament bulbs are used in many automobiles to combine the brake and tail lights into one. Here, every filament is connected to a different circuit. The thicker filament, which provides a brighter light, is utilized for brake lights, while the thinner filament illuminates as a tail light. While in certain automobiles, the brake and taillights are lit by independent lightbulbs.

Let’s look at what those lights are and what they function in order to better comprehend the distinctions between the brake light and the tail light.

Is the brake light bulb the same in all cars?

It’s time to install the brake light bulb you choose after making your selection. If you’re feeling confident, you can replace the brake light bulb yourself at home on many cars because it’s not particularly difficult. Any queries you may have can be answered by your auto electrician.

Here is a step-by-step instruction manual for changing your brake light bulbs. Please remember that this is simply a general overview. Since every automobile is unique, some bulbs might not be able to be changed in this manner. We strongly advise you to consult the car manual or speak with your auto electrician if you have any questions.

Are brake lights battery draining?

Your battery will become discharged if your brake lights are left on. While the automobile is off or until this problem is fixed, you must unplug your battery.

The brake light switch sticking closed is the most likely reason why the brake lights are still on. If the lights don’t turn off, you might try unplugging the brake light switch at the pedal. If they do, a new brake light switch is required. If not, you will require more electrical diagnosis.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our

How similar are 1157 and 2357 bulbs?

The 2357 bulb has a shorter life expectancy than the 1157. The high filament of the 2357 bulb is substantially shorter than that of the 1157, with the 2357 rated at 400 hours compared to 1200 hours for the 1157. The low filaments have the same life expectancy value of 5000 hours.