The battery in your Hyundai key fob is simple to change. A replacement CR 2032 3V battery is all that is required. They typically cost between $3 and $5 for a pack of 5. Wearing latex gloves is advised because you will be contacting a motherboard during this process, which could result in unintended harm.
- Remove the emergency key from the fob’s base.
- Between the release button and the key slot, insert the key.
- Turn the key until the fob pops open as if you were unlocking a door.
- Open the fob while facing the buttons downward (otherwise they will fall out).
- Remove the barrier and motherboard, then set aside the button-side of the fob.
- Remove the dead battery from its mount using the key.
- Place the + side of the new battery in its bracket.
- Replace the fob’s button-half, motherboard, and barrier.
- Set the release button peg in the appropriate hole.
- Reassemble the fob with a snap.
You’re done now! Press any button to put your Hyundai Smart Key to the test. If all was done correctly, a tiny red light should flash over the unlock button.
In This Article...
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
Which battery powers the Hyundai remote control?
A CR2032 battery powers the majority of Hyundai key fobs. Once you have a new Hyundai key fob replacement battery in your possession, insert it into your key fob exactly where the old one was. Check to see if the battery is in contact with each connection.
Can I get a new remote for my car starter?
Depending on the package you select, you can install a remote starter that comes with either one or two car key fobs if your vehicle doesn’t already have one.
How can I reprogramme my car remote?
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position.
This notifies the electronic control modules in your automobile that the signal is coming from your key in the ignition, and it then saves the information.
The battery is drained by a remote starter.
All remote starts, regardless of whether they are manufactured by Compustar, Arctic Start, or another company, will drain your battery. However, if your battery is overdrawn by the starter, your car may not start.
Does your automobile have a remote starter? Congratulations if so. Being able to start your car without getting out and fussing with locks or keys makes you one of the fortunate few.
Yes, this convenience comes with a price: research has shown that using a remote starter causes your battery to discharge more faster than if you had turned the key in the ignition to start the engine manually. However, for a lot of people—especially those with hectic schedules—the advantages exceed any drawbacks. Additionally, there are techniques to stop battery loss while utilizing your remote starter.
How long does a battery for a remote automobile starting last?
How Long Are Key Fobs Good For? The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years.
After changing the battery, how do I program my key fob?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
Without Bluelink, can I remotely start my Hyundai?
No, only Hyundai vehicles with push-button start key fobs and either an automatic transmission or a dual clutch transmission are eligible for the remote start option (DCT). Even said, not all models provide Remote Start. In addition, using Remote Start requires a Blue Link Remote Package membership.
I can’t get my Hyundai key fob to open.
By pressing and holding the metal tab or button, start by withdrawing the metal key. Next, insert the metal key into the little opening and turn it in either way to release the back cover of your key fob. The case ought to instantly open.
How can I tell if my car has remote starting from the factory without a key?
How can I tell if my secondhand automobile has a remote start built in from the factory? I’ve only had this car for a short while, and I still don’t know how to use it.
In less than two minutes, find out if your auto insurance is being overcharged.
a
Learning how to use a new car’s many special features might be challenging! There are a couple ways to find your car, though, if it has a remote start.
The key fob itself serves as the initial location. The key fob should feature the following buttons:
- Lock your car.
- Lock the vehicle
- Crack the trunk.
- start the vehicle
Look in the glove box for the user manual if you can’t find a start option. Used automobiles frequently include the original owner’s manual.
Another choice is to take note of the VIN from your auto insurance or window sticker and use it to look up various characteristics. Try using a website like Carfax, which provides a list of vehicle characteristics connected with the VIN.
In the worst case, call the dealership. The dealer will have information about the caras features and can give you instructions on how to use them.
Spend some time looking into your auto insurance to make sure you are still getting the greatest bargain when you are looking into your car. The Jerry app can be downloaded to help! Every six months, Jerry’s licensed agents automatically check your policy and, if they discover that you are overpaying, they send you a free estimate right to your phone.
After changing the battery, does the key fob need to be reprogrammed?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
Why won’t my key fob operate now that the battery has been changed?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
What symptoms indicate a low key fob battery?
When the battery in the fob gets weaker, the transmitter’s range decreases. Your range is deteriorating if you find that you need to be much closer to your automobile than usual. This serves as a reminder to replace your battery. Other signs comprise:
- If your key doesn’t signal at all
- If you have to click the button several times before your car responds
- If your key remote behaves erratically or inconsistently
Can a key fob with a low battery prevent a car from starting?
Yes, a key fob with short battery life may prevent your automobile from starting. The key fob for your automobile is an electrical gadget with a battery inside that powers signals sent from the key fob to your car. Your car’s computerized systems get alerts in accordance with the key fob commands you press, and the vehicle subsequently reacts as necessary.
This function depends on the battery in your car’s key fob; if it runs out, you might not be able to start your car without a jumpstart. Your ability to start your car may be affected if the battery in your Honda keyless remote is low.
Can I customize my Hyundai key fob myself?
Remember that in order for the key fob programming instructions to be effective, you must already have a key fob that has been pre-programmed to a previous Hyundai that you have owned. To have a skilled technician program the key fob to your car if you are buying a new Hyundai, you must go to a Hyundai service center.
What takes place if my key fob’s battery dies?
My car’s key fob seems to be coming in and going out, though. I know I merely need to replace the battery, but I don’t have much free time. What if the key fob entirely fails while I’m operating the vehicle?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
If time is of the essence, you should be aware that changing the battery in your key fob just requires two minutes, albeit you will need to visit a general store or pharmacy to obtain the battery.
Why not change the battery in your car insurance at the same time as you replace the one in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
What renders your remote start inoperable?
Your remote starter won’t operate if your hazard lights are turned on. Your starter should work properly once you turn them off. Your remote starter system will be disabled if your vehicle’s coolant temperature or oil pressure are too high or low, respectively.
Are key fobs replaced by AutoZone?
AutoZone does offer key duplication services for cars made by Toyota, Ford, Honda, Dodge, GMC, Mercedes, Kia, and other manufacturers. These services include key duplication, transponder keys, key fobs, and vehicle key blanks.